Viz Specifikace pro podrobnosti o produktu.
PIC16F726-I/MV
Product Overview
Category
The PIC16F726-I/MV belongs to the category of microcontrollers.
Use
This microcontroller is commonly used in various electronic applications that require embedded control and processing capabilities.
Characteristics
- Low power consumption
- High-performance RISC CPU
- Wide operating voltage range
- Integrated peripherals for enhanced functionality
- Ample program memory and data storage capacity
Package
The PIC16F726-I/MV is available in a compact and durable package, suitable for surface mount technology (SMT) assembly.
Essence
The essence of the PIC16F726-I/MV lies in its ability to provide efficient and reliable control and processing capabilities within a small form factor.
Packaging/Quantity
This microcontroller is typically packaged in reels or tubes, with quantities varying based on customer requirements.
Specifications
- Architecture: 8-bit
- CPU Speed: Up to 20 MHz
- Program Memory Size: 14 KB
- RAM Size: 368 bytes
- Number of I/O Pins: 28
- ADC Channels: 5
- Timers: 3
- Communication Interfaces: UART, SPI, I2C
Detailed Pin Configuration
The PIC16F726-I/MV features a total of 28 pins, each serving a specific purpose. The pin configuration is as follows:
- VDD - Power supply voltage
- RA0 - General-purpose I/O pin
- RA1 - General-purpose I/O pin
- RA2 - General-purpose I/O pin
- RA3 - General-purpose I/O pin
- RA4 - General-purpose I/O pin
- RA5 - General-purpose I/O pin
- MCLR - Master Clear input
- VSS - Ground
- RB0 - General-purpose I/O pin
- RB1 - General-purpose I/O pin
- RB2 - General-purpose I/O pin
- RB3 - General-purpose I/O pin
- RB4 - General-purpose I/O pin
- RB5 - General-purpose I/O pin
- RB6 - General-purpose I/O pin
- RB7 - General-purpose I/O pin
- VDD - Power supply voltage
- OSC1/CLKIN - Oscillator input
- OSC2/CLKOUT - Oscillator output
- RC0 - General-purpose I/O pin
- RC1 - General-purpose I/O pin
- RC2 - General-purpose I/O pin
- RC3 - General-purpose I/O pin
- RC4 - General-purpose I/O pin
- RC5 - General-purpose I/O pin
- RC6 - General-purpose I/O pin
- RC7 - General-purpose I/O pin
Functional Features
The PIC16F726-I/MV offers a range of functional features, including:
- High-speed processing capabilities
- On-chip peripherals for enhanced functionality
- Analog-to-digital conversion (ADC) for sensor interfacing
- Timers and counters for precise timing control
- Communication interfaces for data exchange with external devices
- Flexible I/O pins for versatile connectivity options
Advantages and Disadvantages
Advantages
- Low power consumption enables energy-efficient designs
- Compact form factor suitable for space-constrained applications
- Wide operating voltage range allows for compatibility with various power sources
- Ample program memory and data storage capacity for complex applications
Disadvantages
- Limited number of I/O pins may restrict the number of external devices that can be connected simultaneously
- Lack of advanced features found in higher-end microcontrollers
Working Principles
The PIC16F726-I/MV operates based on the principles of a RISC (Reduced Instruction Set Computer) architecture. It executes instructions stored in its program memory, performs calculations, and controls external devices based on the input received from sensors or user interfaces.
Detailed Application Field Plans
The PIC16F726-I/MV finds applications in various fields, including:
- Home automation systems
- Industrial control systems
- Automotive electronics
- Medical devices
- Consumer electronics
Detailed and Complete Alternative Models
- PIC16F727-I/MV
- PIC16F724-I/MV
- PIC16F723-I/MV
- PIC16F722-I/MV
- PIC16F721-I/MV
These alternative models offer similar functionality and can be considered as alternatives to the PIC16F726-I/MV based on specific project requirements.
In conclusion, the PIC16F726-I/MV is a versatile microcontroller that provides efficient control and processing capabilities for a wide range of electronic applications. Its low power consumption, compact form factor, and integrated peripherals make it an attractive choice for designers seeking reliable embedded solutions
Seznam 10 běžných otázek a odpovědí souvisejících s aplikací PIC16F726-I/MV v technických řešeních
What is the maximum operating frequency of PIC16F726-I/MV?
- The maximum operating frequency of PIC16F726-I/MV is 20 MHz.What are the key features of PIC16F726-I/MV?
- Some key features of PIC16F726-I/MV include 14-bit core, 8K words Flash program memory, and 368 bytes data EEPROM.Can PIC16F726-I/MV be used for motor control applications?
- Yes, PIC16F726-I/MV can be used for motor control applications due to its integrated PWM module and analog-to-digital converter.Is PIC16F726-I/MV suitable for battery-powered devices?
- Yes, PIC16F726-I/MV is suitable for battery-powered devices as it has low power consumption features and multiple sleep modes.What communication interfaces are supported by PIC16F726-I/MV?
- PIC16F726-I/MV supports SPI, I2C, and USART communication interfaces.Can PIC16F726-I/MV be used in automotive applications?
- Yes, PIC16F726-I/MV can be used in automotive applications due to its wide operating voltage range and robust design.What development tools are available for programming PIC16F726-I/MV?
- Development tools such as MPLAB X IDE and PICkit programmers are available for programming PIC16F726-I/MV.Does PIC16F726-I/MV have built-in security features?
- Yes, PIC16F726-I/MV has built-in security features such as code protection and data EEPROM write protection.What are the temperature specifications for PIC16F726-I/MV?
- The operating temperature range for PIC16F726-I/MV is -40°C to 125°C.Can PIC16F726-I/MV be used in industrial control systems?
- Yes, PIC16F726-I/MV can be used in industrial control systems due to its robustness and support for various communication protocols.