Diodes Incorporated
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
PAM2306AYPAA_0

PAM2306AYPAA_0

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Regulator
  • Characteristics: Low dropout voltage, small package size, high efficiency
  • Package: SOT-23-5
  • Essence: Power management IC
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.5V to 5.5V
  • Output Voltage Range: 1.2V to 3.3V
  • Maximum Output Current: 300mA
  • Dropout Voltage: 200mV at 100mA
  • Quiescent Current: 60µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PAM2306AYPAA_0 has a total of five pins arranged in the following configuration: 1. VIN: Input voltage pin 2. GND: Ground pin 3. EN: Enable pin for turning the regulator on/off 4. FB: Feedback pin for setting the output voltage 5. VOUT: Output voltage pin

Functional Features

  • Low dropout voltage ensures efficient power conversion even with low input voltages.
  • Small package size (SOT-23-5) allows for space-saving designs.
  • High efficiency results in minimal power dissipation and longer battery life.
  • Enable pin provides control over the regulator's operation.
  • Feedback pin enables precise output voltage regulation.

Advantages and Disadvantages

Advantages: - Wide input voltage range allows for versatile applications. - Low dropout voltage minimizes power loss. - Small package size facilitates compact circuit designs. - High efficiency leads to improved energy utilization.

Disadvantages: - Limited maximum output current may restrict usage in high-power applications. - Quiescent current could be lower for further power savings.

Working Principles

The PAM2306AYPAA_0 is a voltage regulator IC that utilizes a low dropout linear regulator architecture. It regulates the input voltage to a stable output voltage by adjusting the internal pass transistor's resistance. The feedback pin (FB) is used to set the desired output voltage, while the enable pin (EN) controls the regulator's operation.

Detailed Application Field Plans

The PAM2306AYPAA_0 is commonly used in various portable electronic devices, such as smartphones, tablets, and wearable devices. It provides regulated power supply for microcontrollers, sensors, and other components within these devices. Its small package size and high efficiency make it suitable for space-constrained applications where power consumption needs to be optimized.

Detailed and Complete Alternative Models

  1. PAM2305AYPAA_0: Similar specifications and features, but with a lower maximum output current of 150mA.
  2. PAM2307AYPAA_0: Similar specifications and features, but with a higher maximum output current of 500mA.
  3. PAM2310AYPAA_0: Similar specifications and features, but with an adjustable output voltage range.

These alternative models offer flexibility in choosing the appropriate voltage regulator based on specific application requirements.

Word count: 322 words

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací PAM2306AYPAA_0 v technických řešeních

Sure! Here are 10 common questions and answers related to the application of PAM2306AYPAA_0 in technical solutions:

  1. Question: What is the PAM2306AYPAA0?
    Answer: The PAM2306AYPAA    0 is a power management integrated circuit (PMIC) that provides multiple voltage outputs for various applications.

  2. Question: What are the key features of the PAM2306AYPAA_0?
    Answer: The key features include dual-channel output, high efficiency, low quiescent current, over-temperature protection, and short-circuit protection.

  3. Question: What is the input voltage range supported by the PAM2306AYPAA0?
    Answer: The PAM2306AYPAA    0 supports an input voltage range of 2.5V to 5.5V.

  4. Question: What are the output voltage options available with the PAM2306AYPAA0?
    Answer: The PAM2306AYPAA    0 provides two output voltage options: VOUT1 and VOUT2, which can be set between 0.8V and 3.3V.

  5. Question: Can the PAM2306AYPAA0 handle high current loads?
    Answer: Yes, the PAM2306AYPAA    0 is capable of delivering up to 1.2A of continuous current per channel.

  6. Question: Is the PAM2306AYPAA0 suitable for battery-powered applications?
    Answer: Yes, the PAM2306AYPAA    0 has a low quiescent current and high efficiency, making it suitable for battery-powered applications where power consumption is critical.

  7. Question: Does the PAM2306AYPAA0 have any built-in protection features?
    Answer: Yes, the PAM2306AYPAA    0 includes over-temperature protection and short-circuit protection to ensure safe operation.

  8. Question: Can I use the PAM2306AYPAA0 in my mobile device design?
    Answer: Yes, the PAM2306AYPAA    0 is commonly used in mobile devices, such as smartphones and tablets, for power management applications.

  9. Question: Are there any application notes or reference designs available for the PAM2306AYPAA0?
    Answer: Yes, the manufacturer provides application notes and reference designs that can help you integrate the PAM2306AYPAA    0 into your technical solution.

  10. Question: Where can I purchase the PAM2306AYPAA0?
    Answer: The PAM2306AYPAA    0 can be purchased from authorized distributors or directly from the manufacturer's website.