Microchip Technology
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
PIC18F46K80-I/P
Zobrazit detail DataSheets

PIC18F46K80-I/P

Product Overview

Category

The PIC18F46K80-I/P belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic applications that require embedded control and processing capabilities.

Characteristics

  • High-performance 8-bit architecture
  • Flash program memory
  • Low power consumption
  • Wide operating voltage range
  • Enhanced peripheral integration
  • Robust communication interfaces

Package

The PIC18F46K80-I/P is available in a standard 40-pin DIP (Dual Inline Package) format.

Essence

The essence of the PIC18F46K80-I/P lies in its ability to provide efficient and reliable control and processing capabilities for a wide range of electronic devices and systems.

Packaging/Quantity

The PIC18F46K80-I/P is typically packaged in tubes or trays, with quantities varying depending on the supplier and customer requirements.

Specifications

  • Microcontroller Family: PIC18
  • Core Size: 8-bit
  • Program Memory Size: 64 KB
  • RAM Size: 3.8 KB
  • Number of I/O Pins: 36
  • Operating Voltage Range: 2.0V to 5.5V
  • Maximum Clock Frequency: 64 MHz
  • Communication Interfaces: UART, SPI, I2C
  • Analog-to-Digital Converter (ADC): 10-bit, 13 channels

Detailed Pin Configuration

The PIC18F46K80-I/P has a total of 40 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. VSS - Ground
  3. RA0 - General-purpose I/O pin
  4. RA1 - General-purpose I/O pin
  5. RA2 - General-purpose I/O pin
  6. RA3 - General-purpose I/O pin
  7. RA4 - General-purpose I/O pin
  8. RA5 - General-purpose I/O pin
  9. MCLR - Master Clear input
  10. VDD - Power supply voltage
  11. VSS - Ground
  12. RB0 - General-purpose I/O pin
  13. RB1 - General-purpose I/O pin
  14. RB2 - General-purpose I/O pin
  15. RB3 - General-purpose I/O pin
  16. RB4 - General-purpose I/O pin
  17. RB5 - General-purpose I/O pin
  18. RB6 - General-purpose I/O pin
  19. RB7 - General-purpose I/O pin
  20. VDD - Power supply voltage
  21. VSS - Ground
  22. RC0 - General-purpose I/O pin
  23. RC1 - General-purpose I/O pin
  24. RC2 - General-purpose I/O pin
  25. RC3 - General-purpose I/O pin
  26. RC4 - General-purpose I/O pin
  27. RC5 - General-purpose I/O pin
  28. RC6 - General-purpose I/O pin
  29. RC7 - General-purpose I/O pin
  30. VDD - Power supply voltage
  31. VSS - Ground
  32. RD0 - General-purpose I/O pin
  33. RD1 - General-purpose I/O pin
  34. RD2 - General-purpose I/O pin
  35. RD3 - General-purpose I/O pin
  36. RD4 - General-purpose I/O pin
  37. RD5 - General-purpose I/O pin
  38. RD6 - General-purpose I/O pin
  39. RD7 - General-purpose I/O pin
  40. VSS - Ground

Functional Features

The PIC18F46K80-I/P offers a range of functional features that enhance its performance and versatility. Some notable features include:

  • Enhanced Capture/Compare/PWM (ECCP) module for advanced motor control applications
  • Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART) for serial communication
  • Master Synchronous Serial Port (MSSP) module supporting I2C and SPI protocols
  • Analog-to-Digital Converter (ADC) with multiple channels for precise analog measurements
  • Timers and counters for accurate timing and event management
  • Interrupt handling capabilities for real-time responsiveness

Advantages and Disadvantages

Advantages

  • High-performance 8-bit architecture enables efficient processing of data and instructions.
  • Flash program memory allows for easy reprogramming and flexibility in application development.
  • Low power consumption ensures energy efficiency and longer battery life.
  • Wide operating voltage range accommodates various power supply configurations.
  • Enhanced peripheral integration simplifies system design and reduces external component count.

Disadvantages

  • Limited program memory size may restrict the complexity of certain applications.
  • 8-bit architecture may not be suitable for computationally intensive tasks compared to higher bit architectures.
  • Limited number of I/O pins may pose constraints in projects requiring extensive interf

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací PIC18F46K80-I/P v technických řešeních

  1. What is the maximum operating frequency of PIC18F46K80-I/P?

    • The maximum operating frequency of PIC18F46K80-I/P is 64 MHz.

  2. What are the key features of PIC18F46K80-I/P?

    • PIC18F46K80-I/P features 64 KB Flash program memory, 3.8 KB RAM, 1.5 KB EEPROM, and 16-bit timers.

  3. Can PIC18F46K80-I/P be used for motor control applications?

    • Yes, PIC18F46K80-I/P can be used for motor control applications due to its integrated PWM modules and high-speed ADC.

  4. Does PIC18F46K80-I/P support communication protocols like SPI and I2C?

    • Yes, PIC18F46K80-I/P supports SPI, I2C, and UART communication protocols.

  5. What voltage range does PIC18F46K80-I/P operate at?

    • PIC18F46K80-I/P operates at a voltage range of 2.0V to 5.5V.

  6. Is PIC18F46K80-I/P suitable for battery-powered applications?

    • Yes, PIC18F46K80-I/P's low power consumption makes it suitable for battery-powered applications.

  7. Can PIC18F46K80-I/P be programmed using C language?

    • Yes, PIC18F46K80-I/P can be programmed using C language with the MPLAB XC8 compiler.

  8. What development tools are compatible with PIC18F46K80-I/P?

    • PIC18F46K80-I/P is compatible with MPLAB X IDE and MPLAB ICD 3 in-circuit debugger.

  9. Does PIC18F46K80-I/P have built-in security features?

    • Yes, PIC18F46K80-I/P offers code protection and data EEPROM/Flash memory write protection.

  10. What are the typical applications of PIC18F46K80-I/P?

    • Typical applications of PIC18F46K80-I/P include industrial control systems, consumer electronics, and automotive applications.