Intersil
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
ISL8843AAUZ-T
Zobrazit detail DataSheets

ISL8843AAUZ-T

Product Overview

Category

ISL8843AAUZ-T belongs to the category of integrated circuits (ICs).

Use

It is commonly used in power management applications.

Characteristics

  • High efficiency
  • Low standby current
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection

Package

ISL8843AAUZ-T is available in a small outline package (SOP) with 8 pins.

Essence

The essence of ISL8843AAUZ-T lies in its ability to efficiently regulate and control power in various electronic devices.

Packaging/Quantity

ISL8843AAUZ-T is typically packaged in reels and comes in quantities of 2500 units per reel.

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 0.8V to 6V
  • Maximum Output Current: 3A
  • Switching Frequency: 500kHz
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

ISL8843AAUZ-T has the following pin configuration:

  1. VIN: Input voltage
  2. GND: Ground
  3. FB: Feedback pin for output voltage regulation
  4. COMP: Compensation pin for stability control
  5. EN: Enable pin for turning the IC on/off
  6. SS/TR: Soft-start/Tracking pin for controlling startup behavior
  7. LX: Switching node for connecting the external inductor
  8. VCC: Supply voltage for internal circuitry

Functional Features

  • Integrated synchronous buck converter
  • Constant frequency peak current mode control
  • Adjustable soft-start time
  • Overcurrent protection with hiccup mode
  • Thermal shutdown protection
  • Under-voltage lockout (UVLO) protection

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption
  • Wide input voltage range allows for versatile applications
  • Adjustable output voltage provides flexibility
  • Overcurrent and thermal shutdown protection enhance safety

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications
  • Requires external components for operation, increasing complexity

Working Principles

ISL8843AAUZ-T operates as a synchronous buck converter. It regulates the output voltage by controlling the duty cycle of the internal power switch. The feedback pin (FB) monitors the output voltage and adjusts the duty cycle accordingly. The compensation pin (COMP) ensures stability by compensating for any fluctuations. The soft-start/Tracking pin (SS/TR) controls the startup behavior, gradually ramping up the output voltage. The enable pin (EN) allows for on/off control of the IC.

Detailed Application Field Plans

ISL8843AAUZ-T finds application in various fields, including:

  1. Power supplies for consumer electronics
  2. Industrial automation systems
  3. LED lighting
  4. Telecommunications equipment
  5. Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to ISL8843AAUZ-T are:

  1. LM2596S-ADJ
  2. TPS5430
  3. LT8610AB
  4. MP2307DN
  5. MAX5033D

These models offer similar functionality and can be used as substitutes depending on specific requirements.

In conclusion, ISL8843AAUZ-T is an integrated circuit commonly used in power management applications. It offers high efficiency, adjustable output voltage, and various protection features. Its working principle involves regulating the output voltage through duty cycle control. It finds application in consumer electronics, industrial automation, LED lighting, telecommunications, and automotive electronics. Alternative models such as LM2596S-ADJ, TPS5430, LT8610AB, MP2307DN, and MAX5033D can be considered as substitutes.

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací ISL8843AAUZ-T v technických řešeních

Sure! Here are 10 common questions and answers related to the application of ISL8843AAUZ-T in technical solutions:

  1. Q: What is ISL8843AAUZ-T? A: ISL8843AAUZ-T is a high-performance synchronous buck controller IC used for voltage regulation in various technical applications.

  2. Q: What is the input voltage range supported by ISL8843AAUZ-T? A: The input voltage range supported by ISL8843AAUZ-T is typically between 4.5V and 14V.

  3. Q: What is the output voltage range that can be achieved using ISL8843AAUZ-T? A: The output voltage range achievable with ISL8843AAUZ-T depends on the external components used, but it can typically range from 0.6V to 5.5V.

  4. Q: What is the maximum output current that ISL8843AAUZ-T can handle? A: ISL8843AAUZ-T can handle a maximum output current of up to 20A, depending on the thermal design and external components used.

  5. Q: Can ISL8843AAUZ-T operate in a wide temperature range? A: Yes, ISL8843AAUZ-T is designed to operate in a wide temperature range, typically from -40°C to +85°C.

  6. Q: Does ISL8843AAUZ-T require an external compensation network? A: Yes, ISL8843AAUZ-T requires an external compensation network to stabilize the control loop and ensure proper voltage regulation.

  7. Q: Can ISL8843AAUZ-T support both synchronous and non-synchronous rectification? A: Yes, ISL8843AAUZ-T can support both synchronous and non-synchronous rectification, providing flexibility in design.

  8. Q: What is the switching frequency range of ISL8843AAUZ-T? A: The switching frequency range of ISL8843AAUZ-T is typically between 100kHz and 1MHz, allowing for efficient power conversion.

  9. Q: Does ISL8843AAUZ-T have built-in protection features? A: Yes, ISL8843AAUZ-T has built-in protection features such as overcurrent protection, overvoltage protection, and thermal shutdown.

  10. Q: Can ISL8843AAUZ-T be used in battery-powered applications? A: Yes, ISL8843AAUZ-T can be used in battery-powered applications, thanks to its low quiescent current and high efficiency design.

Please note that these answers are general and may vary depending on specific application requirements and design considerations.