Microchip Technology
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
PIC18LF24J10-I/SP
Zobrazit detail DataSheets

PIC18LF24J10-I/SP

Product Overview

Category

The PIC18LF24J10-I/SP belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems for controlling and processing data.

Characteristics

  • Low power consumption
  • High performance
  • Enhanced connectivity options
  • Ample memory capacity
  • Versatile input/output capabilities

Package

The PIC18LF24J10-I/SP is available in a 28-pin Small-Outline Integrated Circuit (SOIC) package.

Essence

The essence of this microcontroller lies in its ability to provide efficient control and processing capabilities in a compact form factor.

Packaging/Quantity

The PIC18LF24J10-I/SP is typically packaged in reels or tubes, with a quantity of 100 units per package.

Specifications

  • Microcontroller Family: PIC18
  • Core Architecture: 8-bit
  • CPU Speed: Up to 40 MHz
  • Program Memory Size: 16 KB
  • RAM Size: 1.5 KB
  • Data Bus Width: 8-bit
  • Number of I/O Pins: 25
  • ADC Channels: 12
  • UART Modules: 2
  • SPI Modules: 1
  • I2C Modules: 1
  • Operating Voltage Range: 2.3V to 5.5V
  • Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PIC18LF24J10-I/SP has a total of 28 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. RA0 - General-purpose I/O pin
  3. RA1 - General-purpose I/O pin
  4. RA2 - General-purpose I/O pin
  5. RA3 - General-purpose I/O pin
  6. RA4 - General-purpose I/O pin
  7. RA5 - General-purpose I/O pin
  8. VSS - Ground
  9. OSC1/CLKIN - Oscillator input
  10. OSC2/CLKOUT - Oscillator output
  11. RC0 - General-purpose I/O pin
  12. RC1 - General-purpose I/O pin
  13. RC2 - General-purpose I/O pin
  14. RC3 - General-purpose I/O pin
  15. RC4 - General-purpose I/O pin
  16. RC5 - General-purpose I/O pin
  17. RC6/TX/CK - UART transmit pin
  18. RC7/RX/DT - UART receive pin
  19. RB0/INT0 - External interrupt input
  20. RB1/INT1 - External interrupt input
  21. RB2/INT2 - External interrupt input
  22. RB3/CCP2 - Capture/Compare/PWM pin
  23. RB4/SDI/SDA - SPI/I2C data input
  24. RB5/SDO/SCL - SPI/I2C data output
  25. RB6/PGM - In-Circuit Serial Programming pin
  26. RB7/PGC - In-Circuit Debugger clock pin
  27. RB8/PGD - In-Circuit Debugger data pin
  28. MCLR/VPP - Master Clear/Voltage Programming pin

Functional Features

The PIC18LF24J10-I/SP microcontroller offers the following functional features:

  • High-speed processing capabilities
  • Multiple communication interfaces (UART, SPI, I2C)
  • Analog-to-Digital Converter (ADC) for precise analog measurements
  • Enhanced Capture/Compare/PWM (CCP) module for advanced control applications
  • In-Circuit Serial Programming (ICSP) and In-Circuit Debugger (ICD) support for easy programming and debugging

Advantages and Disadvantages

Advantages

  • Low power consumption enables energy-efficient designs
  • High-performance capabilities cater to demanding applications
  • Ample memory capacity allows for complex program storage
  • Versatile input/output capabilities provide flexibility in interfacing with external devices

Disadvantages

  • Limited number of I/O pins may restrict the connectivity options in certain applications
  • Relatively higher cost compared to some other microcontrollers in the market

Working Principles

The PIC18LF24J10-I/SP operates based on the principles of a typical microcontroller. It executes instructions stored in its program memory, interacts with various peripherals, and processes data according to the program logic. The microcontroller's central processing unit (CPU) fetches instructions from memory, performs calculations, and controls the flow of data within the system.

Detailed Application Field Plans

The PIC18LF24J10-I/SP finds applications in various fields, including but not limited to:

  1. Industrial automation systems
  2. Consumer electronics
  3. Medical devices
  4. Automotive electronics

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací PIC18LF24J10-I/SP v technických řešeních

  1. What is the maximum operating frequency of PIC18LF24J10-I/SP?
    - The maximum operating frequency of PIC18LF24J10-I/SP is 32 MHz.

  2. What are the key features of PIC18LF24J10-I/SP?
    - Some key features of PIC18LF24J10-I/SP include 16KB Flash program memory, 256 bytes of EEPROM data memory, and 256 bytes of SRAM.

  3. Can PIC18LF24J10-I/SP be used in battery-powered applications?
    - Yes, PIC18LF24J10-I/SP is suitable for battery-powered applications due to its low power consumption.

  4. What communication interfaces does PIC18LF24J10-I/SP support?
    - PIC18LF24J10-I/SP supports SPI, I2C, and UART communication interfaces.

  5. Is PIC18LF24J10-I/SP suitable for industrial control applications?
    - Yes, PIC18LF24J10-I/SP is suitable for industrial control applications due to its robust design and wide operating temperature range.

  6. Can PIC18LF24J10-I/SP be programmed using a high-level language like C?
    - Yes, PIC18LF24J10-I/SP can be programmed using high-level languages like C, making it easier for developers to write and maintain code.

  7. What development tools are available for PIC18LF24J10-I/SP?
    - Development tools such as MPLAB X IDE and MPLAB XC8 compiler are available for programming and debugging PIC18LF24J10-I/SP.

  8. Does PIC18LF24J10-I/SP have built-in analog-to-digital converters (ADC)?
    - Yes, PIC18LF24J10-I/SP has a 10-bit ADC with up to 13 channels for analog input.

  9. Can PIC18LF24J10-I/SP be used in automotive applications?
    - Yes, PIC18LF24J10-I/SP is suitable for automotive applications due to its robustness and ability to withstand harsh environments.

  10. What are the available package options for PIC18LF24J10-I/SP?
    - PIC18LF24J10-I/SP is available in a 28-pin SPDIP package, making it easy to integrate into various electronic designs.