Microchip Technology
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
24LC02BHT-I/MS
Zobrazit detail DataSheets

24LC02BHT-I/MS

Product Overview

Category

The 24LC02BHT-I/MS belongs to the category of electrically erasable programmable read-only memory (EEPROM) integrated circuits.

Use

It is commonly used for non-volatile data storage in various electronic devices, including consumer electronics, industrial equipment, and automotive applications.

Characteristics

  • Non-volatile memory
  • I2C serial interface
  • Low power consumption
  • Small form factor

Package

The 24LC02BHT-I/MS is available in a standard 8-pin SOIC (Small Outline Integrated Circuit) package.

Essence

This EEPROM IC provides reliable and durable data storage capabilities for electronic devices.

Packaging/Quantity

It is typically supplied in reels with a quantity of 2500 units per reel.

Specifications

  • Memory Size: 2 Kbits
  • Interface: I2C
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature Range: -40°C to 125°C
  • Write Cycle Endurance: 1,000,000 cycles
  • Data Retention: 200 years

Detailed Pin Configuration

  1. A0 - Chip Address Input
  2. A1 - Chip Address Input
  3. A2 - Chip Address Input
  4. VSS - Ground
  5. SDA - Serial Data
  6. SCL - Serial Clock
  7. WP - Write Protect
  8. VCC - Power Supply

Functional Features

  • Byte and Page Write Modes
  • Self-timed Write Cycle
  • 128-byte Page Write Buffer
  • Sequential Read Operation
  • Write Protect Pin for Hardware Data Protection

Advantages

  • Small form factor
  • Low power consumption
  • High data retention
  • Compatibility with I2C interface
  • Reliable and durable data storage

Disadvantages

  • Limited storage capacity compared to other memory technologies
  • Slower write speeds compared to volatile memory

Working Principles

The 24LC02BHT-I/MS operates by utilizing an I2C serial interface to communicate with the host microcontroller. It stores and retrieves data through byte and page write operations, providing non-volatile memory storage for the connected device.

Detailed Application Field Plans

The 24LC02BHT-I/MS is widely used in applications such as: - Smartphones and tablets for storing configuration data - Automotive electronics for storing calibration parameters - Industrial control systems for non-volatile data storage - IoT devices for storing sensor data

Detailed and Complete Alternative Models

  • 24LC04B-I/P: 4 Kbit I2C Serial EEPROM
  • 24LC16B-I/SN: 16 Kbit I2C Serial EEPROM
  • 24LC64-I/P: 64 Kbit I2C Serial EEPROM

In conclusion, the 24LC02BHT-I/MS is a versatile EEPROM IC that offers reliable non-volatile data storage in a compact form factor, making it suitable for a wide range of electronic applications.

Word Count: 443

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací 24LC02BHT-I/MS v technických řešeních

  1. What is the 24LC02BHT-I/MS?

    • The 24LC02BHT-I/MS is a 2K-bit serial electrically erasable programmable read-only memory (EEPROM) with I2C interface.

  2. What are the typical applications of the 24LC02BHT-I/MS?

    • It is commonly used for storing configuration data, calibration constants, and other non-volatile data in various technical solutions such as industrial control systems, consumer electronics, and automotive applications.

  3. What is the operating voltage range of the 24LC02BHT-I/MS?

    • The 24LC02BHT-I/MS operates within a voltage range of 1.7V to 5.5V, making it suitable for a wide variety of applications.

  4. What is the maximum clock frequency supported by the 24LC02BHT-I/MS?

    • The device supports clock frequencies up to 400 kHz, allowing for efficient data transfer in I2C communication.

  5. Can the 24LC02BHT-I/MS be cascaded with other devices?

    • Yes, the 24LC02BHT-I/MS can be easily cascaded with additional EEPROM or other I2C devices, enabling expansion of memory capacity or integration with other peripherals.

  6. Does the 24LC02BHT-I/MS support write protection?

    • Yes, the device features a write-protect pin that can be utilized to prevent inadvertent write operations, enhancing data integrity and security.

  7. What is the typical endurance of the 24LC02BHT-I/MS?

    • The 24LC02BHT-I/MS has a typical endurance of 1,000,000 write cycles, ensuring reliable and long-lasting performance in various applications.

  8. Is the 24LC02BHT-I/MS capable of operating in harsh environments?

    • Yes, the device is designed to withstand extended temperature ranges and is well-suited for use in industrial and automotive environments.

  9. What are the package options available for the 24LC02BHT-I/MS?

    • The 24LC02BHT-I/MS is offered in various package options, including the standard 8-pin SOIC package, providing flexibility for different design requirements.

  10. Are there any special considerations for interfacing with the 24LC02BHT-I/MS?

    • When interfacing with the 24LC02BHT-I/MS, attention should be given to proper signal routing, decoupling, and addressing to ensure reliable communication and operation within the system.