Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
PIC16C558T-20I/SS

PIC16C558T-20I/SS

Product Overview

Category

The PIC16C558T-20I/SS belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems for controlling and processing data.

Characteristics

  • High-performance 8-bit RISC architecture
  • Flash-based program memory
  • Low power consumption
  • Wide operating voltage range
  • Integrated peripherals for enhanced functionality

Package

The PIC16C558T-20I/SS is available in a small outline package (SSOP) format, which allows for easy integration into compact designs.

Essence

The essence of this microcontroller lies in its ability to efficiently execute instructions and perform tasks with minimal power consumption.

Packaging/Quantity

The PIC16C558T-20I/SS is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Operating Voltage: 2.0V to 5.5V
  • Maximum Clock Frequency: 20 MHz
  • Program Memory Size: 3.5 KB
  • RAM Size: 128 bytes
  • Number of I/O Pins: 12
  • ADC Channels: 4
  • Timers: 1 x 8-bit, 1 x 16-bit
  • Communication Interfaces: SPI, I2C, USART

Detailed Pin Configuration

The PIC16C558T-20I/SS has a total of 20 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. RA0 - General-purpose I/O pin
  3. RA1 - General-purpose I/O pin
  4. RA2 - General-purpose I/O pin
  5. RA3 - General-purpose I/O pin
  6. RA4 - General-purpose I/O pin
  7. RA5 - General-purpose I/O pin
  8. MCLR/VPP - Master Clear input or programming voltage
  9. VSS - Ground
  10. OSC1/CLKIN - Oscillator input
  11. OSC2/CLKOUT - Oscillator output
  12. RC0 - General-purpose I/O pin
  13. RC1 - General-purpose I/O pin
  14. RC2 - General-purpose I/O pin
  15. RC3 - General-purpose I/O pin
  16. RC4 - General-purpose I/O pin
  17. RC5 - General-purpose I/O pin
  18. RC6/TX/CK - USART transmit pin or clock input
  19. RC7/RX/DT - USART receive pin or data transmit pin
  20. VDD - Power supply voltage

Functional Features

The PIC16C558T-20I/SS offers several functional features that enhance its performance and versatility:

  • Flash-based program memory allows for easy reprogramming of the microcontroller.
  • Integrated peripherals such as SPI, I2C, and USART enable seamless communication with other devices.
  • The 8-bit and 16-bit timers provide precise timing control for various applications.
  • The built-in ADC channels facilitate analog signal acquisition and processing.

Advantages and Disadvantages

Advantages

  • High-performance RISC architecture ensures efficient execution of instructions.
  • Low power consumption makes it suitable for battery-powered applications.
  • Wide operating voltage range allows for flexibility in different power supply scenarios.
  • Compact SSOP package enables space-saving designs.

Disadvantages

  • Limited program memory size may restrict the complexity of certain applications.
  • Relatively small number of I/O pins may limit the connectivity options for larger projects.

Working Principles

The PIC16C558T-20I/SS operates based on the principles of a typical microcontroller. It executes instructions stored in its program memory, interacts with peripherals and external devices through its I/O pins, and performs various tasks according to the programmed logic.

Detailed Application Field Plans

The PIC16C558T-20I/SS finds applications in a wide range of fields, including but not limited to:

  1. Home automation systems
  2. Industrial control systems
  3. Automotive electronics
  4. Medical devices
  5. Consumer electronics
  6. Internet of Things (IoT) devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the PIC16C558T-20I/SS include:

  1. PIC16F558 - A newer version with enhanced features and increased program memory.
  2. ATmega328P - A microcontroller from Atmel with comparable specifications.
  3. STM32F103C8T6 - An ARM-based microcontroller with higher processing power.

These alternative models can be considered based on specific project requirements and compatibility with existing designs.

Word count: 554 words

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací PIC16C558T-20I/SS v technických řešeních

  1. What is the operating voltage range of PIC16C558T-20I/SS?
    - The operating voltage range of PIC16C558T-20I/SS is 2.0V to 5.5V.

  2. What are the typical applications of PIC16C558T-20I/SS?
    - PIC16C558T-20I/SS is commonly used in industrial control systems, sensor interfaces, and battery management applications.

  3. What is the maximum clock frequency supported by PIC16C558T-20I/SS?
    - PIC16C558T-20I/SS supports a maximum clock frequency of 20 MHz.

  4. Can PIC16C558T-20I/SS be used for low-power applications?
    - Yes, PIC16C558T-20I/SS features low-power consumption, making it suitable for battery-powered devices.

  5. What communication interfaces are supported by PIC16C558T-20I/SS?
    - PIC16C558T-20I/SS supports USART, SPI, and I2C communication interfaces.

  6. Is PIC16C558T-20I/SS suitable for temperature sensing applications?
    - Yes, PIC16C558T-20I/SS can be used for temperature sensing with the appropriate external sensors.

  7. Can PIC16C558T-20I/SS be programmed in-circuit?
    - Yes, PIC16C558T-20I/SS supports in-circuit programming for easy firmware updates.

  8. What are the available package options for PIC16C558T-20I/SS?
    - PIC16C558T-20I/SS is available in a 20-pin SSOP package.

  9. Does PIC16C558T-20I/SS have built-in analog-to-digital converters (ADC)?
    - Yes, PIC16C558T-20I/SS features integrated ADC modules for analog signal processing.

  10. Can PIC16C558T-20I/SS operate in harsh environmental conditions?
    - Yes, PIC16C558T-20I/SS is designed to withstand extended temperature ranges and is suitable for harsh environments.