Maxim Integrated
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
MAX6760TATGD3+T
Zobrazit detail DataSheets

MAX6760TATGD3+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: TDFN-8 (Thin Dual Flat No-Lead)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to 5.5V
  • Maximum Output Current: 1A
  • Quiescent Current: 17µA
  • Dropout Voltage: 120mV at 500mA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MAX6760TATGD3+T has a total of 8 pins:

  1. EN (Enable): Active-high enable input pin.
  2. GND (Ground): Ground reference for the IC.
  3. FB (Feedback): Feedback voltage input pin.
  4. VOUT (Output Voltage): Output voltage pin.
  5. VIN (Input Voltage): Input voltage pin.
  6. NC (No Connection): Not connected pin.
  7. PG (Power Good): Power good output pin.
  8. SS (Soft-Start): Soft-start capacitor connection pin.

Functional Features

  • High efficiency voltage regulator with low power consumption.
  • Wide input voltage range allows for versatile applications.
  • Adjustable output voltage provides flexibility in design.
  • Power good output signal indicates stable output voltage.
  • Soft-start feature ensures smooth startup and reduces inrush current.

Advantages and Disadvantages

Advantages: - High efficiency results in reduced power dissipation. - Wide input voltage range accommodates various power sources. - Adjustable output voltage allows customization for specific requirements. - Power good output signal provides system status indication. - Soft-start feature prevents voltage spikes during startup.

Disadvantages: - Limited maximum output current of 1A may not be suitable for high-power applications. - Dropout voltage of 120mV at 500mA may affect efficiency in low input voltage scenarios.

Working Principles

The MAX6760TATGD3+T is a voltage regulator IC that converts an input voltage within the range of 2.7V to 5.5V to a regulated output voltage between 0.6V and 5.5V. It achieves this by utilizing a feedback mechanism that adjusts the internal circuitry to maintain a stable output voltage despite variations in the input voltage or load conditions.

The enable pin (EN) controls the operation of the IC. When the EN pin is high, the regulator is enabled, and it starts regulating the output voltage. Conversely, when the EN pin is low, the regulator enters a low-power shutdown mode, reducing power consumption.

The soft-start feature ensures a controlled startup by gradually ramping up the output voltage, preventing voltage spikes that could damage connected components. The power good (PG) pin provides an output signal indicating that the output voltage has reached a stable level, allowing external circuits to monitor the regulator's performance.

Detailed Application Field Plans

The MAX6760TATGD3+T is commonly used in various applications where efficient voltage regulation is required. Some potential application fields include:

  1. Battery-Powered Devices: Portable electronic devices such as smartphones, tablets, and wearables can benefit from the low power consumption and wide input voltage range of the MAX6760TATGD3+T.

  2. Industrial Control Systems: The voltage regulator can be utilized in industrial control systems to ensure stable and reliable power supply for sensors, actuators, and other components.

  3. Automotive Electronics: With its wide operating temperature range, the MAX6760TATGD3+T can be employed in automotive electronics, providing regulated power for various subsystems.

  4. IoT (Internet of Things) Devices: The voltage regulator's small package size and low quiescent current make it suitable for IoT devices that require efficient power management in limited space.

Detailed and Complete Alternative Models

  1. MAX6761TATGD3+T: Similar to the MAX6760TATGD3+T, but with a higher maximum output current of 2A.
  2. MAX6762TATGD3+T: A variant with an adjustable output voltage range of 0.6V to 3.3V.
  3. MAX6763TATGD3+T: Offers a fixed output voltage of 3.3V, eliminating the need for external feedback resistors.
  4. MAX6764TATGD3+T: Designed for applications requiring a fixed output voltage of 5V.

These alternative models provide options with different specifications and features, allowing designers to select the most suitable voltage regulator for their specific requirements.

(Note: The above content is approximately 400 words. Additional

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací MAX6760TATGD3+T v technických řešeních

Sure! Here are 10 common questions and answers related to the application of MAX6760TATGD3+T in technical solutions:

  1. Q: What is the MAX6760TATGD3+T? A: The MAX6760TATGD3+T is a voltage monitor and sequencer IC designed for use in power management applications.

  2. Q: What is the input voltage range of the MAX6760TATGD3+T? A: The input voltage range of the MAX6760TATGD3+T is typically between 1.6V and 5.5V.

  3. Q: How many voltage monitoring channels does the MAX6760TATGD3+T have? A: The MAX6760TATGD3+T has four voltage monitoring channels.

  4. Q: Can the MAX6760TATGD3+T be used for overvoltage protection? A: Yes, the MAX6760TATGD3+T can be configured to provide overvoltage protection by setting the appropriate threshold levels.

  5. Q: Is the MAX6760TATGD3+T capable of sequencing multiple power supplies? A: Yes, the MAX6760TATGD3+T has built-in sequencing capabilities that allow for proper power-up and power-down sequencing of multiple supplies.

  6. Q: What is the operating temperature range of the MAX6760TATGD3+T? A: The MAX6760TATGD3+T is rated for operation in the temperature range of -40°C to +125°C.

  7. Q: Can the MAX6760TATGD3+T generate an interrupt signal upon detecting a fault condition? A: Yes, the MAX6760TATGD3+T has an open-drain output that can be configured to generate an interrupt signal when a fault condition is detected.

  8. Q: Does the MAX6760TATGD3+T require an external microcontroller for operation? A: No, the MAX6760TATGD3+T is a standalone device and does not require an external microcontroller for basic operation.

  9. Q: Can the MAX6760TATGD3+T be used in automotive applications? A: Yes, the MAX6760TATGD3+T is qualified for automotive applications and meets the necessary standards.

  10. Q: What package options are available for the MAX6760TATGD3+T? A: The MAX6760TATGD3+T is available in a 6-pin TDFN (3mm x 3mm) package.