Viz Specifikace pro podrobnosti o produktu.
LTC3708EUH#PBF
Product Overview
Category
LTC3708EUH#PBF belongs to the category of integrated circuits (ICs).
Use
This product is commonly used in power management applications.
Characteristics
- High efficiency
- Wide input voltage range
- Adjustable output voltage
- Current mode control
- Synchronous rectification
- Overcurrent protection
- Thermal shutdown
Package
LTC3708EUH#PBF is available in a 28-pin QFN package.
Essence
The essence of this product lies in its ability to efficiently regulate and control power in various electronic devices.
Packaging/Quantity
LTC3708EUH#PBF is typically packaged in reels, with each reel containing a specific quantity of units. The exact quantity may vary depending on the manufacturer's specifications.
Specifications
- Input Voltage Range: 4V to 36V
- Output Voltage Range: 0.6V to 34V
- Switching Frequency: Up to 2MHz
- Maximum Output Current: 3A
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
- VIN: Input voltage pin
- GND: Ground pin
- FB: Feedback pin for output voltage regulation
- SS: Soft-start pin for controlling startup time
- SYNC: Synchronization pin for external clock synchronization
- VCC: Supply voltage pin for internal circuitry
- PGND: Power ground pin
- SW: Switching node pin for connecting the inductor
- BST: Boost pin for driving the high-side MOSFET
- COMP: Compensation pin for loop stability
- EN: Enable pin for turning the device on/off
- RT: Timing resistor pin for setting switching frequency
- SS/TR: Soft-start/tracking pin for controlling startup time or tracking an external voltage
- VFB: Feedback voltage sense pin
- AGND: Analog ground pin
- PGND: Power ground pin
- SW: Switching node pin for connecting the inductor
- BST: Boost pin for driving the high-side MOSFET
- COMP: Compensation pin for loop stability
- EN: Enable pin for turning the device on/off
- RT: Timing resistor pin for setting switching frequency
- SS/TR: Soft-start/tracking pin for controlling startup time or tracking an external voltage
- VFB: Feedback voltage sense pin
- AGND: Analog ground pin
- PGND: Power ground pin
- SW: Switching node pin for connecting the inductor
- BST: Boost pin for driving the high-side MOSFET
- COMP: Compensation pin for loop stability
Functional Features
- High efficiency power conversion
- Wide input voltage range for versatile applications
- Adjustable output voltage to meet specific requirements
- Current mode control for improved stability and response
- Synchronous rectification for reduced power losses
- Overcurrent protection to safeguard the circuitry
- Thermal shutdown to prevent overheating
Advantages and Disadvantages
Advantages
- High efficiency leads to energy savings
- Wide input voltage range allows compatibility with various power sources
- Adjustable output voltage provides flexibility
- Current mode control enhances stability and response
- Synchronous rectification reduces power losses
Disadvantages
- Limited maximum output current (3A)
- Operating temperature range may not be suitable for extreme environments
Working Principles
LTC3708EUH#PBF operates based on a current mode control architecture. It regulates the output voltage by adjusting the duty cycle of the internal switch. The feedback voltage is compared to a reference voltage, and any deviation triggers the necessary adjustments. Synchronous rectification improves efficiency by reducing power losses during switching.
Detailed Application Field Plans
LTC3708EUH#PBF finds applications in various fields, including: - Industrial automation - Telecommunications - Automotive electronics - Renewable energy systems - Consumer electronics
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to LTC3708EUH#PBF are: - LT8610ABEUJ#PBF - LT8645SEV#PBF - LT3757EMSE#PBF - LT8609SIV#PBF - LT8614EMSE#PBF
These models can be considered as alternatives based on specific requirements and compatibility with the application.
Word count: 579 words
Seznam 10 běžných otázek a odpovědí souvisejících s aplikací LTC3708EUH#PBF v technických řešeních
Sure! Here are 10 common questions and answers related to the application of LTC3708EUH#PBF in technical solutions:
Q: What is LTC3708EUH#PBF? A: LTC3708EUH#PBF is a high-performance synchronous step-down DC-DC converter manufactured by Linear Technology (now part of Analog Devices). It is commonly used in various technical solutions.
Q: What is the input voltage range of LTC3708EUH#PBF? A: The input voltage range of LTC3708EUH#PBF is typically between 4.5V and 36V.
Q: What is the output voltage range of LTC3708EUH#PBF? A: The output voltage range of LTC3708EUH#PBF can be adjusted from 0.6V to VIN, where VIN is the input voltage.
Q: What is the maximum output current of LTC3708EUH#PBF? A: The maximum output current of LTC3708EUH#PBF depends on the specific design and external components used. It can support currents up to several amps.
Q: Can LTC3708EUH#PBF operate in a wide temperature range? A: Yes, LTC3708EUH#PBF is designed to operate in a wide temperature range, typically from -40°C to 125°C.
Q: Does LTC3708EUH#PBF require an external compensation network? A: Yes, LTC3708EUH#PBF requires an external compensation network to stabilize the control loop and ensure proper operation.
Q: Can LTC3708EUH#PBF be used in battery-powered applications? A: Yes, LTC3708EUH#PBF can be used in battery-powered applications as it supports a wide input voltage range and efficient power conversion.
Q: Does LTC3708EUH#PBF have built-in protection features? A: Yes, LTC3708EUH#PBF includes various protection features such as overvoltage protection, overcurrent protection, and thermal shutdown.
Q: Can LTC3708EUH#PBF be synchronized to an external clock? A: Yes, LTC3708EUH#PBF provides the option to synchronize its switching frequency to an external clock for better system integration.
Q: Are there any evaluation boards or reference designs available for LTC3708EUH#PBF? A: Yes, Analog Devices provides evaluation boards and reference designs for LTC3708EUH#PBF, which can help users quickly prototype and implement their technical solutions.
Please note that the answers provided here are general and may vary depending on the specific application and design considerations. It is always recommended to refer to the datasheet and application notes for detailed information.