Microchip Technology
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
93LC66B-I/ST
Zobrazit detail DataSheets

Encyclopedia Entry: 93LC66B-I/ST

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Non-volatile Serial EEPROM Memory
  • Characteristics: Small form factor, low power consumption, high reliability
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: The 93LC66B-I/ST is a non-volatile memory chip that can store and retrieve data even when the power is turned off.
  • Packaging/Quantity: Available in tape and reel packaging, with a quantity of 2500 units per reel.

Specifications

  • Memory Size: 4Kbits (512 x 8 bits)
  • Interface: Serial I2C (Inter-Integrated Circuit) bus
  • Operating Voltage: 2.5V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Write Endurance: 1 Million cycles
  • Data Retention: 200 years

Detailed Pin Configuration

The 93LC66B-I/ST has a total of 8 pins: 1. VCC: Power supply voltage 2. SDA: Serial Data Input/Output 3. SCL: Serial Clock Input 4. WP: Write Protect (optional) 5. VSS: Ground 6. NC: No Connection 7. NC: No Connection 8. VCC: Power supply voltage

Functional Features

  • Non-volatile memory: Retains data even without power
  • Serial interface: Uses I2C bus for communication
  • High-speed operation: Supports clock frequencies up to 400kHz
  • Low power consumption: Ideal for battery-powered devices
  • Write protection: Optional write protect feature for data security

Advantages

  • Compact size allows for integration into small electronic devices
  • Low power consumption extends battery life
  • High reliability ensures data integrity
  • Easy integration with microcontrollers and other ICs using the I2C interface

Disadvantages

  • Limited storage capacity compared to larger memory chips
  • Slower write and read speeds compared to some other memory technologies
  • Vulnerable to electromagnetic interference (EMI) due to its small size

Working Principles

The 93LC66B-I/ST utilizes EEPROM (Electrically Erasable Programmable Read-Only Memory) technology. It stores data by electrically charging and discharging specific memory cells within the chip. The I2C bus is used for communication between the chip and the controlling device, allowing for easy reading and writing of data.

Detailed Application Field Plans

The 93LC66B-I/ST is commonly used in various electronic devices that require non-volatile memory for storing configuration settings, calibration data, or user preferences. Some typical application fields include: - Consumer electronics: TVs, set-top boxes, audio players - Automotive: Engine control units, infotainment systems - Industrial automation: Programmable logic controllers, sensors - Medical devices: Patient monitoring systems, diagnostic equipment

Detailed Alternative Models

  1. 93LC66A-I/ST: Similar specifications but with a different memory organization.
  2. 93LC66C-I/ST: Higher endurance and extended temperature range variant.
  3. 93LC66D-I/ST: Lower power consumption version with reduced operating voltage.

Note: This encyclopedia entry provides an overview of the 93LC66B-I/ST. For more detailed information, please refer to the product datasheet or consult the manufacturer's documentation.

Word Count: 452 words

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací 93LC66B-I/ST v technických řešeních

  1. What is the 93LC66B-I/ST used for?

    • The 93LC66B-I/ST is a serial electrically erasable programmable read-only memory (EEPROM) that is commonly used for storing small amounts of data in various technical solutions.

  2. What is the storage capacity of the 93LC66B-I/ST?

    • The 93LC66B-I/ST has a storage capacity of 4 kilobits (512 x 8).

  3. What are the typical applications of the 93LC66B-I/ST?

    • Typical applications include storing configuration data, calibration constants, and other small amounts of non-volatile data in microcontroller-based systems.

  4. What is the interface protocol for accessing the 93LC66B-I/ST?

    • The 93LC66B-I/ST uses a simple 3-wire serial interface (clock, data in, and data out) for communication with microcontrollers or other digital devices.

  5. Can the 93LC66B-I/ST be reprogrammed?

    • Yes, the 93LC66B-I/ST supports reprogramming, allowing for updates or changes to the stored data.

  6. What are the voltage requirements for the 93LC66B-I/ST?

    • The 93LC66B-I/ST operates within a wide voltage range, typically from 2.5V to 5.5V.

  7. Does the 93LC66B-I/ST have built-in security features?

    • The 93LC66B-I/ST does not have advanced security features, so additional measures may be needed to protect the data if required.

  8. What is the operating temperature range of the 93LC66B-I/ST?

    • The 93LC66B-I/ST is designed to operate within a temperature range of -40°C to 85°C, making it suitable for various environmental conditions.

  9. Is the 93LC66B-I/ST compatible with standard microcontroller interfaces?

    • Yes, the 93LC66B-I/ST is compatible with standard SPI (Serial Peripheral Interface) and Microwire interfaces commonly found in microcontrollers.

  10. Are there any special considerations for PCB layout when using the 93LC66B-I/ST?

    • It's important to follow the manufacturer's recommended layout guidelines to ensure reliable operation and signal integrity when integrating the 93LC66B-I/ST into a PCB design.