Maxim Integrated
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
DS1077LZ-66
Zobrazit detail DataSheets

DS1077LZ-66

Product Overview

Category

The DS1077LZ-66 belongs to the category of integrated circuits (ICs).

Use

It is primarily used as a programmable oscillator in electronic devices.

Characteristics

  • Programmable frequency range
  • Low power consumption
  • Wide operating voltage range
  • High accuracy and stability
  • Compact package size

Package

The DS1077LZ-66 is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of the DS1077LZ-66 lies in its ability to generate precise clock signals for various applications.

Packaging/Quantity

This product is typically sold in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Frequency Range: 1Hz to 133MHz
  • Supply Voltage Range: 2.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Output Type: Square wave
  • Programmable via I2C interface

Detailed Pin Configuration

The DS1077LZ-66 has a total of 8 pins, which are assigned specific functions:

  1. VCC - Power supply input
  2. GND - Ground reference
  3. SDA - Serial data input/output for I2C communication
  4. SCL - Serial clock input for I2C communication
  5. NC - No connection
  6. OUT - Output pin for the generated clock signal
  7. GND - Ground reference
  8. VCC - Power supply input

Functional Features

  • Programmable frequency allows flexibility in generating clock signals.
  • I2C interface enables easy configuration and control.
  • Wide operating voltage range ensures compatibility with different systems.
  • Low power consumption makes it suitable for battery-powered devices.
  • High accuracy and stability ensure reliable timing for various applications.

Advantages and Disadvantages

Advantages

  • Wide frequency range caters to diverse application needs.
  • Programmability allows customization according to specific requirements.
  • Compact package size saves board space.
  • Low power consumption prolongs battery life.
  • High accuracy ensures precise timing.

Disadvantages

  • Limited output options (only square wave).
  • Requires I2C interface for programming, which may add complexity to the design.

Working Principles

The DS1077LZ-66 utilizes an internal oscillator circuit that generates clock signals based on the programmed frequency. The I2C interface enables users to configure the desired frequency by sending appropriate commands. The oscillator circuit then produces a square wave output signal with the specified frequency.

Detailed Application Field Plans

The DS1077LZ-66 finds applications in various fields, including:

  1. Communication systems: Provides accurate timing for data transmission and synchronization.
  2. Consumer electronics: Used in devices such as TVs, DVD players, and audio systems for precise timing control.
  3. Industrial automation: Enables synchronized operation of machinery and equipment.
  4. Medical devices: Ensures accurate timing for medical equipment and monitoring systems.
  5. Automotive electronics: Used in vehicle control systems for timing critical operations.

Detailed and Complete Alternative Models

  1. DS1077LU-66: Similar to DS1077LZ-66 but available in a different package (µSOP).
  2. DS1077LS-66: Same functionality as DS1077LZ-66 but operates at extended temperature range (-40°C to +125°C).
  3. DS1077LE-66: Enhanced version with additional features like frequency modulation and spread spectrum capability.

These alternative models offer similar programmable oscillator functionality with slight variations in package type, temperature range, or additional features.

Word count: 518 words

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací DS1077LZ-66 v technických řešeních

Sure! Here are 10 common questions and answers related to the application of DS1077LZ-66 in technical solutions:

  1. Q: What is DS1077LZ-66? A: DS1077LZ-66 is a programmable oscillator IC (Integrated Circuit) that generates precise clock signals.

  2. Q: What is the operating voltage range of DS1077LZ-66? A: The operating voltage range of DS1077LZ-66 is typically between 2.7V and 5.5V.

  3. Q: How accurate is the clock signal generated by DS1077LZ-66? A: DS1077LZ-66 provides high accuracy with a frequency stability of ±50ppm (parts per million).

  4. Q: Can DS1077LZ-66 generate multiple clock frequencies simultaneously? A: Yes, DS1077LZ-66 can generate up to three different clock frequencies simultaneously using its three independent outputs.

  5. Q: Is DS1077LZ-66 programmable? A: Yes, DS1077LZ-66 is programmable through an I2C interface, allowing users to set the desired clock frequency.

  6. Q: What is the maximum clock frequency that DS1077LZ-66 can generate? A: DS1077LZ-66 can generate clock frequencies up to 66.6MHz.

  7. Q: Can DS1077LZ-66 be used as a clock source for microcontrollers or digital circuits? A: Yes, DS1077LZ-66 is commonly used as a clock source for various digital applications, including microcontrollers and digital circuits.

  8. Q: Does DS1077LZ-66 have any built-in features for clock synchronization? A: Yes, DS1077LZ-66 supports a synchronization pin that allows precise synchronization of multiple devices.

  9. Q: Can DS1077LZ-66 operate in harsh environments? A: DS1077LZ-66 is designed to operate in industrial temperature ranges (-40°C to +85°C), making it suitable for harsh environments.

  10. Q: Are there any application notes or reference designs available for DS1077LZ-66? A: Yes, the manufacturer provides application notes and reference designs that can help users integrate DS1077LZ-66 into their technical solutions.

Please note that these answers are general and may vary depending on the specific requirements and use cases. It's always recommended to refer to the datasheet and documentation provided by the manufacturer for accurate information.