Maxim Integrated
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
MAX6765TTSD2/V+T
Zobrazit detail DataSheets

MAX6765TTSD2/V+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: Thin SOT23-6
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 1.8V to 3.3V
  • Maximum Output Current: 500mA
  • Dropout Voltage: 120mV at 100mA
  • Quiescent Current: 17µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX6765TTSD2/V+T has a total of six pins:

  1. GND: Ground pin.
  2. EN: Enable pin for turning the regulator on or off.
  3. FB: Feedback pin for adjusting the output voltage.
  4. OUT: Output pin for providing regulated voltage.
  5. IN: Input pin for supplying power to the regulator.
  6. NC: No connection pin.

Functional Features

  • Low dropout voltage enables efficient regulation even with low input voltages.
  • Ultra-low quiescent current ensures minimal power consumption during standby or idle mode.
  • Built-in thermal shutdown protection prevents damage due to excessive temperature.
  • Short-circuit and overcurrent protection safeguards the regulator and connected devices.
  • Fast transient response allows for stable operation during load changes.

Advantages and Disadvantages

Advantages: - High efficiency results in reduced power dissipation. - Wide input voltage range accommodates various power sources. - Small package size saves board space. - Excellent line and load regulation ensures stable output voltage.

Disadvantages: - Limited maximum output current may not be suitable for high-power applications. - Dropout voltage may affect performance in low voltage scenarios.

Working Principles

The MAX6765TTSD2/V+T is a voltage regulator that converts an input voltage into a regulated output voltage. It utilizes a feedback mechanism to adjust the output voltage based on the reference voltage and the feedback voltage. The enable pin allows for control of the regulator's operation, while the thermal shutdown and overcurrent protection features ensure safe operation under different conditions.

Detailed Application Field Plans

The MAX6765TTSD2/V+T is commonly used in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT (Internet of Things) devices - Wearable devices - Industrial automation systems

Detailed and Complete Alternative Models

  1. MAX6764TTSD2/V+T: Similar specifications with a different package (Thin SOT23-5).
  2. MAX6766TTSD2/V+T: Higher maximum output current (800mA) with similar characteristics and package.
  3. MAX6767TTSD2/V+T: Lower dropout voltage (80mV at 100mA) with comparable specifications and package.

These alternative models provide flexibility in choosing the most suitable voltage regulator for specific application requirements.

Word count: 343 words

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací MAX6765TTSD2/V+T v technických řešeních

  1. What is the maximum input voltage for MAX6765TTSD2/V+T?
    - The maximum input voltage for MAX6765TTSD2/V+T is 5.5V.

  2. What is the typical quiescent current for MAX6765TTSD2/V+T?
    - The typical quiescent current for MAX6765TTSD2/V+T is 4µA.

  3. Can MAX6765TTSD2/V+T be used in automotive applications?
    - Yes, MAX6765TTSD2/V+T is suitable for automotive applications.

  4. What is the operating temperature range for MAX6765TTSD2/V+T?
    - The operating temperature range for MAX6765TTSD2/V+T is -40°C to +125°C.

  5. Does MAX6765TTSD2/V+T have built-in overvoltage protection?
    - Yes, MAX6765TTSD2/V+T features built-in overvoltage protection.

  6. Can MAX6765TTSD2/V+T be used in battery-powered applications?
    - Yes, MAX6765TTSD2/V+T is suitable for battery-powered applications.

  7. What is the output voltage accuracy of MAX6765TTSD2/V+T?
    - The output voltage accuracy of MAX6765TTSD2/V+T is ±1%.

  8. Is MAX6765TTSD2/V+T available in a small package size?
    - Yes, MAX6765TTSD2/V+T is available in a small 6-pin SOT23 package.

  9. Can MAX6765TTSD2/V+T be used in industrial control systems?
    - Yes, MAX6765TTSD2/V+T is suitable for use in industrial control systems.

  10. What is the typical dropout voltage for MAX6765TTSD2/V+T?
    - The typical dropout voltage for MAX6765TTSD2/V+T is 160mV at 100mA load current.