Littelfuse Inc.
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
1.5SMC11
Zobrazit detail DataSheets

1.5SMC11

Product Overview

Category: Electronic Component
Use: Surge Protection
Characteristics: High surge current capability, fast response time
Package: SMC (DO-214AB)
Essence: Protects electronic devices from voltage surges
Packaging/Quantity: Tape & Reel, 1000 units per reel

Specifications

  • Peak Pulse Power: 1500W
  • Breakdown Voltage: 10.5V to 12.8V
  • Operating Temperature: -55°C to +150°C
  • Mounting Type: Surface Mount

Detailed Pin Configuration

  1. Anode
  2. Cathode

Functional Features

  • Fast response time
  • Low clamping voltage
  • High surge current capability

Advantages and Disadvantages

Advantages: - Provides effective protection against voltage surges - Fast response time helps in preventing damage to sensitive electronics

Disadvantages: - May require additional circuitry for comprehensive surge protection

Working Principles

1.5SMC11 operates by diverting excess voltage away from the protected device when a surge occurs, thereby safeguarding it from damage.

Detailed Application Field Plans

  1. Telecommunications equipment
  2. Industrial automation systems
  3. Consumer electronics

Detailed and Complete Alternative Models

  1. SMAJ11A
  2. SMBJ11CA
  3. SMLJ11CA

This information provides a comprehensive overview of the 1.5SMC11 surge protection component, covering its product details, specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací 1.5SMC11 v technických řešeních

  1. What is 1.5SMC11 and its application in technical solutions?

    • 1.5SMC11 is a type of transient voltage suppressor diode used to protect electronic circuits from overvoltage transients. It is commonly applied in technical solutions to safeguard sensitive components from voltage spikes.

  2. How does 1.5SMC11 provide protection against overvoltage transients?

    • 1.5SMC11 operates by clamping the voltage to a safe level when an overvoltage transient occurs, diverting excess current away from the protected circuit.

  3. What are the key specifications of 1.5SMC11 that make it suitable for technical solutions?

    • The 1.5SMC11 typically has a peak power dissipation, breakdown voltage, and low clamping voltage, making it well-suited for protecting electronic equipment from transient voltage events.

  4. In what applications is 1.5SMC11 commonly used within technical solutions?

    • 1.5SMC11 is frequently employed in power supplies, communication systems, automotive electronics, industrial equipment, and other applications where protection against voltage surges is critical.

  5. How does 1.5SMC11 compare to other transient voltage suppressors in terms of performance and reliability?

    • 1.5SMC11 offers high surge capability, low leakage current, and fast response time, making it a reliable choice for transient voltage protection in various technical solutions.

  6. What are the best practices for integrating 1.5SMC11 into a technical solution for optimal protection?

    • Proper PCB layout, adequate thermal management, and ensuring proper grounding are essential for maximizing the effectiveness of 1.5SMC11 in providing protection against overvoltage transients.

  7. Are there any limitations or considerations to keep in mind when using 1.5SMC11 in technical solutions?

    • While 1.5SMC11 provides effective transient voltage protection, it is important to consider its clamping voltage, response time, and potential thermal issues when designing for specific applications.

  8. What are the failure modes of 1.5SMC11, and how can they be mitigated in technical solutions?

    • Failure modes such as thermal runaway, excessive leakage current, and mechanical damage can be mitigated through proper selection, installation, and monitoring of 1.5SMC11 devices.

  9. Can 1.5SMC11 be used in conjunction with other protective components in technical solutions?

    • Yes, 1.5SMC11 can be integrated with varistors, gas discharge tubes, and other protective devices to create comprehensive transient voltage protection schemes for complex technical solutions.

  10. What are the industry standards and certifications relevant to the use of 1.5SMC11 in technical solutions?

    • Compliance with standards such as IEC 61000-4-5 and UL 1449 may be applicable, depending on the specific application and regulatory requirements for transient voltage suppression in technical solutions.