Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
AT49SV163D-80TU

AT49SV163D-80TU

Product Overview

Category

AT49SV163D-80TU belongs to the category of non-volatile memory devices.

Use

This product is primarily used for data storage in various electronic devices such as computers, smartphones, and embedded systems.

Characteristics

  • Non-volatile: The AT49SV163D-80TU retains stored data even when power is removed.
  • High capacity: It offers a storage capacity of 16 megabits (2 megabytes).
  • Fast access time: The device provides quick access to stored data with an access time of 80 nanoseconds.
  • Low power consumption: It operates at low power levels, making it suitable for battery-powered devices.
  • Wide operating voltage range: The AT49SV163D-80TU can function within a voltage range of 2.7V to 3.6V.

Package

The AT49SV163D-80TU is available in a small form factor package, commonly known as Thin Small Outline Package (TSOP). This package ensures easy integration into various circuit boards.

Essence

The essence of AT49SV163D-80TU lies in its ability to provide reliable and high-capacity non-volatile memory storage for electronic devices.

Packaging/Quantity

The AT49SV163D-80TU is typically packaged in reels or trays, containing a specific quantity of devices per package. The exact packaging and quantity may vary depending on the manufacturer's specifications.

Specifications

  • Storage Capacity: 16 megabits (2 megabytes)
  • Access Time: 80 nanoseconds
  • Operating Voltage Range: 2.7V to 3.6V
  • Package Type: Thin Small Outline Package (TSOP)

Detailed Pin Configuration

The AT49SV163D-80TU has a total of 48 pins, each serving a specific purpose in the device's operation. The detailed pin configuration is as follows:

  1. VCC: Power supply voltage
  2. A0-A18: Address inputs
  3. CE#: Chip enable input
  4. OE#: Output enable input
  5. WE#: Write enable input
  6. I/O0-I/O7: Data input/output lines
  7. RESET#: Reset input
  8. WP#: Write protect input
  9. RY/BY#: Ready/Busy output
  10. NC: No connection (reserved)

(Note: The above list provides a brief overview of the pin configuration. For a complete and detailed pinout diagram, refer to the product datasheet.)

Functional Features

  • High-speed read and write operations
  • Sector erase and byte programming capabilities
  • Automatic sleep mode for power-saving
  • Hardware and software protection mechanisms
  • Reliable data retention and endurance

Advantages and Disadvantages

Advantages

  • Non-volatile memory ensures data retention even during power loss.
  • High storage capacity allows for storing large amounts of data.
  • Fast access time enables quick retrieval of stored information.
  • Low power consumption makes it suitable for battery-powered devices.
  • Wide operating voltage range enhances compatibility with various systems.

Disadvantages

  • Limited rewrite cycles compared to other types of memory.
  • Relatively higher cost per unit compared to volatile memory options.
  • Requires additional circuitry for interfacing with the host system.

Working Principles

The AT49SV163D-80TU utilizes flash memory technology to store and retrieve data. It employs a combination of floating-gate transistors and charge storage mechanisms to retain information even when power is removed. The device uses address inputs to select specific memory locations and control signals to perform read, write, and erase operations.

Detailed Application Field Plans

The AT49SV163D-80TU finds applications in various electronic devices and systems, including but not limited to: - Personal computers - Laptops and notebooks - Smartphones and tablets - Digital cameras - Automotive electronics - Industrial control systems - Medical equipment - Communication devices

Detailed and Complete Alternative Models

  1. AT25SF161: Similar non-volatile memory device with 16 megabits capacity, SPI interface, and smaller package size.
  2. MX25L1606E: Flash memory chip offering 16 megabits storage, low power consumption, and extended temperature range.
  3. S25FL116K: Non-volatile memory IC with 16 megabits capacity, fast access time, and advanced security features.

(Note: The above list provides a few alternative models for reference. There are several other options available in the market with similar specifications and functionality.)

In conclusion, the AT49SV163D-80TU is a high-capacity non-volatile memory device that offers fast access times, low power consumption, and wide compatibility. It finds applications in various electronic devices and systems, providing reliable data storage solutions.

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací AT49SV163D-80TU v technických řešeních

Sure! Here are 10 common questions and answers related to the application of AT49SV163D-80TU in technical solutions:

  1. Q: What is the AT49SV163D-80TU? A: The AT49SV163D-80TU is a specific model of flash memory chip manufactured by Atmel.

  2. Q: What is the storage capacity of the AT49SV163D-80TU? A: The AT49SV163D-80TU has a storage capacity of 16 megabits (2 megabytes).

  3. Q: What is the operating voltage range for this chip? A: The AT49SV163D-80TU operates within a voltage range of 2.7V to 3.6V.

  4. Q: What is the maximum clock frequency supported by this chip? A: The AT49SV163D-80TU supports a maximum clock frequency of 80 MHz.

  5. Q: Can this chip be used in automotive applications? A: Yes, the AT49SV163D-80TU is suitable for automotive applications as it meets the necessary requirements.

  6. Q: Does this chip support multiple programming modes? A: Yes, the AT49SV163D-80TU supports both byte and page programming modes.

  7. Q: Is this chip compatible with SPI (Serial Peripheral Interface)? A: Yes, the AT49SV163D-80TU is designed to work with SPI for easy integration into various systems.

  8. Q: What is the typical endurance of this chip? A: The AT49SV163D-80TU has a typical endurance of 100,000 program/erase cycles.

  9. Q: Can this chip operate in extended temperature ranges? A: Yes, the AT49SV163D-80TU is designed to operate in extended temperature ranges from -40°C to +85°C.

  10. Q: What are some typical applications for this chip? A: The AT49SV163D-80TU can be used in various applications such as automotive systems, industrial control, consumer electronics, and more.

Please note that these answers are general and may vary depending on specific requirements and use cases.