Microchip Technology
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
PIC18F23K20-E/SP
Zobrazit detail DataSheets

PIC18F23K20-E/SP

Product Overview

Category

The PIC18F23K20-E/SP belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems for controlling and processing data.

Characteristics

  • High-performance 8-bit architecture
  • Low power consumption
  • Enhanced flash memory technology
  • Integrated peripherals for versatile applications
  • Wide operating voltage range
  • Robust communication interfaces

Package

The PIC18F23K20-E/SP is available in a small outline package (SP) format.

Essence

The essence of this microcontroller lies in its ability to provide efficient and reliable control and processing capabilities for electronic devices and embedded systems.

Packaging/Quantity

The PIC18F23K20-E/SP is typically packaged in reels or tubes, with a quantity of 25 units per reel/tube.

Specifications

  • Microcontroller Family: PIC18
  • CPU Speed: Up to 64 MHz
  • Program Memory Size: 32 KB
  • RAM Size: 2 KB
  • Number of I/O Pins: 22
  • ADC Channels: 10-bit, 13 channels
  • Communication Interfaces: UART, SPI, I2C
  • Operating Voltage Range: 2.0V to 5.5V
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PIC18F23K20-E/SP has a total of 28 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. RA0 - General-purpose I/O pin
  3. RA1 - General-purpose I/O pin
  4. RA2 - General-purpose I/O pin
  5. RA3 - General-purpose I/O pin
  6. RA4 - General-purpose I/O pin
  7. RA5 - General-purpose I/O pin
  8. VSS - Ground
  9. OSC1/CLKIN - Oscillator input
  10. OSC2/CLKOUT - Oscillator output
  11. RC0 - General-purpose I/O pin
  12. RC1 - General-purpose I/O pin
  13. RC2 - General-purpose I/O pin
  14. RC3 - General-purpose I/O pin
  15. RC4 - General-purpose I/O pin
  16. RC5 - General-purpose I/O pin
  17. RC6/TX/CK - UART transmit pin or clock input
  18. RC7/RX/DT - UART receive pin or data input
  19. VUSB - USB power supply
  20. RB0/INT0 - External interrupt input
  21. RB1/INT1 - External interrupt input
  22. RB2/INT2 - External interrupt input
  23. RB3/CCP2 - Capture/Compare/PWM pin
  24. RB4/SDI/SDA - SPI/I2C data input
  25. RB5/SDO/SCL - SPI/I2C data output
  26. RB6/PGC - Programming/debugging clock
  27. RB7/PGD - Programming/debugging data
  28. VPP/MCLR - Programming voltage or Master Clear input

Functional Features

The PIC18F23K20-E/SP offers several functional features that enhance its performance and versatility:

  • Enhanced Flash program memory for easy code updates
  • Integrated analog-to-digital converter (ADC) for precise measurements
  • Multiple communication interfaces for seamless connectivity
  • Timers and PWM modules for accurate timing control
  • Interrupt capability for efficient event handling
  • Low-power modes to conserve energy
  • Built-in oscillator for reliable clock generation

Advantages and Disadvantages

Advantages

  • High-performance architecture for efficient data processing
  • Low power consumption for extended battery life
  • Wide operating voltage range for compatibility with various power sources
  • Integrated peripherals reduce the need for external components
  • Robust communication interfaces enable seamless connectivity

Disadvantages

  • Limited program memory size compared to some other microcontrollers
  • Relatively fewer I/O pins for complex applications
  • Higher cost compared to lower-end microcontrollers

Working Principles

The PIC18F23K20-E/SP operates based on the principles of a typical microcontroller. It executes instructions stored in its program memory, interacts with external devices through its I/O pins, and utilizes integrated peripherals to perform specific tasks. The microcontroller's central processing unit (CPU) coordinates these operations, ensuring proper control and data processing.

Detailed Application Field Plans

The PIC18F23K20-E/SP finds applications in various fields, including but not limited to:

  1. Industrial automation: Control systems, motor drives, and monitoring devices.
  2. Consumer electronics: Home appliances, gaming consoles, and audio/video equipment.
  3. Automotive: Engine control units, dashboard

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací PIC18F23K20-E/SP v technických řešeních

  1. What is the maximum operating frequency of PIC18F23K20-E/SP?
    - The maximum operating frequency of PIC18F23K20-E/SP is 64 MHz.

  2. How many I/O pins does PIC18F23K20-E/SP have?
    - PIC18F23K20-E/SP has 22 I/O pins.

  3. What are the key features of PIC18F23K20-E/SP?
    - Some key features of PIC18F23K20-E/SP include 16KB Flash program memory, 256 bytes of EEPROM data memory, and 256 bytes of SRAM.

  4. Can PIC18F23K20-E/SP be used for battery-powered applications?
    - Yes, PIC18F23K20-E/SP is suitable for battery-powered applications due to its low power consumption features.

  5. Is PIC18F23K20-E/SP compatible with SPI communication?
    - Yes, PIC18F23K20-E/SP supports SPI communication.

  6. What development tools are available for programming PIC18F23K20-E/SP?
    - Development tools such as MPLAB X IDE and PICkit 3 programmer/debugger can be used for programming PIC18F23K20-E/SP.

  7. Can PIC18F23K20-E/SP be used in industrial control systems?
    - Yes, PIC18F23K20-E/SP is suitable for use in industrial control systems due to its robust features and performance.

  8. What is the voltage range for operating PIC18F23K20-E/SP?
    - PIC18F23K20-E/SP operates within a voltage range of 2.0V to 5.5V.

  9. Does PIC18F23K20-E/SP have built-in analog-to-digital converters (ADC)?
    - Yes, PIC18F23K20-E/SP has 10-bit ADC modules for analog signal conversion.

  10. Are there any application notes or reference designs available for PIC18F23K20-E/SP?
    - Yes, Microchip provides application notes and reference designs for implementing PIC18F23K20-E/SP in various technical solutions.