Viz Specifikace pro podrobnosti o produktu.
MIC5232-2.8YD5-TR
Product Overview
Category
The MIC5232-2.8YD5-TR belongs to the category of voltage regulators.
Use
This product is commonly used in electronic circuits to regulate and stabilize voltage levels.
Characteristics
- Voltage regulation: The MIC5232-2.8YD5-TR provides a stable output voltage of 2.8V.
- Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
- Low quiescent current: The regulator consumes minimal current when in standby mode.
- Thermal shutdown protection: It includes built-in protection against excessive heat.
Package
The MIC5232-2.8YD5-TR is available in a small surface-mount package.
Essence
This voltage regulator ensures a reliable and steady power supply for various electronic devices.
Packaging/Quantity
The MIC5232-2.8YD5-TR is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
Specifications
- Input Voltage Range: 2.7V to 16V
- Output Voltage: 2.8V
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 120µA (typical)
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
The MIC5232-2.8YD5-TR has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- BYP: Bypass capacitor pin for improved stability
- EN: Enable pin for turning the regulator on/off
Functional Features
- Voltage Regulation: The MIC5232-2.8YD5-TR maintains a constant output voltage of 2.8V, regardless of input voltage fluctuations.
- Low Dropout Voltage: It can operate efficiently even when the input voltage is only slightly higher than the desired output voltage.
- Low Quiescent Current: The regulator consumes minimal current in standby mode, conserving power and extending battery life.
- Thermal Shutdown Protection: Built-in protection mechanism shuts down the regulator if it exceeds safe temperature limits.
Advantages and Disadvantages
Advantages
- Provides stable and regulated output voltage.
- Suitable for low-power applications.
- Compact surface-mount package.
- Offers thermal shutdown protection.
Disadvantages
- Limited to a fixed output voltage of 2.8V.
- Not suitable for high-power applications.
Working Principles
The MIC5232-2.8YD5-TR operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage of 2.8V. This ensures that the connected electronic devices receive a stable power supply, even when the input voltage varies.
Detailed Application Field Plans
The MIC5232-2.8YD5-TR finds applications in various electronic systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Embedded systems - IoT (Internet of Things) devices - Automotive electronics
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to the MIC5232-2.8YD5-TR include: - LM1117-2.8 - LT1763-2.8 - TPS78228
These alternatives provide different package options, voltage ranges, and additional features, allowing designers to choose the most suitable option for their specific requirements.
Word count: 443 words
Seznam 10 běžných otázek a odpovědí souvisejících s aplikací MIC5232-2.8YD5-TR v technických řešeních
Sure! Here are 10 common questions and answers related to the application of MIC5232-2.8YD5-TR in technical solutions:
Q: What is the MIC5232-2.8YD5-TR? A: The MIC5232-2.8YD5-TR is a voltage regulator IC (integrated circuit) that provides a fixed output voltage of 2.8V.
Q: What are the typical applications of MIC5232-2.8YD5-TR? A: It is commonly used in various electronic devices such as mobile phones, tablets, portable media players, and other battery-powered devices.
Q: What is the input voltage range for MIC5232-2.8YD5-TR? A: The input voltage range is typically between 2.7V and 16V.
Q: What is the maximum output current of MIC5232-2.8YD5-TR? A: The maximum output current is typically 150mA.
Q: Does MIC5232-2.8YD5-TR require any external components for operation? A: Yes, it requires a few external components such as capacitors for stability and noise filtering.
Q: Can MIC5232-2.8YD5-TR handle input voltage fluctuations? A: Yes, it has built-in protection features like overcurrent and thermal shutdown to handle input voltage fluctuations.
Q: Is MIC5232-2.8YD5-TR suitable for low-power applications? A: Yes, it is designed for low-power applications and offers high efficiency and low quiescent current.
Q: Can I use MIC5232-2.8YD5-TR in automotive applications? A: Yes, it is suitable for automotive applications as it can handle a wide input voltage range and has built-in protection features.
Q: What is the operating temperature range of MIC5232-2.8YD5-TR? A: The operating temperature range is typically between -40°C and +125°C.
Q: Is there any recommended PCB layout or application circuit for MIC5232-2.8YD5-TR? A: Yes, the datasheet of MIC5232-2.8YD5-TR provides a recommended PCB layout and application circuit for optimal performance.
Please note that the answers provided here are general and may vary depending on specific design considerations and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information and application-specific guidelines.