Microchip Technology
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
AT29C256-15TC
Zobrazit detail DataSheets

AT29C256-15TC

Product Overview

Category

AT29C256-15TC belongs to the category of non-volatile memory devices.

Use

It is primarily used for storing and retrieving digital information in electronic systems.

Characteristics

  • Non-volatile: Retains data even when power is turned off.
  • High storage capacity: 256 kilobits (32 kilobytes).
  • Fast access time: Operates at a speed of 150 nanoseconds.
  • Low power consumption: Designed to minimize energy usage.
  • Reliable: Offers high endurance and data retention.

Package

AT29C256-15TC comes in a standard Thin Small Outline Package (TSOP) with 28 pins.

Essence

The essence of AT29C256-15TC lies in its ability to provide reliable and non-volatile storage for electronic systems.

Packaging/Quantity

This product is typically packaged in reels or tubes, with each containing a specific quantity of AT29C256-15TC chips.

Specifications

  • Memory Type: Electrically Erasable Programmable Read-Only Memory (EEPROM)
  • Organization: 32K x 8 bits
  • Supply Voltage: 2.7V - 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Data Retention: 10 years
  • Endurance: 100,000 write cycles

Detailed Pin Configuration

  1. A16
  2. A14
  3. A12
  4. A7
  5. A6
  6. A5
  7. A4
  8. A3
  9. A2
  10. A1
  11. A0
  12. VCC
  13. OE#
  14. CE#
  15. WE#
  16. I/O0
  17. I/O1
  18. I/O2
  19. I/O3
  20. I/O4
  21. I/O5
  22. I/O6
  23. I/O7
  24. GND
  25. NC
  26. NC
  27. NC
  28. NC

Functional Features

  • Easy to interface with microcontrollers and other digital systems.
  • Supports both read and write operations.
  • Provides sector erase capability for efficient memory management.
  • Offers hardware and software data protection mechanisms.
  • Low power consumption during standby mode.

Advantages and Disadvantages

Advantages

  • Non-volatile nature ensures data retention even in the absence of power.
  • High storage capacity allows for storing a significant amount of information.
  • Fast access time enables quick retrieval of data.
  • Low power consumption contributes to energy efficiency.
  • Reliable performance ensures long-term usability.

Disadvantages

  • Limited endurance compared to some other memory technologies.
  • Relatively higher cost per bit compared to certain alternatives.
  • Requires specific programming and erasing procedures.

Working Principles

AT29C256-15TC operates based on the principles of EEPROM technology. It utilizes electrically controlled gates to store and retrieve digital data. The memory cells are organized into a grid, with each cell capable of holding one bit of information. By applying appropriate voltage levels to the control pins, data can be written, read, or erased from the memory.

Detailed Application Field Plans

AT29C256-15TC finds applications in various electronic systems, including but not limited to: 1. Embedded systems 2. Automotive electronics 3. Industrial control systems 4. Consumer electronics 5. Communication devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to AT29C256-15TC include: 1. AT28C256-15PC 2. 27C256-15JL 3. M27C256B-15F1 4. W27C256-45Z

These models provide comparable storage capacity, access time, and functionality to AT29C256-15TC.

In conclusion, AT29C256-15TC is a non-volatile memory device that offers high storage capacity, fast access time, and low power consumption. It finds applications in various electronic systems and has several alternative models available in the market.

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací AT29C256-15TC v technických řešeních

Sure! Here are 10 common questions and answers related to the application of AT29C256-15TC in technical solutions:

  1. Q: What is the AT29C256-15TC? A: The AT29C256-15TC is a 32K x 8 low-power CMOS flash memory chip with a maximum access time of 150 ns.

  2. Q: What are the typical applications of AT29C256-15TC? A: It is commonly used in embedded systems, microcontrollers, automotive electronics, industrial control systems, and other applications that require non-volatile memory storage.

  3. Q: What is the operating voltage range for AT29C256-15TC? A: The operating voltage range is typically between 4.5V and 5.5V.

  4. Q: How much data can be stored in AT29C256-15TC? A: The AT29C256-15TC has a capacity of 256 kilobits or 32 kilobytes.

  5. Q: What is the maximum access time of AT29C256-15TC? A: The maximum access time is 150 nanoseconds, which means it takes a maximum of 150 ns to read or write data from/to the memory.

  6. Q: Can AT29C256-15TC be reprogrammed? A: Yes, it supports in-system programming, allowing it to be reprogrammed while still connected to the system.

  7. Q: Does AT29C256-15TC have any security features? A: No, it does not have built-in security features like write protection or encryption.

  8. Q: What is the temperature range for AT29C256-15TC? A: The operating temperature range is typically between -40°C and +85°C.

  9. Q: Can AT29C256-15TC be used as a boot memory? A: Yes, it can be used as a boot memory in systems where the firmware needs to be stored and executed upon power-up.

  10. Q: Are there any specific precautions to take when using AT29C256-15TC? A: It is important to follow the manufacturer's guidelines for voltage levels, timing specifications, and ESD protection to ensure proper operation and avoid damage to the chip.

Please note that these answers are general and may vary depending on the specific requirements and implementation of the technical solution.