Viz Specifikace pro podrobnosti o produktu.
LT3065MPMSE-1.2#TRPBF
Product Overview
Category
LT3065MPMSE-1.2#TRPBF belongs to the category of voltage regulators.
Use
This product is primarily used for regulating voltage in electronic circuits.
Characteristics
- Voltage regulation capability
- High efficiency
- Low dropout voltage
- Low output noise
- Thermal shutdown protection
Package
The LT3065MPMSE-1.2#TRPBF comes in a small surface-mount package.
Essence
The essence of this product lies in its ability to provide stable and regulated voltage output, ensuring reliable operation of electronic devices.
Packaging/Quantity
The LT3065MPMSE-1.2#TRPBF is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
Specifications
- Input Voltage Range: 1.8V to 45V
- Output Voltage: 1.2V
- Maximum Output Current: 500mA
- Dropout Voltage: 300mV
- Line Regulation: ±0.02%
- Load Regulation: ±0.05%
- Quiescent Current: 30μA
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
The LT3065MPMSE-1.2#TRPBF has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
Functional Features
- Wide input voltage range allows for versatile applications.
- Low dropout voltage enables efficient power conversion.
- Excellent line and load regulation ensures stable output voltage.
- Thermal shutdown protection prevents damage due to excessive temperature.
Advantages and Disadvantages
Advantages
- High efficiency results in minimal power dissipation.
- Low output noise ensures clean power supply for sensitive circuits.
- Small package size allows for space-saving designs.
- Wide operating temperature range enables usage in various environments.
Disadvantages
- Limited maximum output current may restrict certain high-power applications.
- Higher cost compared to some alternative models.
Working Principles
The LT3065MPMSE-1.2#TRPBF operates based on a voltage regulation principle. It takes an input voltage within the specified range and provides a stable 1.2V output voltage, regardless of variations in the input voltage or load conditions. This is achieved through internal circuitry that adjusts the output voltage based on feedback from the load.
Detailed Application Field Plans
The LT3065MPMSE-1.2#TRPBF finds application in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable electronics - Industrial control systems - Automotive electronics - Communication equipment
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to the LT3065MPMSE-1.2#TRPBF include: - LM1117-1.2 - ADP3339-1.2 - TPS73601-1.2
These models can be considered as alternatives depending on specific requirements and design constraints.
In conclusion, the LT3065MPMSE-1.2#TRPBF is a voltage regulator with excellent characteristics, such as high efficiency, low dropout voltage, and thermal shutdown protection. Its wide application field and availability of alternative models make it a versatile choice for voltage regulation in various electronic systems.
Seznam 10 běžných otázek a odpovědí souvisejících s aplikací LT3065MPMSE-1.2#TRPBF v technických řešeních
Sure! Here are 10 common questions and answers related to the application of LT3065MPMSE-1.2#TRPBF in technical solutions:
Q1: What is the LT3065MPMSE-1.2#TRPBF? A1: The LT3065MPMSE-1.2#TRPBF is a low dropout (LDO) linear regulator IC that provides a fixed output voltage of 1.2V.
Q2: What is the input voltage range for the LT3065MPMSE-1.2#TRPBF? A2: The input voltage range for the LT3065MPMSE-1.2#TRPBF is from 1.8V to 45V.
Q3: What is the maximum output current of the LT3065MPMSE-1.2#TRPBF? A3: The LT3065MPMSE-1.2#TRPBF can provide a maximum output current of 500mA.
Q4: What are the typical applications of the LT3065MPMSE-1.2#TRPBF? A4: The LT3065MPMSE-1.2#TRPBF is commonly used in battery-powered devices, industrial control systems, instrumentation, and other low voltage applications.
Q5: Does the LT3065MPMSE-1.2#TRPBF require any external components? A5: Yes, the LT3065MPMSE-1.2#TRPBF requires a few external components such as input and output capacitors for stability.
Q6: Can the LT3065MPMSE-1.2#TRPBF operate in a wide temperature range? A6: Yes, the LT3065MPMSE-1.2#TRPBF can operate in a temperature range of -40°C to 125°C.
Q7: Is the LT3065MPMSE-1.2#TRPBF protected against overcurrent and thermal shutdown? A7: Yes, the LT3065MPMSE-1.2#TRPBF has built-in protection features such as current limit and thermal shutdown.
Q8: Can the LT3065MPMSE-1.2#TRPBF be used in automotive applications? A8: Yes, the LT3065MPMSE-1.2#TRPBF is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.
Q9: What is the package type of the LT3065MPMSE-1.2#TRPBF? A9: The LT3065MPMSE-1.2#TRPBF is available in a small 10-lead MSOP package.
Q10: Can the LT3065MPMSE-1.2#TRPBF be used in parallel to increase the output current? A10: Yes, multiple LT3065MPMSE-1.2#TRPBF regulators can be connected in parallel to increase the total output current capacity.
Please note that these answers are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.