Intersil
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
ISL9012IRJMZ-T
Zobrazit detail DataSheets

ISL9012IRJMZ-T

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management IC

Characteristics: - Low dropout voltage regulator - High efficiency - Low quiescent current - Small package size - Wide input voltage range - Adjustable output voltage - Overcurrent and thermal protection

Package: 10-Lead DFN (3x3mm)

Essence: The ISL9012IRJMZ-T is a power management IC designed for low dropout voltage regulation in various electronic devices.

Packaging/Quantity: The ISL9012IRJMZ-T is available in tape and reel packaging, with 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V to 6.5V
  • Output Voltage Range: 0.8V to VIN
  • Dropout Voltage: 200mV at 600mA
  • Quiescent Current: 35µA
  • Output Current: Up to 600mA
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The ISL9012IRJMZ-T has the following pin configuration:

  1. EN (Enable)
  2. GND (Ground)
  3. FB (Feedback)
  4. VOUT (Output Voltage)
  5. VIN (Input Voltage)
  6. BYP (Bypass)
  7. NC (No Connection)
  8. NC (No Connection)
  9. NC (No Connection)
  10. PG (Power Good)

Functional Features

  • Low dropout voltage for efficient power conversion.
  • Adjustable output voltage to meet specific requirements.
  • Overcurrent and thermal protection for safe operation.
  • Power Good (PG) signal indicates stable output voltage.
  • Bypass (BYP) pin for improved noise performance.

Advantages and Disadvantages

Advantages: - High efficiency power conversion. - Wide input voltage range for versatility. - Small package size for space-constrained applications. - Overcurrent and thermal protection ensure device safety.

Disadvantages: - Limited output current compared to some other power management ICs. - Noisy output due to the absence of built-in noise reduction features.

Working Principles

The ISL9012IRJMZ-T is a low dropout voltage regulator that regulates the input voltage to a desired output voltage. It achieves this by using a pass transistor that adjusts its resistance based on the feedback received from the FB pin. The EN pin enables or disables the regulator, while the BYP pin provides an optional bypass path for improved noise performance.

Detailed Application Field Plans

The ISL9012IRJMZ-T can be used in various applications, including but not limited to: 1. Battery-powered devices 2. Portable electronics 3. IoT (Internet of Things) devices 4. Wearable devices 5. Industrial control systems

Alternative Models

Here are some alternative models that offer similar functionality to the ISL9012IRJMZ-T: 1. TPS7A05 - Texas Instruments 2. MCP1700 - Microchip Technology 3. LP2985 - Texas Instruments 4. NCP1117 - ON Semiconductor 5. AP2112 - Diodes Incorporated

These alternative models provide comparable features and can be considered as substitutes for the ISL9012IRJMZ-T in various applications.

Word count: 410 words

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací ISL9012IRJMZ-T v technických řešeních

Sure! Here are 10 common questions and answers related to the application of ISL9012IRJMZ-T in technical solutions:

  1. Q: What is the ISL9012IRJMZ-T? A: The ISL9012IRJMZ-T is a low dropout voltage regulator (LDO) designed for use in various technical solutions.

  2. Q: What is the input voltage range of the ISL9012IRJMZ-T? A: The input voltage range of the ISL9012IRJMZ-T is typically between 2.5V and 5.5V.

  3. Q: What is the output voltage range of the ISL9012IRJMZ-T? A: The output voltage range of the ISL9012IRJMZ-T can be adjusted from 0.8V to 3.6V using external resistors.

  4. Q: What is the maximum output current of the ISL9012IRJMZ-T? A: The ISL9012IRJMZ-T can provide a maximum output current of up to 300mA.

  5. Q: What is the dropout voltage of the ISL9012IRJMZ-T? A: The dropout voltage of the ISL9012IRJMZ-T is typically around 200mV at full load.

  6. Q: Is the ISL9012IRJMZ-T suitable for battery-powered applications? A: Yes, the low dropout voltage and low quiescent current make the ISL9012IRJMZ-T ideal for battery-powered applications.

  7. Q: Does the ISL9012IRJMZ-T have built-in thermal shutdown protection? A: Yes, the ISL9012IRJMZ-T includes thermal shutdown protection to prevent overheating.

  8. Q: Can the ISL9012IRJMZ-T operate in a wide temperature range? A: Yes, the ISL9012IRJMZ-T is designed to operate in a temperature range of -40°C to +85°C.

  9. Q: What package does the ISL9012IRJMZ-T come in? A: The ISL9012IRJMZ-T is available in a compact 6-pin DFN package.

  10. Q: Are there any evaluation boards or reference designs available for the ISL9012IRJMZ-T? A: Yes, Intersil provides evaluation boards and reference designs that can help with the implementation of the ISL9012IRJMZ-T in various applications.

Please note that these answers are general and may vary depending on the specific requirements and conditions of your technical solution.