Intersil
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
ISL9014AIRBBZ
Zobrazit detail DataSheets

ISL9014AIRBBZ

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management IC

Characteristics: - Low Dropout Voltage Regulator - High Efficiency - Low Quiescent Current - Small Package Size - Wide Input Voltage Range

Package: 16-Lead Thin Shrink Small Outline Package (TSSOP)

Essence: The ISL9014AIRBBZ is a low dropout voltage regulator designed for power management applications. It provides a stable output voltage with high efficiency and low quiescent current.

Packaging/Quantity: The ISL9014AIRBBZ is available in a 16-lead TSSOP package. It is typically sold in reels of 2500 units.

Specifications

  • Input Voltage Range: 2.3V to 5.5V
  • Output Voltage Range: 0.8V to 3.6V
  • Dropout Voltage: 200mV at 300mA
  • Quiescent Current: 35µA
  • Output Current: Up to 300mA
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The ISL9014AIRBBZ has the following pin configuration:

  1. VIN: Input Voltage
  2. EN: Enable Pin
  3. GND: Ground
  4. FB: Feedback Pin
  5. VOUT: Output Voltage
  6. PG: Power Good Indicator
  7. NC: No Connection
  8. NC: No Connection
  9. NC: No Connection
  10. NC: No Connection
  11. NC: No Connection
  12. NC: No Connection
  13. NC: No Connection
  14. NC: No Connection
  15. NC: No Connection
  16. NC: No Connection

Functional Features

  • Low Dropout Voltage: The ISL9014AIRBBZ has a low dropout voltage of 200mV at 300mA, ensuring stable output voltage even with small input-output differentials.
  • High Efficiency: With its low quiescent current and high efficiency, the IC minimizes power dissipation and maximizes battery life in portable devices.
  • Power Good Indicator: The PG pin provides a signal indicating when the output voltage is within regulation limits, allowing for easy monitoring of the power supply status.

Advantages

  • Wide Input Voltage Range: The ISL9014AIRBBZ can operate with an input voltage range of 2.3V to 5.5V, making it suitable for a variety of applications.
  • Small Package Size: The 16-lead TSSOP package offers a compact form factor, saving valuable board space in electronic designs.
  • Low Quiescent Current: The IC's low quiescent current of 35µA helps minimize power consumption, particularly in battery-powered devices.

Disadvantages

  • Limited Output Current: The ISL9014AIRBBZ has a maximum output current of 300mA, which may not be sufficient for high-power applications.

Working Principles

The ISL9014AIRBBZ operates as a low dropout voltage regulator by maintaining a stable output voltage despite variations in input voltage and load conditions. It achieves this through a combination of feedback control and internal circuitry that adjusts the pass transistor to regulate the output voltage.

Detailed Application Field Plans

The ISL9014AIRBBZ is commonly used in various applications, including but not limited to: - Portable Devices: Smartphones, tablets, portable media players - Wearable Electronics: Fitness trackers, smartwatches - IoT Devices: Sensors, wireless modules - Industrial Equipment: Data loggers, measurement instruments

Alternative Models

Other alternative models that offer similar functionality to the ISL9014AIRBBZ include: - TPS7A05: Low Dropout Voltage Regulator from Texas Instruments - MCP1700: Low Quiescent Current LDO Regulator from Microchip - AP2112: Ultra-Low Dropout Linear Regulator from Diodes Incorporated

These alternative models can be considered based on specific application requirements and availability.

Word count: 431 words

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací ISL9014AIRBBZ v technických řešeních

Sure! Here are 10 common questions and answers related to the application of ISL9014AIRBBZ in technical solutions:

  1. Q: What is ISL9014AIRBBZ? A: ISL9014AIRBBZ is a highly integrated, low-power buck-boost switching regulator that provides a regulated output voltage from a wide input voltage range.

  2. Q: What are the typical applications of ISL9014AIRBBZ? A: ISL9014AIRBBZ is commonly used in battery-powered devices, portable medical equipment, industrial sensors, and other applications where a stable power supply is required.

  3. Q: What is the input voltage range supported by ISL9014AIRBBZ? A: The input voltage range of ISL9014AIRBBZ is typically between 2.5V and 5.5V.

  4. Q: What is the output voltage range provided by ISL9014AIRBBZ? A: ISL9014AIRBBZ can provide an adjustable output voltage ranging from 1.8V to 5.25V.

  5. Q: Can ISL9014AIRBBZ operate in both buck and boost modes? A: Yes, ISL9014AIRBBZ can operate in both buck (step-down) and boost (step-up) modes, allowing it to regulate the output voltage regardless of whether the input voltage is higher or lower than the desired output voltage.

  6. Q: What is the maximum output current supported by ISL9014AIRBBZ? A: ISL9014AIRBBZ can provide a maximum output current of up to 1.5A.

  7. Q: Does ISL9014AIRBBZ have built-in protection features? A: Yes, ISL9014AIRBBZ includes various protection features such as overcurrent protection, thermal shutdown, and undervoltage lockout to ensure safe operation.

  8. Q: Can ISL9014AIRBBZ be controlled using an external microcontroller? A: Yes, ISL9014AIRBBZ supports external control through its enable pin, allowing it to be easily integrated into a larger system.

  9. Q: What is the efficiency of ISL9014AIRBBZ? A: The efficiency of ISL9014AIRBBZ can reach up to 95%, making it suitable for power-sensitive applications.

  10. Q: Is ISL9014AIRBBZ available in different package options? A: Yes, ISL9014AIRBBZ is available in a compact 16-lead QFN package, which makes it suitable for space-constrained designs.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.