Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
LT3013BEFE#PBF

LT3013BEFE#PBF

Product Overview

Category

LT3013BEFE#PBF belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize voltage in electronic circuits.

Characteristics

  • Low dropout voltage
  • High output current capability
  • Adjustable output voltage
  • Thermal shutdown protection

Package

LT3013BEFE#PBF comes in a TO-220 package.

Essence

The essence of LT3013BEFE#PBF is to provide a stable and regulated voltage supply for electronic devices.

Packaging/Quantity

It is typically packaged in reels or tubes, with a quantity of 1000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.2V to 20V
  • Output Voltage Range: 1.22V to 18V
  • Dropout Voltage: 300mV at 500mA
  • Output Current: Up to 500mA
  • Quiescent Current: 40µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

LT3013BEFE#PBF has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage allows for efficient regulation even when the input voltage is close to the desired output voltage.
  • High output current capability enables it to power a wide range of electronic devices.
  • Adjustable output voltage provides flexibility in various applications.
  • Thermal shutdown protection prevents damage due to excessive heat.

Advantages and Disadvantages

Advantages

  • Low dropout voltage ensures efficient regulation.
  • High output current capability allows for powering demanding devices.
  • Adjustable output voltage provides versatility.
  • Thermal shutdown protection enhances reliability.

Disadvantages

  • Limited output current compared to some other voltage regulators.
  • Higher quiescent current compared to certain low-power regulators.

Working Principles

LT3013BEFE#PBF operates by comparing the output voltage with a reference voltage and adjusting the pass transistor accordingly. It uses feedback control to maintain a stable output voltage despite variations in input voltage and load conditions.

Detailed Application Field Plans

LT3013BEFE#PBF finds applications in various fields, including but not limited to: - Power supply circuits for microcontrollers and digital ICs - Battery-powered devices - Automotive electronics - Industrial control systems - Portable electronic devices

Detailed and Complete Alternative Models

Some alternative models to LT3013BEFE#PBF are: - LM317T - LM1117-ADJ - LT1084CP-ADJ - ADP3339AKCZ-2.5-R7 - TPS7A4700RGWT

These models offer similar functionality and can be used as alternatives depending on specific requirements.

Word count: 346 words

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací LT3013BEFE#PBF v technických řešeních

Sure! Here are 10 common questions and answers related to the application of LT3013BEFE#PBF in technical solutions:

  1. Q: What is the LT3013BEFE#PBF? A: The LT3013BEFE#PBF is a low dropout linear regulator IC manufactured by Analog Devices.

  2. Q: What is the input voltage range of LT3013BEFE#PBF? A: The input voltage range of LT3013BEFE#PBF is from 2.5V to 20V.

  3. Q: What is the output voltage range of LT3013BEFE#PBF? A: The output voltage range of LT3013BEFE#PBF is from 1.22V to 19.5V.

  4. Q: What is the maximum output current of LT3013BEFE#PBF? A: The maximum output current of LT3013BEFE#PBF is 500mA.

  5. Q: What is the dropout voltage of LT3013BEFE#PBF? A: The dropout voltage of LT3013BEFE#PBF is typically 300mV at full load.

  6. Q: Can LT3013BEFE#PBF operate in a wide temperature range? A: Yes, LT3013BEFE#PBF can operate in a temperature range of -40°C to +125°C.

  7. Q: Does LT3013BEFE#PBF have built-in thermal shutdown protection? A: Yes, LT3013BEFE#PBF has built-in thermal shutdown protection to prevent overheating.

  8. Q: Is LT3013BEFE#PBF suitable for battery-powered applications? A: Yes, LT3013BEFE#PBF is suitable for battery-powered applications due to its low quiescent current.

  9. Q: Can LT3013BEFE#PBF be used in automotive applications? A: Yes, LT3013BEFE#PBF is automotive qualified and can be used in automotive applications.

  10. Q: What are some typical applications of LT3013BEFE#PBF? A: Some typical applications of LT3013BEFE#PBF include power supply for sensors, portable devices, industrial equipment, and automotive electronics.

Please note that the answers provided here are general and may vary depending on specific design requirements and conditions. It is always recommended to refer to the datasheet and consult with technical experts for accurate information and application-specific guidance.