Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
LT1376CN8-5#PBF

LT1376CN8-5#PBF

Product Overview

Category

The LT1376CN8-5#PBF belongs to the category of integrated circuits (ICs) and specifically falls under the voltage regulators category.

Use

This product is primarily used for voltage regulation in various electronic devices and systems. It provides a stable output voltage regardless of input voltage fluctuations.

Characteristics

  • Input Voltage Range: 2.7V to 40V
  • Output Voltage: 5V
  • Maximum Output Current: 1.5A
  • Low Dropout Voltage: 500mV at 1A Load
  • Adjustable Output Voltage with External Resistors
  • Internal Thermal Shutdown Protection
  • Short-Circuit Current Limiting
  • Available in an 8-pin PDIP package

Package and Quantity

The LT1376CN8-5#PBF is packaged in an 8-pin PDIP (Plastic Dual In-line Package). It is available in quantities specified by the manufacturer or distributor.

Specifications

  • Input Voltage Range: 2.7V to 40V
  • Output Voltage: 5V
  • Output Current: Up to 1.5A
  • Dropout Voltage: 500mV at 1A Load
  • Line Regulation: ±0.04% typical
  • Load Regulation: ±0.1% typical
  • Quiescent Current: 4mA typical
  • Operating Temperature Range: -40°C to 85°C
  • Package Type: 8-pin PDIP

Pin Configuration

The LT1376CN8-5#PBF has the following pin configuration:

```


| | --| VIN GND |-- Pin 1: VIN (Input Voltage) --| VOUT NC |-- Pin 2: VOUT (Output Voltage) --| FB NC |-- Pin 3: FB (Feedback) --| GND NC |-- Pin 4: GND (Ground) --| NC NC |-- Pin 5: Not Connected --| NC NC |-- Pin 6: Not Connected --| NC NC |-- Pin 7: Not Connected --| VCC NC |-- Pin 8: VCC (Supply Voltage) |___________| ```

Functional Features

  • Wide Input Voltage Range: The LT1376CN8-5#PBF can accept input voltages ranging from 2.7V to 40V, making it suitable for a wide range of applications.
  • Adjustable Output Voltage: The output voltage can be adjusted using external resistors, allowing flexibility in meeting specific voltage requirements.
  • Low Dropout Voltage: With a dropout voltage of only 500mV at 1A load, the LT1376CN8-5#PBF minimizes power dissipation and improves efficiency.
  • Thermal Shutdown Protection: Internal thermal shutdown protection prevents the IC from overheating, ensuring safe operation.
  • Short-Circuit Current Limiting: The device incorporates short-circuit current limiting to protect against excessive current flow during fault conditions.

Advantages and Disadvantages

Advantages

  • Wide input voltage range allows for versatile application scenarios.
  • Adjustable output voltage provides flexibility in meeting different voltage requirements.
  • Low dropout voltage enhances overall system efficiency.
  • Thermal shutdown protection ensures safe operation.
  • Short-circuit current limiting protects against excessive current flow.

Disadvantages

  • Limited to a maximum output current of 1.5A, which may not be sufficient for high-power applications.
  • The 8-pin PDIP package may limit its use in space-constrained designs.

Working Principles

The LT1376CN8-5#PBF is a voltage regulator that utilizes a feedback mechanism to maintain a stable output voltage. It operates by comparing the output voltage with a reference voltage and adjusting the internal circuitry to achieve the desired output voltage. The device incorporates various protection features, such as thermal shutdown and short-circuit current limiting, to ensure safe and reliable operation.

Application Field Plans

The LT1376CN8-5#PBF can be applied in various fields, including but not limited to: 1. Power supply circuits for electronic devices 2. Battery-powered systems requiring stable voltage regulation 3. Automotive electronics 4. Industrial control systems 5. Telecommunications equipment

Alternative Models

There are several alternative models available that offer similar functionality to the LT1376CN8-5#PBF. Some notable alternatives include: - LM317: Adjustable Linear Voltage Regulator - LM7805: Fixed 5V Linear Voltage Regulator - LT1763: Low Dropout Linear Voltage Regulator - LM2596: Switching Voltage Regulator

These alternative models provide different features and specifications, allowing users to choose the most suitable

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací LT1376CN8-5#PBF v technických řešeních

Sure! Here are 10 common questions and answers related to the application of LT1376CN8-5#PBF in technical solutions:

  1. Q: What is the LT1376CN8-5#PBF? A: The LT1376CN8-5#PBF is a step-down switching regulator IC that can convert higher voltage inputs to lower voltage outputs.

  2. Q: What is the input voltage range for the LT1376CN8-5#PBF? A: The LT1376CN8-5#PBF can accept input voltages ranging from 4V to 60V.

  3. Q: What is the output voltage range for the LT1376CN8-5#PBF? A: The LT1376CN8-5#PBF can provide output voltages as low as 1.235V.

  4. Q: What is the maximum output current of the LT1376CN8-5#PBF? A: The LT1376CN8-5#PBF can deliver a maximum output current of 5A.

  5. Q: What is the efficiency of the LT1376CN8-5#PBF? A: The efficiency of the LT1376CN8-5#PBF can reach up to 95%, depending on the input and output voltage conditions.

  6. Q: Does the LT1376CN8-5#PBF require an external compensation network? A: No, the LT1376CN8-5#PBF has internal compensation, so it does not require an external compensation network.

  7. Q: Can the LT1376CN8-5#PBF operate in a continuous or discontinuous mode? A: The LT1376CN8-5#PBF can operate in both continuous and discontinuous modes, depending on the load conditions.

  8. Q: What are the protection features of the LT1376CN8-5#PBF? A: The LT1376CN8-5#PBF includes features like overcurrent protection, thermal shutdown, and undervoltage lockout.

  9. Q: Can the LT1376CN8-5#PBF be used in automotive applications? A: Yes, the LT1376CN8-5#PBF is suitable for automotive applications as it can handle wide input voltage variations.

  10. Q: Are there any application notes or reference designs available for the LT1376CN8-5#PBF? A: Yes, Linear Technology (now part of Analog Devices) provides application notes and reference designs that can help with the implementation of the LT1376CN8-5#PBF in various technical solutions.

Please note that the answers provided here are general and may vary based on specific design requirements and conditions. It is always recommended to refer to the datasheet and relevant documentation for accurate information.