PIC18LF24K50-E/SO

Product Overview

Use

This microcontroller is commonly used in various electronic devices and embedded systems for controlling and processing data.

Characteristics

Low power consumption
High performance
Enhanced connectivity options
Rich set of peripherals
Flexible memory options

Package

The PIC18LF24K50-E/SO comes in a small outline (SO) package, which is suitable for surface mount applications.

Essence

The essence of this microcontroller lies in its ability to provide efficient control and processing capabilities in a compact form factor.

Packaging/Quantity

The PIC18LF24K50-E/SO is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

Microcontroller Family: PIC18
Core Size: 8-bit
CPU Speed: Up to 48 MHz
Program Memory Size: 16 KB
RAM Size: 768 bytes
Number of I/O Pins: 22
ADC Channels: 10
Communication Interfaces: UART, SPI, I2C, USB
Operating Voltage Range: 2.0V to 5.5V
Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The PIC18LF24K50-E/SO has a total of 28 pins, each serving a specific purpose. Here is a detailed pin configuration:

VDD - Power supply voltage
RA0 - General-purpose I/O pin
RA1 - General-purpose I/O pin
RA2 - General-purpose I/O pin
RA3 - General-purpose I/O pin
RA4 - General-purpose I/O pin
RA5 - General-purpose I/O pin
VSS - Ground
OSC1/CLKIN - Oscillator input
OSC2/CLKOUT - Oscillator output
RC0 - General-purpose I/O pin
RC1 - General-purpose I/O pin
RC2 - General-purpose I/O pin
RC3 - General-purpose I/O pin
RC4 - General-purpose I/O pin
RC5 - General-purpose I/O pin
VUSB - USB power supply
D- - USB data minus
D+ - USB data plus
RB0 - General-purpose I/O pin
RB1 - General-purpose I/O pin
RB2 - General-purpose I/O pin
RB3 - General-purpose I/O pin
RB4 - General-purpose I/O pin
RB5 - General-purpose I/O pin
RB6 - General-purpose I/O pin
RB7 - General-purpose I/O pin
VDD - Power supply voltage

Functional Features

The PIC18LF24K50-E/SO offers several functional features that enhance its usability and performance:

Enhanced UART module for serial communication
SPI module for synchronous serial communication
I2C module for inter-integrated circuit communication
USB module for USB connectivity
10-bit Analog-to-Digital Converter (ADC) for analog signal processing
Timers and PWM modules for precise timing and control
Interrupt handling for efficient event-driven programming
Low-power modes for energy-efficient operation

Advantages and Disadvantages

Advantages

Low power consumption enables battery-powered applications
High-performance CPU allows for fast data processing
Rich set of peripherals provides flexibility in design
Wide operating voltage range accommodates various power sources
Compact form factor suits space-constrained applications

Disadvantages

Limited program memory size may restrict complex applications
Relatively small RAM size may limit data storage capacity
Lack of built-in Ethernet or Wi-Fi connectivity options

Working Principles

The PIC18LF24K50-E/SO operates based on the principles of a typical microcontroller. It executes instructions stored in its program memory, interacts with peripherals and I/O pins, and responds to external events through interrupts. The CPU processes data, controls the flow of execution, and communicates with other devices using various communication interfaces.

Detailed Application Field Plans

The PIC18LF24K50-E/SO finds application in a wide range of fields, including but not limited to:

Consumer electronics: Remote controls, smart home devices, wearable gadgets.
Industrial automation: Process control systems, monitoring devices, motor control.
Automotive: Engine control units, dashboard displays, lighting control.
Medical devices: Patient monitoring systems, diagnostic equipment, infusion pumps.
Internet of Things (IoT): Sensor nodes, edge computing devices

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací PIC18LF24K50-E/SO v technických řešeních

Question: What is the maximum operating frequency of PIC18LF24K50-E/SO?
Answer: The maximum operating frequency of PIC18LF24K50-E/SO is 64 MHz.
Question: What are the key features of PIC18LF24K50-E/SO?
Answer: PIC18LF24K50-E/SO features include 16KB Flash program memory, 768 bytes of RAM, and 256 bytes of EEPROM data memory.
Question: Can PIC18LF24K50-E/SO be used for USB applications?
Answer: Yes, PIC18LF24K50-E/SO has built-in USB 2.0 support, making it suitable for USB applications.
Question: What are the communication interfaces supported by PIC18LF24K50-E/SO?
Answer: PIC18LF24K50-E/SO supports SPI, I2C, and UART communication interfaces.
Question: Is PIC18LF24K50-E/SO suitable for low-power applications?
Answer: Yes, PIC18LF24K50-E/SO features low-power modes, making it suitable for battery-powered or energy-efficient applications.
Question: What development tools are available for programming PIC18LF24K50-E/SO?
Answer: Development tools such as MPLAB X IDE and MPLAB XC8 compiler can be used to program PIC18LF24K50-E/SO.
Question: Can PIC18LF24K50-E/SO be used in industrial control applications?
Answer: Yes, PIC18LF24K50-E/SO is suitable for industrial control applications due to its robust features and peripherals.
Question: What are the available package options for PIC18LF24K50-E/SO?
Answer: PIC18LF24K50-E/SO is available in a 28-pin SOIC package.
Question: Does PIC18LF24K50-E/SO have analog-to-digital conversion (ADC) capabilities?
Answer: Yes, PIC18LF24K50-E/SO features 10-bit ADC with multiple channels.
Question: Are there any application notes or reference designs available for PIC18LF24K50-E/SO?
Answer: Yes, Microchip provides application notes and reference designs for integrating PIC18LF24K50-E/SO into various technical solutions.