Diodes Incorporated
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
AP2113AMTR-G1
Zobrazit detail DataSheets

AP2113AMTR-G1

Product Overview

Category

The AP2113AMTR-G1 belongs to the category of low dropout (LDO) linear voltage regulators.

Use

It is commonly used to provide a stable voltage output for various electronic devices and circuits.

Characteristics

  • Low dropout voltage
  • Low quiescent current
  • Overcurrent and thermal protection
  • Wide input voltage range

Package

The AP2113AMTR-G1 is available in a small form factor, such as SOT-23 and TSOT-23 packages.

Essence

The essence of this product lies in its ability to regulate voltage with minimal power loss and high efficiency.

Packaging/Quantity

It is typically packaged in reels or tubes and is available in varying quantities depending on the supplier.

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 1.2V to 5.0V
  • Dropout Voltage: 300mV at 600mA
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The AP2113AMTR-G1 typically has three pins: 1. VIN (Input Voltage) 2. GND (Ground) 3. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage
  • Thermal shutdown protection
  • Short-circuit current limit
  • Reverse current protection

Advantages and Disadvantages

Advantages

  • Low dropout voltage enables efficient regulation
  • Wide input voltage range allows for versatile applications
  • Thermal and overcurrent protection enhance reliability

Disadvantages

  • Limited maximum output current compared to some other LDO regulators
  • Higher quiescent current compared to certain ultra-low-power regulators

Working Principles

The AP2113AMTR-G1 works by comparing the reference voltage with the feedback voltage to adjust the pass transistor's resistance, thereby regulating the output voltage.

Detailed Application Field Plans

This regulator is suitable for various battery-powered applications, portable devices, and low-power systems where a stable voltage supply is essential. It can also be used in sensor modules, IoT devices, and handheld consumer electronics.

Detailed and Complete Alternative Models

Some alternative models to the AP2113AMTR-G1 include the MIC5205, MCP1700, and TLV702.

In conclusion, the AP2113AMTR-G1 is a versatile low dropout linear voltage regulator with a wide input voltage range and essential protection features, making it suitable for a variety of low-power electronic applications.

Word Count: 370

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací AP2113AMTR-G1 v technických řešeních

  1. What is the operating voltage range of AP2113AMTR-G1?

    • The operating voltage range of AP2113AMTR-G1 is 2.5V to 5.5V.

  2. What is the maximum output current of AP2113AMTR-G1?

    • The maximum output current of AP2113AMTR-G1 is 600mA.

  3. What is the typical dropout voltage of AP2113AMTR-G1?

    • The typical dropout voltage of AP2113AMTR-G1 is 300mV at 300mA load.

  4. What are the typical applications for AP2113AMTR-G1?

    • AP2113AMTR-G1 is commonly used in battery-powered devices, portable equipment, and low-voltage microcontroller systems.

  5. Does AP2113AMTR-G1 have built-in thermal shutdown protection?

    • Yes, AP2113AMTR-G1 features built-in thermal shutdown protection.

  6. What is the typical quiescent current of AP2113AMTR-G1?

    • The typical quiescent current of AP2113AMTR-G1 is 22µA.

  7. Is AP2113AMTR-G1 available in a SOT-23 package?

    • Yes, AP2113AMTR-G1 is available in a SOT-23 package.

  8. What is the typical output voltage accuracy of AP2113AMTR-G1?

    • The typical output voltage accuracy of AP2113AMTR-G1 is ±2%.

  9. Can AP2113AMTR-G1 be used in automotive applications?

    • Yes, AP2113AMTR-G1 is suitable for automotive applications.

  10. Does AP2113AMTR-G1 require an external compensation capacitor?

    • No, AP2113AMTR-G1 does not require an external compensation capacitor.