Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
AT27C2048-55VI

AT27C2048-55VI

Product Overview

Category

AT27C2048-55VI belongs to the category of programmable read-only memory (PROM) chips.

Use

This product is commonly used in electronic devices for storing permanent data that cannot be modified or erased. It provides non-volatile storage capabilities, making it ideal for applications where data integrity is crucial.

Characteristics

  • Non-volatile: The stored data remains intact even when power is removed.
  • High capacity: The AT27C2048-55VI has a capacity of 2,048 kilobits (256 kilobytes).
  • Fast access time: With a speed rating of 55 nanoseconds, it ensures quick retrieval of data.
  • Low power consumption: The chip operates efficiently, minimizing power requirements.
  • Durable: Designed to withstand harsh environmental conditions and provide reliable performance.

Package

The AT27C2048-55VI is available in a standard 28-pin dual in-line package (DIP), which is widely used in the electronics industry.

Essence

The essence of this product lies in its ability to store large amounts of data reliably and securely, ensuring long-term data retention without the risk of accidental modification or erasure.

Packaging/Quantity

The AT27C2048-55VI is typically packaged in reels or tubes, with each package containing a specified quantity of chips. The exact packaging and quantity may vary depending on the manufacturer and customer requirements.

Specifications

  • Capacity: 2,048 kilobits (256 kilobytes)
  • Access Time: 55 nanoseconds
  • Supply Voltage: 5 volts
  • Operating Temperature Range: -40°C to +85°C
  • Data Retention: More than 20 years
  • Programming Method: One-time programmable (OTP)

Detailed Pin Configuration

The AT27C2048-55VI has a total of 28 pins, each serving a specific function. The pin configuration is as follows:

  1. A0 - Address Input
  2. A1 - Address Input
  3. A2 - Address Input
  4. A3 - Address Input
  5. A4 - Address Input
  6. A5 - Address Input
  7. A6 - Address Input
  8. A7 - Address Input
  9. A8 - Address Input
  10. A9 - Address Input
  11. A10 - Address Input
  12. A11 - Address Input
  13. A12 - Address Input
  14. A13 - Address Input
  15. A14 - Address Input
  16. A15 - Address Input
  17. /OE - Output Enable
  18. /CE - Chip Enable
  19. /WE - Write Enable
  20. VSS - Ground
  21. DQ0 - Data Output
  22. DQ1 - Data Output
  23. DQ2 - Data Output
  24. DQ3 - Data Output
  25. DQ4 - Data Output
  26. DQ5 - Data Output
  27. DQ6 - Data Output
  28. DQ7 - Data Output

Functional Features

The AT27C2048-55VI offers the following functional features:

  • High-speed data access: The chip allows for fast retrieval of stored data.
  • One-time programmable: Once programmed, the data cannot be modified or erased, ensuring data integrity.
  • Low power consumption: The chip operates efficiently, minimizing power requirements.
  • Reliable performance: Designed to withstand environmental stress and provide long-term data retention.

Advantages and Disadvantages

Advantages

  • Large storage capacity
  • Fast access time
  • Non-volatile data storage
  • Durable and reliable performance
  • Low power consumption

Disadvantages

  • One-time programmable, cannot be modified or erased after programming
  • Relatively higher cost compared to other memory technologies

Working Principles

The AT27C2048-55VI operates based on the principle of electrical charge trapping. The data is stored in a matrix of memory cells, with each cell representing a bit of information. When a specific address is accessed, the corresponding memory cell's state is read and output as data.

Detailed Application Field Plans

The AT27C2048-55VI finds applications in various fields, including:

  1. Embedded Systems: Used for firmware storage in microcontrollers and other embedded devices.
  2. Automotive Electronics: Employed for storing critical data in automotive systems such as engine control units (ECUs) and infotainment systems.
  3. Industrial Control Systems: Utilized for program storage in industrial automation and control systems.
  4. Medical Devices: Used for storing firmware and configuration data in medical equipment.
  5. Consumer Electronics: Employed in devices like gaming consoles, set-top boxes, and digital cameras for non-volatile data storage.

Detailed and Complete Alternative Models

Some alternative models

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací AT27C2048-55VI v technických řešeních

Sure! Here are 10 common questions and answers related to the application of AT27C2048-55VI in technical solutions:

  1. Q: What is the AT27C2048-55VI? A: The AT27C2048-55VI is a 2-megabit (256K x 8) low-power, high-performance CMOS EPROM (Electrically Programmable Read-Only Memory) integrated circuit.

  2. Q: What are the key features of the AT27C2048-55VI? A: Some key features include a fast access time of 55ns, low power consumption, wide operating voltage range, and compatibility with various programming equipment.

  3. Q: How can the AT27C2048-55VI be used in technical solutions? A: It can be used for storing firmware, program code, or data in embedded systems, microcontrollers, industrial control systems, automotive applications, and other electronic devices.

  4. Q: Can the AT27C2048-55VI be reprogrammed? A: No, the AT27C2048-55VI is a one-time programmable EPROM, meaning its contents cannot be changed once programmed.

  5. Q: What is the maximum operating frequency of the AT27C2048-55VI? A: The AT27C2048-55VI can operate at frequencies up to 18 MHz.

  6. Q: What is the supply voltage range for the AT27C2048-55VI? A: The supply voltage range is typically between 4.5V and 5.5V.

  7. Q: Does the AT27C2048-55VI require any external components for operation? A: Yes, it requires a power supply, decoupling capacitors, and an address bus for selecting memory locations.

  8. Q: Can the AT27C2048-55VI withstand high temperatures? A: Yes, the AT27C2048-55VI is designed to operate in a wide temperature range, typically from -40°C to 85°C.

  9. Q: Is the AT27C2048-55VI compatible with standard microcontrollers? A: Yes, the AT27C2048-55VI has a standard parallel interface and can be easily interfaced with most microcontrollers.

  10. Q: Are there any special precautions to consider when handling the AT27C2048-55VI? A: It is important to follow proper ESD (Electrostatic Discharge) handling procedures to prevent damage to the IC. Additionally, care should be taken to avoid exposing the device to excessive heat or moisture.