Viz Specifikace pro podrobnosti o produktu.
LTC3872EDDB#TRPBF
Product Overview
Category
The LTC3872EDDB#TRPBF belongs to the category of integrated circuits (ICs) specifically designed for power management applications.
Use
This IC is commonly used in various electronic devices and systems to efficiently regulate and control power supply voltages.
Characteristics
- High efficiency: The LTC3872EDDB#TRPBF offers high conversion efficiency, minimizing power losses during voltage regulation.
- Wide input voltage range: It can handle a wide range of input voltages, making it suitable for diverse applications.
- Fast transient response: This IC provides quick and accurate response to sudden changes in load conditions.
- Low quiescent current: It consumes minimal power when in standby or idle mode, enhancing overall energy efficiency.
Package
The LTC3872EDDB#TRPBF is available in a compact and robust DFN (Dual Flat No-Lead) package. This package ensures reliable performance and ease of integration into various circuit designs.
Essence
The essence of the LTC3872EDDB#TRPBF lies in its ability to efficiently regulate power supply voltages, ensuring stable and reliable operation of electronic devices.
Packaging/Quantity
This IC is typically supplied in tape and reel packaging, with a quantity of 2500 units per reel.
Specifications
- Input Voltage Range: 4V to 38V
- Output Voltage Range: 0.8V to 5.5V
- Maximum Output Current: 20A
- Switching Frequency: Up to 1MHz
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
The LTC3872EDDB#TRPBF features a total of 16 pins, each serving a specific function. The pin configuration is as follows:
- VIN: Input voltage pin
- PGND: Power ground pin
- SW1: Switching node 1
- SW2: Switching node 2
- VOUT: Output voltage pin
- FB: Feedback pin for voltage regulation
- SS: Soft-start pin for gradual power-up
- SYNC: Synchronization pin for external clock input
- RT/CLKOUT: External resistor or clock output pin
- CLKIN: Clock input pin
- GND: Ground pin
- VCC: Supply voltage pin
- PGOOD: Power good indicator pin
- EN: Enable pin for turning the IC on/off
- OCSET: Overcurrent protection threshold setting pin
- SS/TRK: Soft-start/tracking pin
Functional Features
- Voltage Regulation: The LTC3872EDDB#TRPBF provides precise and stable voltage regulation, ensuring consistent power supply to connected devices.
- Current Limiting: It incorporates overcurrent protection, preventing excessive current flow and safeguarding the circuitry.
- Soft-Start Function: The soft-start feature allows for a gradual increase in output voltage during power-up, reducing stress on components.
- Synchronization Capability: The IC can synchronize its switching frequency with an external clock signal, enabling coordination with other system components.
Advantages and Disadvantages
Advantages
- High efficiency leads to reduced power consumption and heat generation.
- Wide input voltage range enables compatibility with various power sources.
- Fast transient response ensures stability during load changes.
- Compact package facilitates space-saving integration into designs.
Disadvantages
- Limited maximum output current may restrict usage in high-power applications.
- Requires careful consideration of external components for optimal performance.
Working Principles
The LTC3872EDDB#TRPBF operates based on a pulse-width modulation (PWM) control scheme. It utilizes an internal power MOSFET to regulate the output voltage. The feedback mechanism continuously compares the actual output voltage with a reference voltage, adjusting the duty cycle of the PWM signal to maintain the desired output voltage.
Detailed Application Field Plans
The LTC3872EDDB#TRPBF finds applications in various fields, including but not limited to: - Industrial automation systems - Telecommunications equipment - Automotive electronics - Power supply units - Battery charging systems
Detailed and Complete Alternative Models
- LTC3872EDDB: Similar to LTC3872EDDB#TRPBF, but without tape and reel packaging.
- LTC3872IDDB#TRPBF: A variant with different pin configuration but similar functionality.
- LTC3872HEDDB#TRPBF: Higher current handling capability compared to LTC3872EDDB#TRPBF.
These alternative models offer similar features and can be considered as substitutes based on specific requirements.
Word count: 610 words
Seznam 10 běžných otázek a odpovědí souvisejících s aplikací LTC3872EDDB#TRPBF v technických řešeních
Sure! Here are 10 common questions and answers related to the application of LTC3872EDDB#TRPBF in technical solutions:
Q: What is LTC3872EDDB#TRPBF? A: LTC3872EDDB#TRPBF is a specific model of a synchronous step-down DC/DC controller IC manufactured by Linear Technology (now part of Analog Devices). It is designed for use in various power management applications.
Q: What is the input voltage range supported by LTC3872EDDB#TRPBF? A: The input voltage range supported by LTC3872EDDB#TRPBF is typically between 4.5V and 38V.
Q: What is the output voltage range that can be achieved using LTC3872EDDB#TRPBF? A: The output voltage range achievable with LTC3872EDDB#TRPBF depends on the external components used, but it can typically range from 0.6V to 5.5V.
Q: What is the maximum output current that LTC3872EDDB#TRPBF can handle? A: LTC3872EDDB#TRPBF can handle a maximum output current of up to 25A, depending on the design and thermal considerations.
Q: Does LTC3872EDDB#TRPBF support synchronous rectification? A: Yes, LTC3872EDDB#TRPBF supports synchronous rectification, which improves efficiency by reducing power losses.
Q: Can LTC3872EDDB#TRPBF operate in a wide temperature range? A: Yes, LTC3872EDDB#TRPBF is designed to operate in a wide temperature range, typically from -40°C to 125°C.
Q: What are the key features of LTC3872EDDB#TRPBF? A: Some key features of LTC3872EDDB#TRPBF include adjustable frequency operation, programmable soft-start, overcurrent protection, and thermal shutdown.
Q: Is LTC3872EDDB#TRPBF suitable for automotive applications? A: Yes, LTC3872EDDB#TRPBF is suitable for automotive applications as it meets the necessary requirements such as AEC-Q100 qualification and operates reliably in automotive environments.
Q: Can LTC3872EDDB#TRPBF be used in battery-powered systems? A: Yes, LTC3872EDDB#TRPBF can be used in battery-powered systems as it supports a wide input voltage range and offers efficient power conversion.
Q: Are there any evaluation boards or reference designs available for LTC3872EDDB#TRPBF? A: Yes, Analog Devices provides evaluation boards and reference designs for LTC3872EDDB#TRPBF, which can help users quickly prototype and evaluate their power management solutions.
Please note that the answers provided here are general and may vary depending on specific design considerations and application requirements. It is always recommended to refer to the datasheet and application notes provided by the manufacturer for detailed information.