Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
AT24C08BN-SH-T

AT24C08BN-SH-T

Product Overview

Category

AT24C08BN-SH-T belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

This chip is commonly used for non-volatile data storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.

Characteristics

  • Electrically erasable: The AT24C08BN-SH-T can be erased and reprogrammed electrically, eliminating the need for UV light exposure.
  • Non-volatile: The stored data remains intact even when power is removed.
  • High storage capacity: This chip has a storage capacity of 8 kilobits (1 kilobyte).
  • Low power consumption: It operates at low voltage and consumes minimal power.
  • I2C interface: The AT24C08BN-SH-T communicates using the I2C protocol, allowing easy integration into various systems.

Package

The AT24C08BN-SH-T is available in an industry-standard 8-pin Small Outline Integrated Circuit (SOIC) package.

Essence

The essence of AT24C08BN-SH-T lies in its ability to provide reliable and non-volatile data storage in a compact and low-power package.

Packaging/Quantity

This chip is typically sold in reels or tubes, with each reel containing 2500 units.

Specifications

  • Storage Capacity: 8 kilobits (1024 bytes)
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Write Cycle Endurance: 1 million cycles
  • Data Retention: 100 years

Pin Configuration

The AT24C08BN-SH-T has the following pin configuration:

```


| | | 1 2 3 4| | | | 8 7 6 5| |___________| ```

  1. A0: Address Input
  2. A1: Address Input
  3. A2: Address Input
  4. GND: Ground
  5. SDA: Serial Data Input/Output
  6. SCL: Serial Clock Input
  7. WP: Write Protect
  8. VCC: Power Supply

Functional Features

  • Random Access: The AT24C08BN-SH-T allows random access to any memory location, enabling efficient data retrieval.
  • Byte-level Read/Write: It supports byte-level read and write operations, providing flexibility in data manipulation.
  • Hardware Write Protection: The WP pin can be used to protect the stored data from accidental writes, enhancing data integrity.
  • Sequential Read: This chip supports sequential read operations, allowing for faster data retrieval.

Advantages and Disadvantages

Advantages

  • Non-volatile storage ensures data integrity even during power loss.
  • Low power consumption makes it suitable for battery-powered devices.
  • Compact package size enables integration into space-constrained designs.
  • High endurance of write cycles ensures long-term reliability.

Disadvantages

  • Limited storage capacity compared to other memory technologies.
  • Slower write speeds compared to volatile memory types.
  • Relatively higher cost per kilobyte compared to some alternative memory solutions.

Working Principles

The AT24C08BN-SH-T utilizes a floating-gate transistor structure to store data. When a voltage is applied, electrons are trapped in the floating gate, representing a logical "1." Conversely, when the voltage is removed, the absence of trapped electrons represents a logical "0." The stored data can be read, written, or erased by applying appropriate electrical signals.

Detailed Application Field Plans

The AT24C08BN-SH-T finds applications in various fields, including:

  1. Embedded Systems: Used for storing configuration data, firmware updates, and calibration parameters in microcontrollers and system-on-chips.
  2. Industrial Automation: Enables storage of critical data, such as sensor calibration values and production logs, in industrial control systems.
  3. Automotive Electronics: Utilized for storing vehicle-specific settings, mileage data, and fault codes in automotive electronic control units (ECUs).
  4. Consumer Electronics: Integrated into devices like smart TVs, set-top boxes, and gaming consoles to store user preferences, channel lists, and game progress.

Detailed and Complete Alternative Models

  • AT24C01A
  • AT24C02B
  • AT24C04C
  • AT24C16N
  • AT24C32D
  • AT24C64E
  • AT24C128F
  • AT24C256H
  • AT24C512I

These alternative models offer varying storage capacities and features, allowing users to choose the most suitable option for their specific requirements.

In conclusion, the AT24C08BN-SH-T

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací AT24C08BN-SH-T v technických řešeních

Sure! Here are 10 common questions and answers related to the application of AT24C08BN-SH-T in technical solutions:

  1. Q: What is AT24C08BN-SH-T? A: AT24C08BN-SH-T is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) chip manufactured by Microchip Technology. It has a storage capacity of 8 kilobits (1 kilobyte) and operates on the I2C communication protocol.

  2. Q: What are the typical applications of AT24C08BN-SH-T? A: AT24C08BN-SH-T is commonly used for storing configuration data, calibration values, and other small amounts of non-volatile data in various electronic devices such as microcontrollers, sensors, and industrial control systems.

  3. Q: How does AT24C08BN-SH-T connect to a microcontroller or other devices? A: AT24C08BN-SH-T uses the I2C bus interface, which requires two lines - SDA (Serial Data) and SCL (Serial Clock). These lines are connected to the corresponding pins on the microcontroller or other devices.

  4. Q: What is the operating voltage range of AT24C08BN-SH-T? A: AT24C08BN-SH-T operates within a voltage range of 1.7V to 5.5V, making it compatible with a wide range of microcontrollers and other devices.

  5. Q: Can AT24C08BN-SH-T be easily soldered onto a PCB? A: Yes, AT24C08BN-SH-T comes in a standard 8-pin SOIC (Small Outline Integrated Circuit) package, which can be easily soldered onto a PCB using conventional surface mount techniques.

  6. Q: Does AT24C08BN-SH-T support write protection? A: Yes, AT24C08BN-SH-T provides hardware write protection by using a dedicated pin (WP) that can be connected to a microcontroller's GPIO pin or set to a fixed logic level to prevent accidental writes.

  7. Q: What is the maximum clock frequency supported by AT24C08BN-SH-T? A: AT24C08BN-SH-T supports a maximum clock frequency of 1 MHz, allowing for fast data transfer between the chip and the microcontroller.

  8. Q: Can AT24C08BN-SH-T operate in extreme temperature conditions? A: Yes, AT24C08BN-SH-T has an extended temperature range of -40°C to +125°C, making it suitable for applications that require operation in harsh environments.

  9. Q: How many write cycles does AT24C08BN-SH-T support? A: AT24C08BN-SH-T supports a minimum of 1 million write cycles, ensuring durability and reliability for frequent data updates.

  10. Q: Is AT24C08BN-SH-T compatible with other EEPROM chips from Microchip? A: Yes, AT24C08BN-SH-T follows the same I2C protocol as other EEPROM chips from Microchip, making it easy to integrate with existing designs and systems.

Please note that these answers are general and may vary depending on specific requirements and datasheet specifications.