Diodes Incorporated
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
AP2132MP-1.5TRG1
Zobrazit detail DataSheets

AP2132MP-1.5TRG1

Product Overview

Category

AP2132MP-1.5TRG1 belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High efficiency
  • Low dropout voltage
  • Adjustable output voltage
  • Overcurrent and thermal protection

Package

The AP2132MP-1.5TRG1 comes in a small outline package (SOT-23-5).

Essence

This voltage regulator is designed to provide a stable output voltage regardless of input voltage fluctuations.

Packaging/Quantity

The AP2132MP-1.5TRG1 is typically packaged in reels, with 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V to 6.5V
  • Output Voltage Range: 1.2V to 5.5V
  • Dropout Voltage: 200mV at 100mA
  • Maximum Output Current: 300mA
  • Quiescent Current: 50µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The AP2132MP-1.5TRG1 has five pins:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. FB: Feedback pin for adjusting the output voltage
  4. EN: Enable pin for turning the regulator on/off
  5. VOUT: Output voltage pin

Functional Features

  • High Efficiency: The AP2132MP-1.5TRG1 offers high efficiency, minimizing power loss during voltage regulation.
  • Low Dropout Voltage: With a low dropout voltage of only 200mV, this regulator can maintain a stable output even when the input voltage is close to the desired output voltage.
  • Adjustable Output Voltage: The output voltage can be adjusted within a wide range, allowing flexibility in various applications.
  • Overcurrent and Thermal Protection: The regulator incorporates overcurrent and thermal protection mechanisms to prevent damage to the device and the connected circuitry.

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption.
  • Adjustable output voltage allows for versatile use.
  • Overcurrent and thermal protection ensure device safety.

Disadvantages

  • Limited maximum output current of 300mA may not be suitable for high-power applications.
  • The SOT-23-5 package may require additional space on the PCB compared to smaller packages.

Working Principles

The AP2132MP-1.5TRG1 operates based on the principle of linear voltage regulation. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. This ensures that the output voltage remains constant despite variations in the input voltage.

Detailed Application Field Plans

The AP2132MP-1.5TRG1 finds application in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable audio players - Mobile phones - IoT devices - Embedded systems

Detailed and Complete Alternative Models

Some alternative models to the AP2132MP-1.5TRG1 include: - LM317: A popular adjustable linear voltage regulator with higher output current capability. - LT1763: A low dropout linear regulator with excellent line and load regulation. - TPS7A47: A high-performance, low-noise linear regulator suitable for sensitive applications.

These alternative models offer different features and specifications, providing options for specific requirements in voltage regulation applications.

Word count: 399 words

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací AP2132MP-1.5TRG1 v technických řešeních

  1. What is the input voltage range for AP2132MP-1.5TRG1?
    - The input voltage range for AP2132MP-1.5TRG1 is 2.7V to 6.0V.

  2. What is the typical output current of AP2132MP-1.5TRG1?
    - The typical output current of AP2132MP-1.5TRG1 is 300mA.

  3. Can AP2132MP-1.5TRG1 be used in battery-powered applications?
    - Yes, AP2132MP-1.5TRG1 is suitable for battery-powered applications due to its low quiescent current.

  4. What is the operating temperature range of AP2132MP-1.5TRG1?
    - The operating temperature range of AP2132MP-1.5TRG1 is -40°C to 85°C.

  5. Does AP2132MP-1.5TRG1 require an external compensation network?
    - No, AP2132MP-1.5TRG1 has an integrated compensation network, simplifying design and reducing external components.

  6. Can AP2132MP-1.5TRG1 be used in automotive electronics?
    - Yes, AP2132MP-1.5TRG1 is AEC-Q100 qualified and suitable for automotive applications.

  7. What is the dropout voltage of AP2132MP-1.5TRG1?
    - The dropout voltage of AP2132MP-1.5TRG1 is typically 240mV at 150mA load.

  8. Is AP2132MP-1.5TRG1 available in a small package for space-constrained designs?
    - Yes, AP2132MP-1.5TRG1 is available in a compact SOT-23 package.

  9. Can AP2132MP-1.5TRG1 be used in noise-sensitive applications?
    - Yes, AP2132MP-1.5TRG1 features low output noise, making it suitable for noise-sensitive applications.

  10. What are the key advantages of using AP2132MP-1.5TRG1 in technical solutions?
    - The key advantages of AP2132MP-1.5TRG1 include high efficiency, low quiescent current, and a wide input voltage range, making it versatile for various technical solutions.