Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
AT49BV002AN-70TU

AT49BV002AN-70TU

Product Overview

Category

AT49BV002AN-70TU belongs to the category of non-volatile memory devices.

Use

This product is primarily used for data storage in various electronic devices such as microcontrollers, embedded systems, and consumer electronics.

Characteristics

  • Non-volatile: The AT49BV002AN-70TU retains stored data even when power is disconnected.
  • High capacity: This device has a storage capacity of 2 megabits (256 kilobytes).
  • Fast access time: It offers a fast access time of 70 nanoseconds.
  • Low power consumption: The AT49BV002AN-70TU operates on low power, making it suitable for battery-powered devices.

Package

The AT49BV002AN-70TU is available in a surface-mount TSOP package.

Essence

The essence of this product lies in its ability to provide reliable and non-volatile storage for electronic devices, ensuring data integrity even during power interruptions.

Packaging/Quantity

The AT49BV002AN-70TU is typically packaged in reels, with each reel containing a specific quantity of devices. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Memory Type: Flash
  • Organization: 256K x 8 bits
  • Supply Voltage: 2.7V - 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Interface: Parallel
  • Access Time: 70 ns
  • Erase/Write Cycle Endurance: 10,000 cycles

Detailed Pin Configuration

The AT49BV002AN-70TU features a total of 32 pins, which are assigned specific functions. The pin configuration is as follows:

  1. A0 - Address Input
  2. A1 - Address Input
  3. A2 - Address Input
  4. A3 - Address Input
  5. A4 - Address Input
  6. A5 - Address Input
  7. A6 - Address Input
  8. A7 - Address Input
  9. A8 - Address Input
  10. A9 - Address Input
  11. A10 - Address Input
  12. A11 - Address Input
  13. A12 - Address Input
  14. A13 - Address Input
  15. A14 - Address Input
  16. A15 - Address Input
  17. CE - Chip Enable Input
  18. OE - Output Enable Input
  19. WE - Write Enable Input
  20. BYTE - Byte/Word Organization Input
  21. VCC - Power Supply
  22. DQ0 - Data Input/Output
  23. DQ1 - Data Input/Output
  24. DQ2 - Data Input/Output
  25. DQ3 - Data Input/Output
  26. DQ4 - Data Input/Output
  27. DQ5 - Data Input/Output
  28. DQ6 - Data Input/Output
  29. DQ7 - Data Input/Output
  30. RY/BY# - Ready/Busy Output
  31. RP# - Reset/Power-Down Input
  32. GND - Ground

Functional Features

The AT49BV002AN-70TU offers the following functional features:

  • Random access: Allows for reading and writing data at any memory location.
  • Sector erase: Supports erasing specific sectors of memory, enabling efficient use of storage space.
  • Programming voltage: The device operates with a single power supply voltage, simplifying the design and integration process.
  • Hardware data protection: Provides write protection to prevent accidental modification or deletion of stored data.

Advantages and Disadvantages

Advantages

  • Non-volatile storage ensures data integrity during power interruptions.
  • High storage capacity for various applications.
  • Fast access time allows for quick data retrieval.
  • Low power consumption extends battery life in portable devices.

Disadvantages

  • Limited erase/write cycle endurance compared to other memory technologies.
  • Relatively higher cost per bit compared to some alternative memory options.

Working Principles

The AT49BV002AN-70TU utilizes flash memory technology to store and retrieve data. It employs a combination of floating-gate transistors and charge storage mechanisms to retain information even when power is disconnected. The device uses an address bus, data bus, and control signals to enable read and write operations.

Detailed Application Field Plans

The AT49BV002AN-70TU finds application in various fields, including:

  1. Microcontrollers: Used for program storage in microcontroller-based systems.
  2. Embedded Systems: Provides non-volatile storage for firmware and configuration data in embedded systems.
  3. Consumer Electronics: Used in devices such as digital cameras, set-top boxes, and gaming consoles for data storage.

Detailed and Complete Alternative Models

  1. AT45DB161E: A similar flash memory device with

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací AT49BV002AN-70TU v technických řešeních

Sure! Here are 10 common questions and answers related to the application of AT49BV002AN-70TU in technical solutions:

  1. Q: What is the AT49BV002AN-70TU? A: The AT49BV002AN-70TU is a 2-megabit (256K x 8) Flash memory device manufactured by Atmel.

  2. Q: What are the key features of the AT49BV002AN-70TU? A: Some key features include a 70ns access time, low power consumption, sector erase capability, and compatibility with various microcontrollers.

  3. Q: How can I interface the AT49BV002AN-70TU with a microcontroller? A: The AT49BV002AN-70TU uses a standard parallel interface, making it compatible with most microcontrollers. You can connect it using address, data, and control lines.

  4. Q: What voltage levels does the AT49BV002AN-70TU support? A: The AT49BV002AN-70TU supports a single power supply voltage range of 2.7V to 3.6V.

  5. Q: Can I use the AT49BV002AN-70TU in battery-powered devices? A: Yes, the AT49BV002AN-70TU has low power consumption, making it suitable for battery-powered applications.

  6. Q: Does the AT49BV002AN-70TU support sector erase? A: Yes, the AT49BV002AN-70TU supports sector erase, allowing you to erase specific sections of the memory instead of the entire chip.

  7. Q: What is the maximum operating frequency of the AT49BV002AN-70TU? A: The AT49BV002AN-70TU can operate at a maximum frequency of 14 MHz.

  8. Q: Can I use the AT49BV002AN-70TU as a storage device for firmware or data? A: Yes, the AT49BV002AN-70TU is commonly used as a storage device for firmware, configuration data, or other non-volatile data in embedded systems.

  9. Q: Is the AT49BV002AN-70TU compatible with industry-standard programming tools? A: Yes, the AT49BV002AN-70TU can be programmed using industry-standard programming tools and techniques.

  10. Q: Are there any specific precautions to consider when using the AT49BV002AN-70TU? A: It is important to follow the recommended operating conditions, such as voltage levels and temperature ranges, provided in the datasheet to ensure proper functionality and reliability of the device.