Viz Specifikace pro podrobnosti o produktu.
AT49F512-70TI
Product Overview
Category
AT49F512-70TI belongs to the category of non-volatile memory devices.
Use
This product is primarily used for storing and retrieving data in electronic systems.
Characteristics
- Non-volatile: The AT49F512-70TI retains stored data even when power is removed.
- High capacity: It has a storage capacity of 512 kilobits (64 kilobytes).
- Fast access time: The device offers a fast access time of 70 nanoseconds.
- Low power consumption: It operates on low power, making it suitable for battery-powered devices.
Package
The AT49F512-70TI is available in a Thin Small Outline Package (TSOP) format.
Essence
The essence of this product lies in its ability to provide reliable and non-volatile storage for electronic systems.
Packaging/Quantity
The AT49F512-70TI is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.
Specifications
- Memory Type: Flash
- Organization: 64K x 8 bits
- Supply Voltage: 2.7V - 3.6V
- Operating Temperature Range: -40°C to +85°C
- Data Retention: 20 years
- Erase/Write Cycle Endurance: 10,000 cycles
Detailed Pin Configuration
The AT49F512-70TI has a total of 32 pins. The pin configuration is as follows:
- A0
- A1
- A2
- A3
- A4
- A5
- A6
- A7
- VCC
- OE#
- CE#
- WE#
- BYTE#
- NC
- DQ0
- DQ1
- DQ2
- DQ3
- DQ4
- DQ5
- DQ6
- DQ7
- VSS
- RP#
- RY/BY#
- NC
- NC
- NC
- NC
- NC
- NC
- NC
Functional Features
- Easy integration: The AT49F512-70TI can be easily integrated into various electronic systems.
- High-speed operation: It offers fast read and write operations, enabling efficient data access.
- Versatile interface: The device supports a standard parallel interface for easy connectivity.
Advantages and Disadvantages
Advantages
- Non-volatile storage ensures data retention even during power loss.
- High capacity allows for storing large amounts of data.
- Fast access time enables quick retrieval of information.
- Low power consumption makes it suitable for battery-powered devices.
Disadvantages
- Limited erase/write cycle endurance compared to some other memory technologies.
- Relatively higher cost per bit compared to certain alternative memory options.
Working Principles
The AT49F512-70TI utilizes flash memory technology to store data. It employs a combination of floating-gate transistors and charge storage mechanisms to retain information even when power is removed. The device uses a series of electrical signals to read from or write to specific memory locations.
Detailed Application Field Plans
The AT49F512-70TI finds applications in various electronic systems, including but not limited to: - Embedded systems - Consumer electronics - Automotive electronics - Industrial control systems - Communication devices
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to the AT49F512-70TI include: - AT49BV512-70TI - AT45DB512C-70TI - AM29F512G-70TI - S25FL512SAGMFI011
These models provide comparable features and can be considered as alternatives based on specific requirements.
Word count: 474 words
Seznam 10 běžných otázek a odpovědí souvisejících s aplikací AT49F512-70TI v technických řešeních
Sure! Here are 10 common questions and answers related to the application of AT49F512-70TI in technical solutions:
Q: What is the AT49F512-70TI? A: The AT49F512-70TI is a 512K (64K x 8) CMOS flash memory chip manufactured by Atmel.
Q: What is the operating voltage range for the AT49F512-70TI? A: The AT49F512-70TI operates within a voltage range of 4.5V to 5.5V.
Q: What is the maximum clock frequency supported by the AT49F512-70TI? A: The AT49F512-70TI supports a maximum clock frequency of 70 MHz.
Q: Can the AT49F512-70TI be used as a boot device in embedded systems? A: Yes, the AT49F512-70TI can be used as a boot device due to its fast access times and non-volatile storage capabilities.
Q: What is the typical endurance of the AT49F512-70TI? A: The AT49F512-70TI has a typical endurance of 100,000 program/erase cycles.
Q: Does the AT49F512-70TI support in-system programming? A: Yes, the AT49F512-70TI supports in-system programming, allowing for easy firmware updates.
Q: What is the sector architecture of the AT49F512-70TI? A: The AT49F512-70TI is organized into 32 uniform sectors of 4K bytes each.
Q: Can the AT49F512-70TI operate in harsh environments? A: Yes, the AT49F512-70TI is designed to operate in industrial temperature ranges (-40°C to +85°C) and is suitable for harsh environments.
Q: What is the typical access time of the AT49F512-70TI? A: The AT49F512-70TI has a typical access time of 70 ns, allowing for fast read and write operations.
Q: Is the AT49F512-70TI compatible with standard microcontrollers? A: Yes, the AT49F512-70TI is compatible with most standard microcontrollers that support parallel flash memory interfaces.
Please note that these answers are based on general knowledge and may vary depending on specific application requirements.