Maxim Integrated
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
MAX15007CATT/V+T
Zobrazit detail DataSheets

MAX15007CATT/V+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Quiescent Current, Wide Input Voltage Range
  • Package: TDFN-8 (Thin Dual Flat No-Lead)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel / 3000 units per reel

Specifications

  • Input Voltage Range: 4.5V to 60V
  • Output Voltage Range: 1.2V to 57V
  • Maximum Output Current: 500mA
  • Quiescent Current: 10µA
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MAX15007CATT/V+T IC has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. FB: Feedback pin for output voltage regulation
  4. EN: Enable pin for turning the device on/off
  5. SS/TR: Soft-start/Tracking pin for controlling the startup behavior
  6. PG: Power Good pin indicating the output voltage is within regulation limits
  7. SW: Switching node pin for connecting the inductor
  8. VOUT: Output voltage pin

Functional Features

  • Wide input voltage range allows for versatile applications
  • High efficiency ensures minimal power loss
  • Low quiescent current enables energy-saving operation
  • Soft-start feature provides controlled startup behavior
  • Power Good indicator enhances system reliability

Advantages and Disadvantages

Advantages: - Wide input voltage range accommodates various power sources - High efficiency reduces wasted energy and heat dissipation - Low quiescent current prolongs battery life in portable devices - Small package size saves board space - Power Good indicator enhances system reliability

Disadvantages: - Limited maximum output current may not be suitable for high-power applications - Requires external components for operation

Working Principles

The MAX15007CATT/V+T is a voltage regulator IC that converts an input voltage within the range of 4.5V to 60V to a regulated output voltage between 1.2V and 57V. It utilizes a switching regulator topology to achieve high efficiency. The device operates by controlling the duty cycle of an internal switch, which regulates the energy transfer from the input to the output.

Detailed Application Field Plans

The MAX15007CATT/V+T is commonly used in various applications, including but not limited to:

  1. Industrial Automation: Powering control systems, motor drives, and sensors.
  2. Automotive Electronics: Providing power to infotainment systems, lighting modules, and advanced driver-assistance systems (ADAS).
  3. Telecommunications: Powering network equipment, base stations, and communication devices.
  4. Consumer Electronics: Supplying power to audio/video equipment, home appliances, and portable devices.
  5. Renewable Energy: Regulating voltage in solar panels, wind turbines, and energy storage systems.

Detailed and Complete Alternative Models

  1. MAX15008CATT/V+T: Similar specifications with higher maximum output current (1A).
  2. MAX15009CATT/V+T: Similar specifications with lower quiescent current (5µA).
  3. MAX15010CATT/V+T: Similar specifications with wider input voltage range (2.7V to 60V).

These alternative models offer similar functionality and can be considered based on specific application requirements.

Word count: 410 words

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací MAX15007CATT/V+T v technických řešeních

  1. What is the input voltage range of MAX15007CATT/V+T?
    - The input voltage range of MAX15007CATT/V+T is 4.5V to 60V.

  2. What is the maximum output current of MAX15007CATT/V+T?
    - The maximum output current of MAX15007CATT/V+T is 3A.

  3. Can MAX15007CATT/V+T be used in automotive applications?
    - Yes, MAX15007CATT/V+T is suitable for automotive applications.

  4. What is the typical efficiency of MAX15007CATT/V+T?
    - The typical efficiency of MAX15007CATT/V+T is 95%.

  5. Does MAX15007CATT/V+T have overcurrent protection?
    - Yes, MAX15007CATT/V+T features overcurrent protection.

  6. What is the operating temperature range of MAX15007CATT/V+T?
    - The operating temperature range of MAX15007CATT/V+T is -40°C to +125°C.

  7. Is MAX15007CATT/V+T suitable for industrial control systems?
    - Yes, MAX15007CATT/V+T is suitable for industrial control systems.

  8. Can MAX15007CATT/V+T be used in battery-powered applications?
    - Yes, MAX15007CATT/V+T can be used in battery-powered applications.

  9. What type of package does MAX15007CATT/V+T come in?
    - MAX15007CATT/V+T is available in a 28-pin TQFN package.

  10. Does MAX15007CATT/V+T require an external compensation network?
    - No, MAX15007CATT/V+T has an integrated compensation network.