DSPIC33EP32MC504T-E/PT

Product Overview

Category: Microcontroller
Use: Embedded systems, control applications
Characteristics: High-performance, low-power consumption
Package: TQFP-44
Essence: Digital Signal Controller (DSC)
Packaging/Quantity: Tray, 160 pieces per tray

Specifications

Core: dsPIC33E
CPU Speed: 60 MIPS
Flash Memory: 32 KB
RAM: 4 KB
Operating Voltage Range: 2.5V to 3.6V
Temperature Range: -40°C to +85°C
Number of I/O Pins: 35
Analog-to-Digital Converter (ADC): 10-bit, 16 channels
Pulse Width Modulation (PWM): 4 channels
Serial Communication: UART, SPI, I2C
Timers: 5 x 16-bit, 1 x 32-bit

Detailed Pin Configuration

The DSPIC33EP32MC504T-E/PT microcontroller has a total of 44 pins. The pin configuration is as follows:

Pin 1: VDD
Pin 2: VSS
Pin 3: OSC1/CLKI
Pin 4: OSC2/CLKO
Pin 5: AN0/RB0
Pin 6: AN1/RB1
Pin 7: AN2/RB2
Pin 8: AN3/RB3
Pin 9: AN4/RB4
Pin 10: AN5/RB5
Pin 11: AN6/RB6
Pin 12: AN7/RB7
Pin 13: RB8
Pin 14: RB9
Pin 15: RB10
Pin 16: RB11
Pin 17: RB12
Pin 18: RB13
Pin 19: RB14
Pin 20: RB15
Pin 21: VCAP
Pin 22: VSS
Pin 23: VDD
Pin 24: REFO/RF0
Pin 25: RF1
Pin 26: RF2
Pin 27: RF3
Pin 28: RF4
Pin 29: RF5
Pin 30: RF6
Pin 31: RF7
Pin 32: RF8
Pin 33: RF9
Pin 34: RF10
Pin 35: RF11
Pin 36: RF12
Pin 37: RF13
Pin 38: RF14
Pin 39: RF15
Pin 40: VSS
Pin 41: VDD
Pin 42: MCLR/VPP
Pin 43: PGD
Pin 44: PGC

Functional Features

High-performance digital signal processing capabilities
Efficient control algorithms for real-time applications
Low-power consumption for extended battery life
Enhanced connectivity options with UART, SPI, and I2C interfaces
Precise analog-to-digital conversion with a 10-bit ADC
Flexible pulse width modulation for precise control of motors and actuators
Multiple timers for accurate timing and event management

Advantages and Disadvantages

Advantages: - High-performance processing capabilities - Low-power consumption for energy-efficient designs - Versatile connectivity options - Precise analog-to-digital conversion - Flexible pulse width modulation

Disadvantages: - Limited flash memory and RAM capacity - Limited number of I/O pins

Working Principles

The DSPIC33EP32MC504T-E/PT microcontroller is based on the dsPIC33E core, which combines a high-performance digital signal processor (DSP) with a microcontroller (MCU). It utilizes advanced control algorithms to efficiently process and manipulate digital signals in real-time applications. The microcontroller operates at a CPU speed of 60 MIPS and can be programmed using various development tools and programming languages.

Detailed Application Field Plans

The DSPIC33EP32MC504T-E/PT microcontroller is suitable for a wide range of applications, including but not limited to: - Motor control systems - Power management systems - Industrial automation - Robotics - Home automation - Automotive electronics - Medical devices

Detailed and Complete Alternative Models

DSPIC33EP32MC504T-I/PT: Similar specifications and pin configuration, but available in an industrial temperature range.
DSPIC33EP32MC504T-H/PT: Higher operating voltage range (3.0V to 3.6V) and extended temperature range (-

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací DSPIC33EP32MC504T-E/PT v technických řešeních

What is the maximum operating frequency of DSPIC33EP32MC504T-E/PT?
- The maximum operating frequency of DSPIC33EP32MC504T-E/PT is 70 MHz.
What are the key features of DSPIC33EP32MC504T-E/PT?
- DSPIC33EP32MC504T-E/PT features high performance, integrated peripherals, and a wide operating voltage range.
Can DSPIC33EP32MC504T-E/PT be used for motor control applications?
- Yes, DSPIC33EP32MC504T-E/PT is suitable for motor control applications due to its advanced PWM modules and motor control peripherals.
What communication interfaces are supported by DSPIC33EP32MC504T-E/PT?
- DSPIC33EP32MC504T-E/PT supports various communication interfaces including UART, SPI, I2C, and CAN.
Is DSPIC33EP32MC504T-E/PT suitable for power supply applications?
- Yes, DSPIC33EP32MC504T-E/PT is well-suited for power supply applications with its high-speed ADC and analog peripherals.
What development tools are available for programming DSPIC33EP32MC504T-E/PT?
- Development tools such as MPLAB X IDE and MPLAB Code Configurator can be used for programming and configuring DSPIC33EP32MC504T-E/PT.
Does DSPIC33EP32MC504T-E/PT support digital signal processing algorithms?
- Yes, DSPIC33EP32MC504T-E/PT is capable of executing digital signal processing algorithms efficiently.
What are the recommended operating conditions for DSPIC33EP32MC504T-E/PT?
- The recommended operating voltage range for DSPIC33EP32MC504T-E/PT is 2.25V to 3.6V.
Can DSPIC33EP32MC504T-E/PT be used in industrial control systems?
- Yes, DSPIC33EP32MC504T-E/PT is suitable for industrial control systems due to its robust features and peripherals.
Are there any application notes or reference designs available for DSPIC33EP32MC504T-E/PT?
- Yes, Microchip provides application notes and reference designs to assist in implementing DSPIC33EP32MC504T-E/PT in various technical solutions.