Microchip Technology
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
PIC16F84A-04E/P
Zobrazit detail DataSheets

PIC16F84A-04E/P

Introduction

The PIC16F84A-04E/P is a microcontroller belonging to the PIC16F family, which is manufactured by Microchip Technology. This versatile microcontroller is widely used in various applications due to its unique features and capabilities.

Basic Information Overview

  • Category: Microcontroller
  • Use: Control and automation systems, embedded systems, consumer electronics
  • Characteristics: Low power consumption, high performance, versatile I/O capabilities
  • Package: 18-pin DIP (Dual Inline Package)
  • Essence: The PIC16F84A-04E/P is designed to provide a cost-effective solution for controlling and monitoring tasks in embedded systems.
  • Packaging/Quantity: Available in tape and reel packaging with varying quantities.

Specifications

  • Clock Speed: 4 MHz
  • Program Memory: 1.75 KB
  • RAM: 68 bytes
  • I/O Pins: 13
  • Timers: 1 x 8-bit, 1 x 16-bit
  • ADC Channels: 5
  • Communication Interfaces: UART, SPI, I2C

Detailed Pin Configuration

The PIC16F84A-04E/P features an 18-pin DIP package with the following pin configuration: 1. VDD - Power supply 2. RB0/INT - General-purpose I/O or external interrupt 3. RB1 - General-purpose I/O 4. RB2 - General-purpose I/O 5. RB3/PGM - General-purpose I/O or programming voltage 6. RB4/PGC - General-purpose I/O or in-circuit serial programming clock 7. RB5/PGD - General-purpose I/O or in-circuit serial programming data 8. VSS - Ground 9. OSC1/CLKIN - Crystal oscillator input 10. OSC2/CLKOUT - Crystal oscillator output 11. RC6/TX/CK - USART transmit/serial clock 12. RC7/RX/DT - USART receive/data 13. RA0 - General-purpose I/O 14. RA1 - General-purpose I/O 15. RA2 - General-purpose I/O 16. RA3 - General-purpose I/O 17. RA4/MCLR/VPP - Master clear/reset or programming voltage 18. RA5 - General-purpose I/O

Functional Features

  • Versatile I/O Capabilities: The microcontroller offers a wide range of general-purpose I/O pins, enabling flexible interfacing with external devices.
  • Integrated Timers: The built-in timers facilitate precise timing and control functions in various applications.
  • Analog-to-Digital Conversion: With multiple ADC channels, the PIC16F84A-04E/P can efficiently process analog signals.
  • Serial Communication Interfaces: The microcontroller supports popular communication protocols such as UART, SPI, and I2C, enhancing connectivity options.

Advantages and Disadvantages

Advantages

  • Low power consumption
  • Cost-effective solution for control and automation applications
  • Extensive I/O capabilities
  • Integrated peripherals simplify system design

Disadvantages

  • Limited program memory and RAM compared to newer microcontrollers
  • Lower clock speed may limit performance in some applications

Working Principles

The PIC16F84A-04E/P operates based on the Harvard architecture, featuring separate program and data memories. It executes instructions fetched from the program memory and interacts with external devices through its I/O pins and communication interfaces. The microcontroller's internal peripherals and timers enable it to perform various control and monitoring tasks efficiently.

Detailed Application Field Plans

The PIC16F84A-04E/P finds extensive use in the following application fields: - Embedded Systems: Controlling and monitoring functions in industrial automation and IoT devices - Consumer Electronics: Remote control systems, electronic gadgets, and appliances - Automotive Electronics: Simple control and monitoring tasks in automotive applications - Educational Projects: Learning and prototyping projects in educational institutions

Detailed and Complete Alternative Models

  • PIC16F627A: Similar features with enhanced program memory and I/O capabilities
  • PIC16F88: Higher performance with increased program memory and additional peripherals
  • PIC16F877A: Advanced microcontroller with expanded memory, enhanced peripherals, and communication interfaces

In conclusion, the PIC16F84A-04E/P serves as a reliable and cost-effective solution for various control and automation applications, offering a balance between performance and affordability.

Word count: 611

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací PIC16F84A-04E/P v technických řešeních

  1. What is the maximum clock frequency of PIC16F84A-04E/P?
    - The maximum clock frequency of PIC16F84A-04E/P is 4 MHz.

  2. How many I/O pins does PIC16F84A-04E/P have?
    - PIC16F84A-04E/P has a total of 13 I/O pins.

  3. What is the program memory size of PIC16F84A-04E/P?
    - The program memory size of PIC16F84A-04E/P is 1K x 14 (1,024 words).

  4. Can PIC16F84A-04E/P be used for analog applications?
    - Yes, PIC16F84A-04E/P has analog capabilities and can be used for analog applications.

  5. What are the communication interfaces supported by PIC16F84A-04E/P?
    - PIC16F84A-04E/P supports serial communication through its USART module.

  6. Is PIC16F84A-04E/P suitable for low-power applications?
    - Yes, PIC16F84A-04E/P is suitable for low-power applications due to its low power consumption.

  7. Does PIC16F84A-04E/P have built-in timers?
    - Yes, PIC16F84A-04E/P features an 8-bit timer/counter with prescaler.

  8. Can PIC16F84A-04E/P be programmed using C language?
    - Yes, PIC16F84A-04E/P can be programmed using C language with appropriate compilers.

  9. What are the available development tools for PIC16F84A-04E/P?
    - Development tools such as MPLAB X IDE and PICkit programmers can be used for PIC16F84A-04E/P.

  10. Is PIC16F84A-04E/P suitable for beginner-level projects?
    - Yes, PIC16F84A-04E/P is often used in beginner-level projects due to its simplicity and ease of use.