AT27BV010-15TI

Product Overview

Category

AT27BV010-15TI belongs to the category of non-volatile memory devices.

Use

This product is primarily used for storing and retrieving data in electronic systems.

Characteristics

• Non-volatile: The stored data remains intact even when power is removed.
• High-speed operation: Offers fast read and write access times.
• Low power consumption: Designed to minimize energy usage.
• Reliable: Provides high endurance and data retention capabilities.
• Wide temperature range: Suitable for use in various environmental conditions.

Package

AT27BV010-15TI is available in a compact and durable package, designed to protect the internal components from external factors such as moisture and physical damage.

Essence

The essence of AT27BV010-15TI lies in its ability to provide reliable and non-volatile storage for electronic systems, ensuring data integrity and accessibility.

Packaging/Quantity

This product is typically packaged in reels or tubes, with each containing a specific quantity of AT27BV010-15TI units. The exact packaging and quantity may vary depending on the supplier.

Specifications

• Memory capacity: 1 Megabit (128 K x 8)
• Operating voltage: 2.7V - 3.6V
• Access time: 150 nanoseconds
• Standby current: 100 microamps (max)
• Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

The AT27BV010-15TI has a total of 32 pins, each serving a specific function. The pin configuration is as follows:

1. A0 - Address input bit 0
2. A1 - Address input bit 1
3. A2 - Address input bit 2
4. A3 - Address input bit 3
5. A4 - Address input bit 4
6. A5 - Address input bit 5
7. A6 - Address input bit 6
8. A7 - Address input bit 7
9. VCC - Power supply voltage
10. CE - Chip enable
11. OE - Output enable
12. WE - Write enable
13. I/O0 - Data input/output bit 0
14. I/O1 - Data input/output bit 1
15. I/O2 - Data input/output bit 2
16. I/O3 - Data input/output bit 3
17. I/O4 - Data input/output bit 4
18. I/O5 - Data input/output bit 5
19. I/O6 - Data input/output bit 6
20. I/O7 - Data input/output bit 7
21. NC - No connection
22. GND - Ground
23. A8 - Address input bit 8
24. A9 - Address input bit 9
25. A10 - Address input bit 10
26. A11 - Address input bit 11
27. A12 - Address input bit 12
28. A13 - Address input bit 13
29. A14 - Address input bit 14
30. A15 - Address input bit 15
31. NC - No connection
32. WP - Write protect

Functional Features

• Random access: Allows for the retrieval of data from any memory location.
• Byte-wise programming: Enables individual bytes to be programmed without affecting others.
• Erase capability: Supports sector erase and chip erase operations.
• Hardware and software protection: Provides mechanisms to prevent unauthorized access or modification of data.

Advantages and Disadvantages

Advantages

• Non-volatile storage ensures data integrity even during power loss.
• High-speed operation allows for efficient data access.
• Low power consumption minimizes energy usage.
• Reliable performance with high endurance and data retention capabilities.
• Wide temperature range makes it suitable for various environments.

Disadvantages

• Limited storage capacity compared to other memory devices.
• Higher cost per unit compared to some alternative models.
• Requires careful handling to avoid physical damage.

Working Principles

AT27BV010-15TI utilizes a combination of electronic circuits and memory cells to store and retrieve data. The memory cells consist of transistors that can be electrically programmed and erased. When data is written, the electrical charge is stored in these memory cells. During read operations, the stored charge is detected and converted back into usable data.

Detailed Application Field Plans

AT27BV010-15TI finds applications in various electronic systems, including but not limited to: - Embedded systems - Consumer electronics - Automotive electronics - Industrial control systems - Medical devices

In embedded systems, this non-volatile memory device can be used for firmware storage, configuration data, or parameter settings. In consumer electronics, it can be utilized for storing user preferences, system settings, or firmware updates