Microchip Technology
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
MCP19215-E/S8
Zobrazit detail DataSheets

MCP19215-E/S8

Product Overview

Category

The MCP19215-E/S8 belongs to the category of voltage mode synchronous buck controllers.

Use

It is primarily used for controlling and regulating the output voltage in power supply applications.

Characteristics

  • Voltage mode control
  • Synchronous buck controller
  • High efficiency
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection

Package

The MCP19215-E/S8 comes in an 8-pin SOIC package.

Essence

The essence of the MCP19215-E/S8 lies in its ability to efficiently regulate the output voltage in power supply applications, ensuring stable and reliable operation.

Packaging/Quantity

The MCP19215-E/S8 is typically packaged in reels containing 2500 units.

Specifications

  • Input Voltage Range: 4.5V to 32V
  • Output Voltage Range: 0.6V to VIN
  • Maximum Output Current: 2A
  • Switching Frequency: Up to 1MHz
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MCP19215-E/S8 has the following pin configuration:

  1. VDD - Power supply input
  2. GND - Ground reference
  3. FB - Feedback voltage input
  4. COMP - Compensation pin for loop stability
  5. CS - Current sense input
  6. EN - Enable pin for device operation
  7. SS/TR - Soft-start/Tracking pin
  8. SW - Switch node connection

Functional Features

  • Voltage mode control for precise regulation
  • Synchronous buck topology for high efficiency
  • Adjustable output voltage for flexibility
  • Overcurrent protection to prevent damage
  • Thermal shutdown protection to prevent overheating

Advantages and Disadvantages

Advantages

  • High efficiency operation
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent and thermal protection

Disadvantages

  • Limited maximum output current (2A)

Working Principles

The MCP19215-E/S8 operates on the principle of voltage mode control. It compares the feedback voltage with a reference voltage to generate an error signal, which is then used to adjust the duty cycle of the switching transistor. This regulates the output voltage according to the desired setpoint.

Detailed Application Field Plans

The MCP19215-E/S8 finds applications in various power supply systems, including but not limited to: - Industrial automation - Telecommunications equipment - Consumer electronics - Automotive electronics - LED lighting

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the MCP19215-E/S8 include: - MCP19111-E/MQ: Voltage mode synchronous buck controller with integrated MOSFET drivers - MCP19214-E/ML: Voltage mode synchronous buck controller with adjustable frequency and phase shift capability - MCP19314-E/ML: Voltage mode synchronous buck controller with integrated high-side and low-side MOSFET drivers

These alternative models provide options for different design requirements and specifications.

Word count: 346 words

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací MCP19215-E/S8 v technických řešeních

  1. What is the maximum input voltage for MCP19215-E/S8?
    - The maximum input voltage for MCP19215-E/S8 is 42V.

  2. What is the typical switching frequency range for MCP19215-E/S8?
    - The typical switching frequency range for MCP19215-E/S8 is 100kHz to 1MHz.

  3. Can MCP19215-E/S8 be used in automotive applications?
    - Yes, MCP19215-E/S8 is suitable for automotive applications.

  4. What is the maximum output current capability of MCP19215-E/S8?
    - The maximum output current capability of MCP19215-E/S8 is 10A.

  5. Does MCP19215-E/S8 have built-in overcurrent protection?
    - Yes, MCP19215-E/S8 features built-in overcurrent protection.

  6. Is there a minimum operating voltage for MCP19215-E/S8?
    - The minimum operating voltage for MCP19215-E/S8 is 4.5V.

  7. Can MCP19215-E/S8 be used in flyback converter designs?
    - Yes, MCP19215-E/S8 can be used in flyback converter designs.

  8. What type of control loop does MCP19215-E/S8 use?
    - MCP19215-E/S8 uses voltage mode control loop.

  9. Is there a specific application note available for using MCP19215-E/S8 in LED driver designs?
    - Yes, there is an application note available for using MCP19215-E/S8 in LED driver designs.

  10. What is the thermal resistance of MCP19215-E/S8?
    - The thermal resistance of MCP19215-E/S8 is 40°C/W.