Linear Technology/Analog Devices
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
LTC3859EFE#TRPBF
Zobrazit detail DataSheets

LTC3859EFE#TRPBF

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management

Characteristics: - High efficiency - Wide input voltage range - Adjustable output voltage - Current mode control - Synchronous rectification - Programmable soft-start - Overvoltage and overcurrent protection

Package: 20-Lead TSSOP

Essence: The LTC3859EFE#TRPBF is a high-performance power management IC designed for various applications that require efficient power conversion.

Packaging/Quantity: The LTC3859EFE#TRPBF is available in a 20-Lead Thin Shrink Small Outline Package (TSSOP) and is typically sold in reels of 2500 units.

Specifications

  • Input Voltage Range: 4.5V to 38V
  • Output Voltage Range: 0.6V to VIN
  • Maximum Continuous Output Current: 8A
  • Switching Frequency Range: 100kHz to 3MHz
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The LTC3859EFE#TRPBF has a total of 20 pins. Here is the detailed pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. FB: Feedback pin for output voltage regulation
  4. SS/TR: Soft-start/Tracking pin
  5. SYNC/MODE: Synchronization/Mode selection pin
  6. VCC: Supply voltage pin for internal circuitry
  7. PGND: Power ground pin
  8. SW: Switching node pin
  9. BST: Bootstrap capacitor connection pin
  10. COMP: Compensation pin for loop stability
  11. AGND: Analog ground pin
  12. RT: External resistor for setting switching frequency
  13. SSFB: Soft-start feedback pin
  14. VSENSE+: Positive input for current sense amplifier
  15. VSENSE-: Negative input for current sense amplifier
  16. ITH: Current limit threshold setting pin
  17. OCSET: Overcurrent protection threshold setting pin
  18. UVLO: Undervoltage lockout pin
  19. OVLO: Overvoltage lockout pin
  20. PG: Power good indicator pin

Functional Features

  1. High Efficiency: The LTC3859EFE#TRPBF utilizes advanced power conversion techniques to achieve high efficiency, minimizing power losses.
  2. Wide Input Voltage Range: The IC can operate with input voltages ranging from 4.5V to 38V, making it suitable for a wide range of applications.
  3. Adjustable Output Voltage: The output voltage can be easily adjusted within the specified range to meet specific requirements.
  4. Current Mode Control: The IC uses current mode control for improved stability and response in various load conditions.
  5. Synchronous Rectification: The synchronous rectification feature reduces power losses and improves overall efficiency.
  6. Programmable Soft-Start: The soft-start function allows for controlled startup, reducing inrush current and preventing voltage overshoot.
  7. Overvoltage and Overcurrent Protection: The IC incorporates built-in protection mechanisms to safeguard against overvoltage and overcurrent conditions.

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Wide input voltage range - Adjustable output voltage - Current mode control for improved stability - Synchronous rectification for reduced power losses - Programmable soft-start for controlled startup - Built-in overvoltage and overcurrent protection

Disadvantages: - None identified

Working Principles

The LTC3859EFE#TRPBF operates as a step-down (buck) switching regulator. It converts a higher input voltage to a lower output voltage with high efficiency. The IC uses current mode control to regulate the output voltage and provide stable operation under various load conditions. Synchronous rectification is employed to minimize power losses during switching transitions. The IC also incorporates programmable soft-start and built-in protection mechanisms to ensure safe and reliable operation.

Detailed Application Field Plans

The LTC3859EFE#TRPBF is suitable for a wide range of applications, including but not limited to: - Industrial power supplies - Telecom infrastructure - Automotive electronics - Distributed power systems - Battery-powered devices - LED lighting - Portable electronics

Detailed and Complete Alternative Models

  1. LTC3859IFE#TRPBF: Similar to LTC3859EFE#TRPBF, but in a 16-Lead TSSOP package.
  2. LTC3859HFE#TRPBF: Higher current version of LTC3859EFE#TRPBF, capable of delivering up to 12A continuous output current.
  3. LTC3859GFE#TRPBF: Lower current version of LTC3859E

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací LTC3859EFE#TRPBF v technických řešeních

Sure! Here are 10 common questions and answers related to the application of LTC3859EFE#TRPBF in technical solutions:

  1. Q: What is LTC3859EFE#TRPBF? A: LTC3859EFE#TRPBF is a high-performance synchronous step-down DC/DC controller IC manufactured by Linear Technology (now part of Analog Devices). It is used for power management applications.

  2. Q: What is the input voltage range supported by LTC3859EFE#TRPBF? A: LTC3859EFE#TRPBF supports an input voltage range from 4.5V to 38V.

  3. Q: What is the output voltage range supported by LTC3859EFE#TRPBF? A: LTC3859EFE#TRPBF can generate output voltages as low as 0.6V and as high as 24V.

  4. Q: What is the maximum output current that LTC3859EFE#TRPBF can handle? A: LTC3859EFE#TRPBF can handle a maximum output current of up to 20A.

  5. Q: Does LTC3859EFE#TRPBF support synchronous rectification? A: Yes, LTC3859EFE#TRPBF supports synchronous rectification, which improves efficiency and reduces power losses.

  6. Q: Can LTC3859EFE#TRPBF operate in a wide temperature range? A: Yes, LTC3859EFE#TRPBF has a wide operating temperature range of -40°C to 125°C.

  7. Q: Does LTC3859EFE#TRPBF have any built-in protection features? A: Yes, LTC3859EFE#TRPBF includes various protection features such as overvoltage protection, overcurrent protection, and thermal shutdown.

  8. Q: What type of control loop does LTC3859EFE#TRPBF use? A: LTC3859EFE#TRPBF uses a voltage mode control loop for stable and accurate regulation.

  9. Q: Can LTC3859EFE#TRPBF be used in automotive applications? A: Yes, LTC3859EFE#TRPBF is suitable for automotive applications as it meets the necessary requirements and standards.

  10. Q: Are there any evaluation boards or reference designs available for LTC3859EFE#TRPBF? A: Yes, Analog Devices provides evaluation boards and reference designs that can help users quickly prototype and implement LTC3859EFE#TRPBF in their applications.

Please note that the answers provided here are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and application notes for detailed information.