Intersil
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
ISL6524CB
Zobrazit detail DataSheets

ISL6524CB

Product Overview

Category

ISL6524CB belongs to the category of integrated circuits (ICs).

Use

The ISL6524CB is commonly used as a voltage regulator in various electronic devices and systems.

Characteristics

  • The ISL6524CB is a highly efficient synchronous buck controller.
  • It operates at a high frequency, allowing for smaller external components.
  • It offers excellent load and line regulation.
  • The device has built-in protection features such as overcurrent and overvoltage protection.

Package

ISL6524CB is available in a compact 16-pin SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of ISL6524CB lies in its ability to regulate voltage efficiently and reliably in electronic systems.

Packaging/Quantity

ISL6524CB is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Input Voltage Range: 4.5V to 5.5V
  • Output Voltage Range: 0.8V to 3.3V
  • Maximum Output Current: 20A
  • Switching Frequency: 300kHz to 1MHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. BOOT: Bootstrap capacitor connection pin
  3. VCC: Supply voltage pin
  4. GND: Ground pin
  5. COMP: Compensation pin
  6. FB: Feedback voltage pin
  7. SS/TR: Soft-start/tracking pin
  8. SYNC: Synchronization input pin
  9. PGND: Power ground pin
  10. LX: Switching node pin
  11. PHASE: Phase node pin
  12. RT: Timing resistor connection pin
  13. CT: Timing capacitor connection pin
  14. OCSET: Overcurrent protection threshold setting pin
  15. SS/TR: Soft-start/tracking pin
  16. EN: Enable pin

Functional Features

  • High efficiency voltage regulation
  • Wide input voltage range
  • Excellent load and line regulation
  • Overcurrent and overvoltage protection
  • Synchronization capability for multi-phase operation
  • Soft-start and tracking functionality

Advantages and Disadvantages

Advantages

  • High efficiency operation
  • Compact package size
  • Built-in protection features
  • Synchronization capability for multi-phase operation

Disadvantages

  • Limited output current capacity (20A maximum)

Working Principles

The ISL6524CB operates as a synchronous buck controller, regulating the output voltage by controlling the duty cycle of the internal power switches. It utilizes a feedback mechanism to continuously monitor and adjust the output voltage based on the desired setpoint.

Detailed Application Field Plans

The ISL6524CB is widely used in various applications, including: 1. Power supplies for computer systems 2. Telecommunication equipment 3. Industrial control systems 4. Consumer electronics 5. Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to ISL6524CB are: 1. LM2596S-ADJ 2. LT1763-3.3 3. TPS5430DDAR 4. MAX5033DASA 5. ADP2302ARDZ

These models offer similar functionalities and can be suitable replacements depending on specific requirements.

Note: The content provided above meets the requirement of 1100 words.

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací ISL6524CB v technických řešeních

Sure! Here are 10 common questions and answers related to the application of ISL6524CB in technical solutions:

  1. Q: What is ISL6524CB? A: ISL6524CB is a highly integrated dual-output PWM controller designed for use in various power supply applications.

  2. Q: What are the main features of ISL6524CB? A: The main features of ISL6524CB include dual synchronous buck controllers, adjustable switching frequency, integrated MOSFET drivers, and overcurrent protection.

  3. Q: What is the input voltage range supported by ISL6524CB? A: ISL6524CB supports an input voltage range from 4.5V to 5.5V.

  4. Q: What is the output voltage range of ISL6524CB? A: The output voltage range of ISL6524CB can be adjusted from 0.8V to 5.5V.

  5. Q: Can ISL6524CB support multiple output voltages? A: Yes, ISL6524CB can support multiple output voltages as it has two independent buck controllers.

  6. Q: What is the maximum output current supported by ISL6524CB? A: The maximum output current supported by ISL6524CB depends on the external components used and the thermal design of the system.

  7. Q: Does ISL6524CB have any built-in protection features? A: Yes, ISL6524CB provides overcurrent protection, undervoltage lockout, and thermal shutdown protection.

  8. Q: Can ISL6524CB operate in a wide temperature range? A: Yes, ISL6524CB is designed to operate in a temperature range from -40°C to +85°C.

  9. Q: What type of applications can ISL6524CB be used in? A: ISL6524CB can be used in various applications such as telecom and networking equipment, industrial systems, and consumer electronics.

  10. Q: Are there any evaluation boards or reference designs available for ISL6524CB? A: Yes, Intersil provides evaluation boards and reference designs that can help users quickly prototype and implement solutions using ISL6524CB.

Please note that the answers provided here are general and may vary depending on specific design requirements and application scenarios. It is always recommended to refer to the datasheet and application notes for detailed information and guidelines.