Microchip Technology
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
PIC16LC558-04/P
Zobrazit detail DataSheets

PIC16LC558-04/P

Product Overview

Category

The PIC16LC558-04/P belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic applications that require embedded control and processing capabilities.

Characteristics

  • Low power consumption
  • High performance
  • Compact size
  • Versatile functionality

Package

The PIC16LC558-04/P is available in a compact package, which ensures easy integration into electronic circuits.

Essence

The essence of this microcontroller lies in its ability to provide efficient control and processing capabilities in a small form factor.

Packaging/Quantity

The PIC16LC558-04/P is typically packaged in reels or tubes, with a quantity of 1000 units per package.

Specifications

  • Architecture: 8-bit
  • CPU Speed: 4 MHz
  • Program Memory Size: 3.5 KB
  • RAM Size: 25 bytes
  • Number of I/O Pins: 12
  • Operating Voltage Range: 2.5V - 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Data Bus Width: 8 bits
  • EEPROM Size: 128 bytes
  • Timers: 1 x 8-bit, 1 x 16-bit
  • ADC Channels: 5
  • Communication Interfaces: SPI, I2C, USART

Detailed Pin Configuration

The PIC16LC558-04/P has a total of 18 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. RA0 - General-purpose I/O pin
  3. RA1 - General-purpose I/O pin
  4. RA2 - General-purpose I/O pin
  5. RA3 - General-purpose I/O pin
  6. RA4 - General-purpose I/O pin
  7. RA5 - General-purpose I/O pin
  8. VSS - Ground
  9. OSC1/CLKIN - Oscillator input
  10. OSC2/CLKOUT - Oscillator output
  11. RC0 - General-purpose I/O pin
  12. RC1 - General-purpose I/O pin
  13. RC2 - General-purpose I/O pin
  14. RC3 - General-purpose I/O pin
  15. RC4 - General-purpose I/O pin
  16. RC5 - General-purpose I/O pin
  17. MCLR/VPP - Master Clear/Voltage Programming Pin
  18. VDD - Power supply voltage

Functional Features

  • High-speed processing capabilities
  • On-chip peripherals for enhanced functionality
  • Low power consumption for energy-efficient operation
  • Flexible communication interfaces for seamless integration with other devices
  • Built-in timers and ADC channels for precise timing and analog signal acquisition

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into space-constrained designs
  • Versatile functionality enables a wide range of applications
  • Low power consumption prolongs battery life in portable devices
  • On-chip peripherals reduce the need for external components, saving cost and board space

Disadvantages

  • Limited program memory size may restrict the complexity of applications
  • Limited RAM size may impose constraints on data storage and manipulation
  • Lack of advanced features found in higher-end microcontrollers

Working Principles

The PIC16LC558-04/P operates based on an 8-bit architecture. It executes instructions stored in its program memory to perform various tasks. The microcontroller interacts with external devices through its I/O pins and communication interfaces. It utilizes timers for precise timing operations and ADC channels for analog signal acquisition. The microcontroller's working principles are governed by its internal circuitry and firmware.

Detailed Application Field Plans

The PIC16LC558-04/P finds applications in various fields, including but not limited to:

  1. Home automation systems
  2. Industrial control systems
  3. Automotive electronics
  4. Medical devices
  5. Consumer electronics

In home automation systems, the microcontroller can be used to control lighting, temperature, and security systems. In industrial control systems, it can be employed for process monitoring and control. In automotive electronics, it can facilitate engine management and vehicle diagnostics. In medical devices, it can enable precise measurements and data processing. In consumer electronics, it can power smart devices and appliances.

Detailed and Complete Alternative Models

  1. PIC16F877A: A popular alternative with higher program memory and RAM size.
  2. PIC18F4520: Offers enhanced features and performance compared to the PIC16LC558-04/P.
  3. ATmega328P: A microcontroller from a different manufacturer, offering similar functionality.
  4. STM32F103C8T6: Provides advanced features and higher processing capabilities.

These alternative models offer varying specifications and features, allowing designers to choose the most suitable microcontroller for their specific application requirements.

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací PIC16LC558-04/P v technických řešeních

  1. What is the operating voltage range of PIC16LC558-04/P?
    - The operating voltage range of PIC16LC558-04/P is 2.5V to 6.0V.

  2. What are the key features of PIC16LC558-04/P?
    - Some key features of PIC16LC558-04/P include 12-bit ADC, multiple communication interfaces, and low power consumption.

  3. Can PIC16LC558-04/P be used in battery-powered applications?
    - Yes, PIC16LC558-04/P is suitable for battery-powered applications due to its low power consumption.

  4. What programming language can be used to program PIC16LC558-04/P?
    - PIC16LC558-04/P can be programmed using assembly language or high-level languages such as C.

  5. Is PIC16LC558-04/P suitable for temperature sensing applications?
    - Yes, PIC16LC558-04/P can be used for temperature sensing applications with the help of its built-in ADC.

  6. What is the maximum clock frequency supported by PIC16LC558-04/P?
    - PIC16LC558-04/P supports a maximum clock frequency of 20 MHz.

  7. Can PIC16LC558-04/P be used in automotive electronics?
    - Yes, PIC16LC558-04/P is suitable for automotive electronics applications due to its wide operating voltage range.

  8. Does PIC16LC558-04/P have built-in EEPROM memory?
    - No, PIC16LC558-04/P does not have built-in EEPROM memory.

  9. What are the available package options for PIC16LC558-04/P?
    - PIC16LC558-04/P is available in PDIP, SOIC, and TSSOP package options.

  10. Can PIC16LC558-04/P be used in industrial control systems?
    - Yes, PIC16LC558-04/P can be used in industrial control systems due to its versatile communication interfaces and robust design.