Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
XC8221FRIAAFXUMA1

XC8221FRIAAFXUMA1

Product Overview

Category

XC8221FRIAAFXUMA1 belongs to the category of voltage regulators.

Use

This product is used for regulating voltage in electronic circuits.

Characteristics

  • Small size and lightweight
  • High efficiency
  • Low power consumption
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC8221FRIAAFXUMA1 comes in a compact surface-mount package.

Essence

The essence of XC8221FRIAAFXUMA1 lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

XC8221FRIAAFXUMA1 is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.0V
  • Output Current: Up to 200mA
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 50µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC8221FRIAAFXUMA1 has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (active high)

Functional Features

  • Voltage regulation: XC8221FRIAAFXUMA1 ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: The device automatically shuts down if the output current exceeds the specified limit.
  • Thermal shutdown protection: In case of excessive temperature, the regulator enters a thermal shutdown mode to prevent damage.

Advantages and Disadvantages

Advantages

  • Small size and lightweight make it suitable for compact electronic devices.
  • High efficiency results in less power dissipation and longer battery life.
  • Wide input voltage range allows compatibility with various power sources.

Disadvantages

  • Limited output current may not be sufficient for high-power applications.
  • Dropout voltage of 150mV may affect the performance in low-voltage scenarios.

Working Principles

XC8221FRIAAFXUMA1 operates on the principle of a linear voltage regulator. It uses a feedback mechanism to maintain a constant output voltage by adjusting the resistance within the device.

Detailed Application Field Plans

XC8221FRIAAFXUMA1 finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Wearable devices - IoT devices - Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC8221FRIAAFXUMA1 are: - XC6221: Similar voltage regulator with lower dropout voltage - XC9236: Higher output current capability - XC6206: Lower quiescent current for ultra-low power applications

Note: This is not an exhaustive list, and there are several other alternative models available in the market.

In conclusion, XC8221FRIAAFXUMA1 is a compact and efficient voltage regulator that provides stable voltage regulation for various electronic devices. Its small size, high efficiency, and wide input voltage range make it suitable for a wide range of applications. However, its limited output current and dropout voltage should be considered when selecting the appropriate model for specific requirements.

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací XC8221FRIAAFXUMA1 v technických řešeních

Sure! Here are 10 common questions and answers related to the application of XC8221FRIAAFXUMA1 in technical solutions:

Q1: What is XC8221FRIAAFXUMA1? A1: XC8221FRIAAFXUMA1 is a specific model of voltage regulator IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to provide stable and regulated power supply in various electronic applications.

Q2: What is the input voltage range for XC8221FRIAAFXUMA1? A2: The input voltage range for XC8221FRIAAFXUMA1 is typically between 2.5V and 6.0V.

Q3: What is the output voltage of XC8221FRIAAFXUMA1? A3: The output voltage of XC8221FRIAAFXUMA1 can be set to a fixed value within the range of 0.8V to 5.0V, depending on the specific configuration.

Q4: What is the maximum output current of XC8221FRIAAFXUMA1? A4: The maximum output current of XC8221FRIAAFXUMA1 is typically around 200mA, which makes it suitable for powering low-power devices or components.

Q5: Is XC8221FRIAAFXUMA1 a linear or switching regulator? A5: XC8221FRIAAFXUMA1 is a low-dropout (LDO) linear regulator, which means it regulates the output voltage by dissipating excess energy as heat.

Q6: Can XC8221FRIAAFXUMA1 operate in a wide temperature range? A6: Yes, XC8221FRIAAFXUMA1 is designed to operate reliably in a wide temperature range, typically from -40°C to +85°C.

Q7: Does XC8221FRIAAFXUMA1 have built-in protection features? A7: Yes, XC8221FRIAAFXUMA1 incorporates various protection features such as overcurrent protection, thermal shutdown, and reverse current protection.

Q8: What is the package type of XC8221FRIAAFXUMA1? A8: XC8221FRIAAFXUMA1 is available in a small surface-mount package called SOT-23-5, which has five pins.

Q9: Can XC8221FRIAAFXUMA1 be used in battery-powered applications? A9: Yes, XC8221FRIAAFXUMA1 is suitable for battery-powered applications due to its low quiescent current and efficient power conversion.

Q10: Are there any application notes or reference designs available for XC8221FRIAAFXUMA1? A10: Yes, Torex Semiconductor provides application notes and reference designs that can help users understand and implement XC8221FRIAAFXUMA1 in their technical solutions. These resources can be found on their official website.