Microchip Technology
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
MIC5255-3.0BD5-TR
Zobrazit detail DataSheets

MIC5255-3.0BD5-TR

Product Overview

Category

MIC5255-3.0BD5-TR belongs to the category of voltage regulators.

Use

This product is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Small form factor
  • Low power consumption
  • High efficiency

Package

MIC5255-3.0BD5-TR comes in a compact package, suitable for surface mount technology (SMT) applications.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage output to ensure proper functioning of electronic devices.

Packaging/Quantity

MIC5255-3.0BD5-TR is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage: 3.0V
  • Output Current: Up to 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 45µA (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

MIC5255-3.0BD5-TR has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. BYP (Bypass Capacitor)
  5. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage for efficient voltage regulation.
  • Built-in thermal shutdown protection.
  • Short-circuit current limit for overcurrent protection.
  • Enable pin for easy on/off control.
  • Bypass capacitor pin for improved stability.

Advantages and Disadvantages

Advantages

  • Compact size allows for space-saving designs.
  • Wide input voltage range for versatile applications.
  • Low quiescent current minimizes power consumption.
  • Excellent line and load regulation for stable output voltage.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight decrease in efficiency.

Working Principles

MIC5255-3.0BD5-TR operates based on the principle of linear voltage regulation. It uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, regardless of input voltage variations.

Detailed Application Field Plans

MIC5255-3.0BD5-TR finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT (Internet of Things) devices - Wearable devices - Embedded systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to MIC5255-3.0BD5-TR are: - LM1117-3.3 - MCP1702-3002E/TO - LT1761ES5-3.3

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements and design constraints.

In conclusion, MIC5255-3.0BD5-TR is a voltage regulator with excellent characteristics, compact package, and wide application potential. Its efficient voltage regulation and low power consumption make it suitable for various electronic devices and systems.

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací MIC5255-3.0BD5-TR v technických řešeních

Sure! Here are 10 common questions and answers related to the application of MIC5255-3.0BD5-TR in technical solutions:

  1. Q: What is the MIC5255-3.0BD5-TR? A: The MIC5255-3.0BD5-TR is a voltage regulator IC (integrated circuit) that provides a fixed output voltage of 3.0V.

  2. Q: What is the input voltage range for the MIC5255-3.0BD5-TR? A: The input voltage range for the MIC5255-3.0BD5-TR is typically between 2.7V and 16V.

  3. Q: What is the maximum output current of the MIC5255-3.0BD5-TR? A: The MIC5255-3.0BD5-TR can provide a maximum output current of 150mA.

  4. Q: Can the MIC5255-3.0BD5-TR be used in battery-powered applications? A: Yes, the MIC5255-3.0BD5-TR is suitable for battery-powered applications due to its low quiescent current and wide input voltage range.

  5. Q: Does the MIC5255-3.0BD5-TR require any external components for operation? A: Yes, the MIC5255-3.0BD5-TR requires a few external components such as input and output capacitors for stability and filtering.

  6. Q: Is the MIC5255-3.0BD5-TR a linear or switching regulator? A: The MIC5255-3.0BD5-TR is a linear regulator, which means it regulates the output voltage by dissipating excess power as heat.

  7. Q: What is the dropout voltage of the MIC5255-3.0BD5-TR? A: The dropout voltage of the MIC5255-3.0BD5-TR is typically around 200mV at a 150mA load.

  8. Q: Can the MIC5255-3.0BD5-TR handle input voltage fluctuations? A: Yes, the MIC5255-3.0BD5-TR has built-in protection features to handle input voltage fluctuations, such as overvoltage and reverse voltage protection.

  9. Q: What is the operating temperature range for the MIC5255-3.0BD5-TR? A: The MIC5255-3.0BD5-TR can operate within a temperature range of -40°C to +125°C.

  10. Q: Are there any application notes or reference designs available for the MIC5255-3.0BD5-TR? A: Yes, the manufacturer provides application notes and reference designs that can help with the implementation of the MIC5255-3.0BD5-TR in various technical solutions.

Please note that these answers are general and may vary depending on the specific datasheet and manufacturer's documentation for the MIC5255-3.0BD5-TR.