Microchip Technology
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
PIC16C662-04I/P
Zobrazit detail DataSheets

PIC16C662-04I/P

Product Overview

Category

The PIC16C662-04I/P belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems for controlling and processing data.

Characteristics

  • Low power consumption
  • High-performance RISC CPU
  • Wide operating voltage range
  • On-chip flash memory for program storage
  • Multiple communication interfaces
  • Analog-to-digital converter (ADC)
  • Timers and counters for precise timing operations

Package

The PIC16C662-04I/P is available in a 40-pin plastic dual inline package (PDIP).

Essence

The essence of this microcontroller lies in its ability to provide efficient control and processing capabilities in a compact and versatile package.

Packaging/Quantity

The PIC16C662-04I/P is typically packaged in reels or tubes, with a quantity of 100 units per package.

Specifications

  • Architecture: 8-bit
  • CPU Speed: 4 MHz
  • Program Memory Size: 3.5 KB
  • RAM Size: 128 bytes
  • Data EEPROM Size: 256 bytes
  • Number of I/O Pins: 33
  • Operating Voltage Range: 2.0V to 5.5V
  • Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The PIC16C662-04I/P has a total of 40 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. RA0 - General-purpose I/O pin
  3. RA1 - General-purpose I/O pin
  4. RA2 - General-purpose I/O pin
  5. RA3 - General-purpose I/O pin
  6. RA4 - General-purpose I/O pin
  7. RA5 - General-purpose I/O pin
  8. VSS - Ground
  9. OSC1/CLKIN - Oscillator input
  10. OSC2/CLKOUT - Oscillator output
  11. RC0 - General-purpose I/O pin
  12. RC1 - General-purpose I/O pin
  13. RC2 - General-purpose I/O pin
  14. RC3 - General-purpose I/O pin
  15. RC4 - General-purpose I/O pin
  16. RC5 - General-purpose I/O pin
  17. RC6/TX - UART transmit pin
  18. RC7/RX - UART receive pin
  19. RB0 - General-purpose I/O pin
  20. RB1 - General-purpose I/O pin
  21. RB2 - General-purpose I/O pin
  22. RB3 - General-purpose I/O pin
  23. RB4 - General-purpose I/O pin
  24. RB5 - General-purpose I/O pin
  25. RB6 - General-purpose I/O pin
  26. RB7 - General-purpose I/O pin
  27. RB8 - General-purpose I/O pin
  28. RB9 - General-purpose I/O pin
  29. RB10 - General-purpose I/O pin
  30. RB11 - General-purpose I/O pin
  31. RB12 - General-purpose I/O pin
  32. RB13 - General-purpose I/O pin
  33. RB14 - General-purpose I/O pin
  34. RB15 - General-purpose I/O pin
  35. MCLR/VPP - Master Clear/Voltage Programming Pin
  36. VCAP - External capacitor connection for voltage regulator
  37. VDDCORE - Core voltage supply
  38. AVDD - Analog power supply
  39. AVSS - Analog ground
  40. VSS - Ground

Functional Features

The PIC16C662-04I/P offers several functional features that enhance its performance and versatility:

  1. High-performance RISC CPU: The microcontroller is equipped with a powerful RISC (Reduced Instruction Set Computer) CPU, enabling efficient execution of instructions.
  2. Flash Memory: On-chip flash memory allows for easy program storage and modification.
  3. Communication Interfaces: The microcontroller supports multiple communication interfaces such as UART, SPI, and I2C, facilitating seamless integration with other devices.
  4. Analog-to-Digital Converter (ADC): The built-in ADC enables the microcontroller to convert analog signals into digital data for processing.
  5. Timers and Counters: The presence of timers and counters allows precise timing operations and event counting.

Advantages and Disadvantages

Advantages

  • Low power consumption makes it suitable for battery-powered applications.
  • Wide operating voltage range provides flexibility in various power supply scenarios.
  • Compact package size enables integration into space-constrained designs.
  • On-chip flash memory allows for easy program updates and modifications.
  • Multiple communication interfaces enhance connectivity options.

Disadvantages

  • Limited program memory size may restrict the complexity of applications.
  • Relatively low CPU speed may impact performance in

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací PIC16C662-04I/P v technických řešeních

  1. What is the operating voltage range of PIC16C662-04I/P?
    - The operating voltage range of PIC16C662-04I/P is 2.5V to 5.5V.

  2. What is the maximum clock frequency supported by PIC16C662-04I/P?
    - PIC16C662-04I/P supports a maximum clock frequency of 4 MHz.

  3. Can PIC16C662-04I/P be used for battery-powered applications?
    - Yes, PIC16C662-04I/P's low operating voltage range makes it suitable for battery-powered applications.

  4. What are the communication interfaces supported by PIC16C662-04I/P?
    - PIC16C662-04I/P supports USART and SPI communication interfaces.

  5. Is PIC16C662-04I/P suitable for motor control applications?
    - Yes, PIC16C662-04I/P can be used for simple motor control applications.

  6. What are the available memory options in PIC16C662-04I/P?
    - PIC16C662-04I/P has 3.5 KB of program memory and 128 bytes of RAM.

  7. Can PIC16C662-04I/P be used in temperature sensing applications?
    - Yes, PIC16C662-04I/P can be used in temperature sensing applications with external sensors.

  8. Does PIC16C662-04I/P have built-in analog-to-digital conversion (ADC) capability?
    - No, PIC16C662-04I/P does not have built-in ADC capability.

  9. What development tools are available for programming PIC16C662-04I/P?
    - Microchip's MPLAB IDE and PICkit programmers can be used for programming PIC16C662-04I/P.

  10. Is PIC16C662-04I/P suitable for low-power applications?
    - Yes, PIC16C662-04I/P's low operating voltage and power-saving features make it suitable for low-power applications.