LTC1530CS8-2.5#PBF

Introduction

The LTC1530CS8-2.5#PBF is a voltage regulator integrated circuit belonging to the category of power management ICs. This device is designed to provide a stable and regulated output voltage for various electronic applications.

Basic Information Overview

Category: Power Management IC
Use: Voltage regulation
Characteristics: High efficiency, low dropout voltage
Package: 8-pin SOIC
Essence: Regulating input voltage to a stable output voltage
Packaging/Quantity: Available in tape and reel packaging

Specifications

Output Voltage: 2.5V
Input Voltage Range: 2.7V to 7V
Maximum Output Current: 60mA
Dropout Voltage: 300mV at 60mA load
Quiescent Current: 40µA
Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

VIN (Pin 1) - Input voltage
GND (Pin 2) - Ground
FB (Pin 3) - Feedback pin
SHDN (Pin 4) - Shutdown control
VOUT (Pin 5) - Output voltage
NC (Pin 6) - No connection
NC (Pin 7) - No connection
NC (Pin 8) - No connection

Functional Features

Low dropout voltage for extended battery life
Low quiescent current for improved efficiency
Shutdown mode for power conservation
Overcurrent and overtemperature protection

Advantages and Disadvantages

Advantages: - High efficiency - Wide input voltage range - Compact package size

Disadvantages: - Limited maximum output current - Sensitive to external noise and fluctuations

Working Principles

The LTC1530CS8-2.5#PBF utilizes a feedback mechanism to regulate the output voltage based on the reference voltage. It employs a series pass P-channel MOSFET to achieve low dropout voltage and efficient voltage regulation.

Detailed Application Field Plans

This voltage regulator IC is suitable for various battery-powered applications such as portable devices, IoT sensors, and handheld instruments. It can also be used in low-power microcontroller systems and energy harvesting applications.

Detailed and Complete Alternative Models

LT1763
LT1963
LM2937
MIC5205

In conclusion, the LTC1530CS8-2.5#PBF is a versatile voltage regulator IC with high efficiency and a wide input voltage range, making it suitable for a range of low-power electronic applications.

Word Count: 345

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací LTC1530CS8-2.5#PBF v technických řešeních

What is the LTC1530CS8-2.5#PBF?
- The LTC1530CS8-2.5#PBF is a high efficiency, low noise step-up DC/DC converter designed to provide a regulated output voltage from a single cell Li-Ion battery.
What is the input voltage range for LTC1530CS8-2.5#PBF?
- The input voltage range for LTC1530CS8-2.5#PBF is typically 0.7V to 3.3V.
What is the output voltage of LTC1530CS8-2.5#PBF?
- The output voltage of LTC1530CS8-2.5#PBF is fixed at 2.5V.
What is the maximum output current of LTC1530CS8-2.5#PBF?
- The maximum output current of LTC1530CS8-2.5#PBF is typically 60mA.
What are the typical applications of LTC1530CS8-2.5#PBF?
- LTC1530CS8-2.5#PBF is commonly used in battery-powered applications such as portable instruments, remote sensors, and energy harvesting systems.
What is the efficiency of LTC1530CS8-2.5#PBF?
- The efficiency of LTC1530CS8-2.5#PBF can reach up to 90% depending on the input and output conditions.
Does LTC1530CS8-2.5#PBF require external components for operation?
- Yes, LTC1530CS8-2.5#PBF requires external components such as an inductor, diode, and capacitors for proper operation.
Is LTC1530CS8-2.5#PBF suitable for low power applications?
- Yes, LTC1530CS8-2.5#PBF is suitable for low power applications due to its low quiescent current and high efficiency.
What are the key features of LTC1530CS8-2.5#PBF?
- The key features of LTC1530CS8-2.5#PBF include low shutdown current, low noise, and short-circuit protection.
Where can I find the detailed datasheet for LTC1530CS8-2.5#PBF?
- The detailed datasheet for LTC1530CS8-2.5#PBF can be found on the manufacturer's website or through authorized distributors.