Maxim Integrated
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
ICL7109CPL+2
Zobrazit detail DataSheets

ICL7109CPL+2

Product Overview

Category

The ICL7109CPL+2 belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in various electronic devices for precision analog-to-digital conversion.

Characteristics

  • High accuracy and resolution
  • Low power consumption
  • Wide operating voltage range
  • Compact package size

Package

The ICL7109CPL+2 is available in a 40-pin plastic dual in-line package (DIP).

Essence

The essence of the ICL7109CPL+2 lies in its ability to accurately convert analog signals into digital data, making it suitable for applications requiring precise measurements.

Packaging/Quantity

The ICL7109CPL+2 is typically packaged in reels or tubes, with a quantity of 25 units per reel/tube.

Specifications

  • Resolution: 12 bits
  • Conversion Time: 100 µs
  • Operating Voltage Range: 4.5V to 6.5V
  • Power Consumption: 1.5 mW (typical)
  • Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The ICL7109CPL+2 features a total of 40 pins, each serving a specific function. The pin configuration is as follows:

  1. VREF-
  2. VREF+
  3. AGND
  4. REFOUT
  5. REFLO
  6. REFHI
  7. INLO
  8. INHI
  9. INCOM
  10. VIN-
  11. VIN+
  12. VDD
  13. DGND
  14. OSCIN
  15. OSCOUT
  16. CLK
  17. STBY
  18. BUSY
  19. D0
  20. D1
  21. D2
  22. D3
  23. D4
  24. D5
  25. D6
  26. D7
  27. D8
  28. D9
  29. D10
  30. D11
  31. D12
  32. CS
  33. WR
  34. RD
  35. A0
  36. A1
  37. A2
  38. A3
  39. A4
  40. A5

Functional Features

The ICL7109CPL+2 offers the following functional features:

  • Analog-to-digital conversion with high accuracy and resolution
  • Internal voltage reference generation
  • Multiplexed input channels
  • Serial interface for data transfer
  • On-chip oscillator for timing control
  • Standby mode for power-saving operation

Advantages and Disadvantages

Advantages

  • High precision measurement capabilities
  • Low power consumption
  • Wide operating voltage range
  • Compact package size

Disadvantages

  • Limited resolution compared to higher-end ADCs
  • Requires external components for proper operation

Working Principles

The ICL7109CPL+2 utilizes a successive approximation technique to convert analog signals into digital data. It employs an internal voltage reference, multiplexed input channels, and an on-chip oscillator to perform accurate measurements.

Detailed Application Field Plans

The ICL7109CPL+2 finds applications in various fields that require precise analog-to-digital conversion. Some of the detailed application field plans include:

  1. Industrial automation systems
  2. Medical equipment
  3. Scientific instruments
  4. Data acquisition systems
  5. Process control devices

Detailed and Complete Alternative Models

  1. ICL7109CPL
  2. ICL7109CPL+1
  3. ICL7109CPL+3
  4. ICL7109CPL+4
  5. ICL7109CPL+5

These alternative models offer similar functionality and characteristics to the ICL7109CPL+2, providing options for different requirements and specifications.

In conclusion, the ICL7109CPL+2 is a highly accurate and low-power integrated circuit used for analog-to-digital conversion. Its compact package size and wide operating voltage range make it suitable for various applications in different fields.

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací ICL7109CPL+2 v technických řešeních

  1. Question: What is the ICL7109CPL+2?
    Answer: The ICL7109CPL+2 is an integrated circuit (IC) that serves as a precision analog-to-digital converter (ADC) and digital-to-analog converter (DAC) in technical solutions.

  2. Question: What is the operating voltage range of the ICL7109CPL+2?
    Answer: The ICL7109CPL+2 operates within a voltage range of 4.5V to 6.5V.

  3. Question: What is the resolution of the ADC in the ICL7109CPL+2?
    Answer: The ADC in the ICL7109CPL+2 has a resolution of 12 bits.

  4. Question: Can the ICL7109CPL+2 be used for temperature measurement?
    Answer: Yes, the ICL7109CPL+2 can be used for temperature measurement by interfacing it with appropriate temperature sensors.

  5. Question: Does the ICL7109CPL+2 require external components for operation?
    Answer: Yes, the ICL7109CPL+2 requires external components such as resistors, capacitors, and reference voltage sources for proper operation.

  6. Question: What is the maximum sampling rate of the ADC in the ICL7109CPL+2?
    Answer: The maximum sampling rate of the ADC in the ICL7109CPL+2 is typically around 40 samples per second.

  7. Question: Can the ICL7109CPL+2 be used in battery-powered applications?
    Answer: Yes, the ICL7109CPL+2 can be used in battery-powered applications as it operates within a low voltage range and has low power consumption.

  8. Question: Is the ICL7109CPL+2 suitable for high-precision measurements?
    Answer: Yes, the ICL7109CPL+2 is suitable for high-precision measurements due to its 12-bit resolution and built-in calibration features.

  9. Question: Can the ICL7109CPL+2 be used in industrial control systems?
    Answer: Yes, the ICL7109CPL+2 can be used in industrial control systems for various measurement and control applications.

  10. Question: Are there any application notes or reference designs available for the ICL7109CPL+2?
    Answer: Yes, Intersil (now Renesas Electronics) provides application notes and reference designs that can help users implement the ICL7109CPL+2 in their technical solutions.