Viz Specifikace pro podrobnosti o produktu.
LT3062MPMS8E#PBF
Product Overview
Category
LT3062MPMS8E#PBF belongs to the category of voltage regulators.
Use
It is commonly used to regulate and stabilize voltage in electronic circuits.
Characteristics
- High precision voltage regulation
- Low dropout voltage
- Low quiescent current
- Thermal shutdown protection
Package
LT3062MPMS8E#PBF comes in an MSOP-8 package.
Essence
The essence of LT3062MPMS8E#PBF is to provide a stable and regulated voltage output for various electronic devices.
Packaging/Quantity
This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
Specifications
- Input Voltage Range: 1.8V to 45V
- Output Voltage Range: 0.6V to 44V
- Dropout Voltage: 300mV at 200mA load
- Quiescent Current: 30μA
- Line Regulation: ±0.02%
- Load Regulation: ±0.1%
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
LT3062MPMS8E#PBF has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- ADJ: Adjustable pin
- VOUT: Output voltage pin
- NC: No connection
- NC: No connection
- NC: No connection
- NC: No connection
Functional Features
- High accuracy voltage regulation
- Low dropout voltage for efficient power conversion
- Low quiescent current for power-saving operation
- Thermal shutdown protection to prevent overheating
Advantages and Disadvantages
Advantages
- Precise voltage regulation
- Wide input and output voltage range
- Low dropout voltage for efficient power conversion
- Low quiescent current for power-saving operation
- Thermal shutdown protection for enhanced safety
Disadvantages
- Limited maximum output current capacity
- Requires external components for proper operation
Working Principles
LT3062MPMS8E#PBF operates by comparing the output voltage with a reference voltage and adjusting the pass transistor to maintain a stable output voltage. It utilizes a feedback mechanism to continuously monitor and regulate the output voltage.
Detailed Application Field Plans
LT3062MPMS8E#PBF finds applications in various electronic devices and systems, including: - Battery-powered devices - Portable electronics - Industrial control systems - Automotive electronics - Communication equipment
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to LT3062MPMS8E#PBF are: - LM317T - LM1117-3.3 - LT1085CT - ADP3339AKCZ-3.3-R7 - TPS7A4700RGWT
These alternative models offer similar functionality and can be used as substitutes depending on specific requirements.
In conclusion, LT3062MPMS8E#PBF is a voltage regulator that provides precise and stable voltage regulation for various electronic devices. Its high accuracy, low dropout voltage, and thermal shutdown protection make it suitable for a wide range of applications. However, it has limitations in terms of maximum output current capacity and requires additional external components for proper operation.
Seznam 10 běžných otázek a odpovědí souvisejících s aplikací LT3062MPMS8E#PBF v technických řešeních
Sure! Here are 10 common questions and answers related to the application of LT3062MPMS8E#PBF in technical solutions:
Q: What is the LT3062MPMS8E#PBF? A: The LT3062MPMS8E#PBF is a low dropout (LDO) linear regulator IC manufactured by Analog Devices.
Q: What is the input voltage range of the LT3062MPMS8E#PBF? A: The LT3062MPMS8E#PBF has an input voltage range of 1.8V to 45V.
Q: What is the output voltage range of the LT3062MPMS8E#PBF? A: The LT3062MPMS8E#PBF can provide an adjustable output voltage range from 0.6V to 45V.
Q: What is the maximum output current of the LT3062MPMS8E#PBF? A: The LT3062MPMS8E#PBF can deliver a maximum output current of 200mA.
Q: What is the dropout voltage of the LT3062MPMS8E#PBF? A: The LT3062MPMS8E#PBF has a very low dropout voltage of typically 300mV at full load.
Q: Is the LT3062MPMS8E#PBF suitable for battery-powered applications? A: Yes, the LT3062MPMS8E#PBF is well-suited for battery-powered applications due to its low dropout voltage and wide input voltage range.
Q: Does the LT3062MPMS8E#PBF have built-in thermal shutdown protection? A: Yes, the LT3062MPMS8E#PBF includes thermal shutdown protection to prevent overheating.
Q: Can the LT3062MPMS8E#PBF be used in automotive applications? A: Yes, the LT3062MPMS8E#PBF is automotive qualified and can be used in automotive applications.
Q: Does the LT3062MPMS8E#PBF require external capacitors for stability? A: Yes, the LT3062MPMS8E#PBF requires input and output capacitors for stability. The datasheet provides recommended values.
Q: What package does the LT3062MPMS8E#PBF come in? A: The LT3062MPMS8E#PBF is available in an 8-lead MSOP package.
Please note that these answers are general and it's always important to refer to the datasheet and application notes for specific design considerations and requirements.