Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
AT24C11N-10SI-2.7-T

AT24C11N-10SI-2.7-T

Overview

Product Category

AT24C11N-10SI-2.7-T belongs to the category of Serial EEPROM (Electrically Erasable Programmable Read-Only Memory) integrated circuits.

Use

This product is primarily used for non-volatile data storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.

Characteristics

  • Non-volatile memory: The AT24C11N-10SI-2.7-T retains stored data even when power is removed.
  • High storage capacity: This EEPROM chip has a storage capacity of 1,024 bits (128 bytes).
  • Serial interface: It communicates using a two-wire I2C serial interface protocol.
  • Low power consumption: The AT24C11N-10SI-2.7-T operates at a low voltage of 2.7V and consumes minimal power during read and write operations.

Package

The AT24C11N-10SI-2.7-T is available in an industry-standard 8-pin Small Outline Integrated Circuit (SOIC) package.

Essence

The essence of this product lies in its ability to provide reliable and non-volatile data storage in a compact and low-power package.

Packaging/Quantity

The AT24C11N-10SI-2.7-T is typically sold in reels or tubes, with each reel containing 2,000 units.

Specifications

  • Operating Voltage: 2.7V - 5.5V
  • Maximum Clock Frequency: 400 kHz
  • Write Cycle Time: 5 ms (maximum)
  • Data Retention: 100 years (minimum)
  • Endurance: 1 million write cycles (minimum)

Pin Configuration

The AT24C11N-10SI-2.7-T features an 8-pin SOIC package with the following pin configuration:

  1. A0: Address Input
  2. A1: Address Input
  3. A2: Address Input
  4. GND: Ground
  5. SDA: Serial Data Input/Output
  6. SCL: Serial Clock Input
  7. WP: Write Protect
  8. VCC: Power Supply

Functional Features

  • Random Access: The AT24C11N-10SI-2.7-T allows random access to any memory location, enabling efficient data retrieval.
  • Byte-Level Read and Write: It supports byte-level read and write operations, providing flexibility in data manipulation.
  • Hardware Write Protection: The WP pin can be used to protect the memory from accidental writes, enhancing data integrity.
  • Self-Timed Programming: The chip automatically manages internal write timing, simplifying the programming process.

Advantages and Disadvantages

Advantages

  • Non-volatile storage ensures data retention even during power loss.
  • Compact size and low power consumption make it suitable for various portable electronic devices.
  • High endurance and long data retention period ensure reliable performance over an extended lifespan.
  • Easy integration with microcontrollers and other digital systems due to the standard I2C interface.

Disadvantages

  • Limited storage capacity compared to other EEPROM variants.
  • Relatively slower write cycle time may impact real-time applications.

Working Principles

The AT24C11N-10SI-2.7-T utilizes a floating-gate transistor structure to store data. When writing, an electric charge is applied to the floating gate, altering its electrical characteristics. This change determines whether the corresponding memory cell represents a logical "0" or "1". During reading, the stored charge is measured, allowing the retrieval of the stored data.

Detailed Application Field Plans

The AT24C11N-10SI-2.7-T finds applications in various fields, including:

  1. Embedded Systems: Used for storing configuration data, calibration values, and firmware updates in microcontroller-based systems.
  2. Industrial Automation: Enables parameter storage and data logging in industrial control systems.
  3. Consumer Electronics: Utilized in devices like smart TVs, set-top boxes, and gaming consoles for storing user preferences and settings.
  4. Automotive Electronics: Employed for storing critical data, such as mileage, fault codes, and user preferences, in automotive electronic control units (ECUs).
  5. Medical Devices: Used for storing patient information, device configurations, and calibration data in medical equipment.

Detailed and Complete Alternative Models

  1. AT24C01A: 1K-bit (128-byte) EEPROM with similar specifications and package options.
  2. AT24C21N-10SI-2.7-T: 2K-bit (256-byte) EEPROM with the same package and operating characteristics.
  3. AT24C64C-SSHM-T: 64K-bit (8KB) EEPROM with extended temperature range and smaller package options.

These alternative models offer different storage capacities and may have additional

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací AT24C11N-10SI-2.7-T v technických řešeních

Sure! Here are 10 common questions and answers related to the application of AT24C11N-10SI-2.7-T in technical solutions:

  1. Q: What is the AT24C11N-10SI-2.7-T? A: The AT24C11N-10SI-2.7-T is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) chip manufactured by Microchip Technology.

  2. Q: What is the storage capacity of the AT24C11N-10SI-2.7-T? A: The AT24C11N-10SI-2.7-T has a storage capacity of 1 kilobit (128 bytes).

  3. Q: What is the operating voltage range for the AT24C11N-10SI-2.7-T? A: The AT24C11N-10SI-2.7-T operates within a voltage range of 2.7V to 5.5V.

  4. Q: What is the maximum clock frequency supported by the AT24C11N-10SI-2.7-T? A: The AT24C11N-10SI-2.7-T supports a maximum clock frequency of 400 kHz.

  5. Q: Can the AT24C11N-10SI-2.7-T be used for storing user data in embedded systems? A: Yes, the AT24C11N-10SI-2.7-T can be used to store user data in various embedded systems such as microcontrollers, sensors, and other electronic devices.

  6. Q: Does the AT24C11N-10SI-2.7-T support both read and write operations? A: Yes, the AT24C11N-10SI-2.7-T supports both read and write operations, allowing users to store and retrieve data as needed.

  7. Q: Is the AT24C11N-10SI-2.7-T compatible with I2C communication protocol? A: Yes, the AT24C11N-10SI-2.7-T is designed to be compatible with the I2C (Inter-Integrated Circuit) communication protocol.

  8. Q: Can multiple AT24C11N-10SI-2.7-T chips be connected together in a system? A: Yes, multiple AT24C11N-10SI-2.7-T chips can be connected together on the same I2C bus, allowing for increased storage capacity if required.

  9. Q: Does the AT24C11N-10SI-2.7-T have built-in security features? A: No, the AT24C11N-10SI-2.7-T does not have built-in security features. If security is required, additional measures need to be implemented in the system.

  10. Q: What are some typical applications of the AT24C11N-10SI-2.7-T? A: The AT24C11N-10SI-2.7-T is commonly used in applications such as smart cards, industrial control systems, medical devices, and automotive electronics where low-power, non-volatile memory storage is required.

Please note that these answers are general and may vary depending on specific requirements and use cases.