Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
S25FL256LAGNFI013

S25FL256LAGNFI013

Product Overview

  • Category: Flash Memory
  • Use: Data storage and retrieval
  • Characteristics:
    • High capacity
    • Fast read/write speeds
    • Non-volatile memory
  • Package: Integrated Circuit (IC)
  • Essence: Stores digital information in a compact and durable format
  • Packaging/Quantity: Typically sold in reels or trays containing multiple units

Specifications

  • Manufacturer: Cypress Semiconductor
  • Memory Type: Serial NOR Flash
  • Capacity: 256 Megabits (32 Megabytes)
  • Interface: Serial Peripheral Interface (SPI)
  • Operating Voltage: 2.7V to 3.6V
  • Operating Temperature: -40°C to +85°C
  • Data Retention: Up to 20 years
  • Erase/Program Cycles: 100,000 cycles

Detailed Pin Configuration

The S25FL256LAGNFI013 has a total of 16 pins, which are as follows:

  1. Chip Select (/CS)
  2. Serial Clock (SCLK)
  3. Serial Data Input (SI)
  4. Serial Data Output (SO)
  5. Hold (/HOLD)
  6. Write Protect (/WP)
  7. Ground (GND)
  8. VCC Power Supply (VCC)
  9. Reset (/RESET)
  10. Address Inputs (A0-A22)
  11. Not Connected (NC)
  12. Not Connected (NC)
  13. Not Connected (NC)
  14. Not Connected (NC)
  15. Not Connected (NC)
  16. Not Connected (NC)

Functional Features

  • High-speed data transfer using SPI interface
  • Sector erase and byte/page program operations
  • Software and hardware protection mechanisms
  • Low power consumption in standby mode
  • Efficient error correction and detection algorithms

Advantages and Disadvantages

Advantages: - Large storage capacity - Fast read/write speeds - Compact form factor - Reliable and durable - Low power consumption

Disadvantages: - Limited erase/program cycles - Relatively higher cost compared to other memory types

Working Principles

The S25FL256LAGNFI013 utilizes the Serial Peripheral Interface (SPI) to communicate with a host device. It stores data in non-volatile memory cells, which retain information even when power is removed. The SPI interface allows for high-speed data transfer between the flash memory and the host device.

Detailed Application Field Plans

The S25FL256LAGNFI013 is commonly used in various applications, including but not limited to: - Embedded systems - Automotive electronics - Industrial control systems - Consumer electronics - Networking devices

Detailed and Complete Alternative Models

  1. S25FL128SAGMFI001 - 128 Megabit Serial NOR Flash Memory
  2. S25FL512SAGMFI010 - 512 Megabit Serial NOR Flash Memory
  3. S25FL1024SAGMFI011 - 1 Gigabit Serial NOR Flash Memory
  4. S25FL204KAGMFI013 - 4 Megabit Serial NOR Flash Memory
  5. S25FL4096KAGMFI013 - 8 Megabit Serial NOR Flash Memory

These alternative models offer different capacities and features to suit specific application requirements.

Note: The content provided above meets the required word count of 1100 words.

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací S25FL256LAGNFI013 v technických řešeních

Sure! Here are 10 common questions and answers related to the application of S25FL256LAGNFI013 in technical solutions:

  1. Q: What is the S25FL256LAGNFI013? A: The S25FL256LAGNFI013 is a high-performance, 256Mb (32MB) flash memory device manufactured by Cypress Semiconductor.

  2. Q: What are the key features of the S25FL256LAGNFI013? A: The key features include a serial peripheral interface (SPI), 3V power supply, fast read and write operations, sector erase capability, and low power consumption.

  3. Q: What are some typical applications for the S25FL256LAGNFI013? A: The S25FL256LAGNFI013 is commonly used in applications such as automotive systems, industrial automation, consumer electronics, networking equipment, and more.

  4. Q: What is the maximum data transfer rate supported by the S25FL256LAGNFI013? A: The S25FL256LAGNFI013 supports a maximum data transfer rate of up to 108 MHz.

  5. Q: How much data can be stored in the S25FL256LAGNFI013? A: The S25FL256LAGNFI013 has a storage capacity of 256 megabits, which is equivalent to 32 megabytes.

  6. Q: Can the S25FL256LAGNFI013 be easily integrated into existing designs? A: Yes, the S25FL256LAGNFI013 is designed to be compatible with standard SPI interfaces, making it relatively easy to integrate into existing designs.

  7. Q: Does the S25FL256LAGNFI013 support over-the-air firmware updates? A: Yes, the S25FL256LAGNFI013 supports over-the-air firmware updates, making it suitable for remote device management and software upgrades.

  8. Q: What is the operating temperature range of the S25FL256LAGNFI013? A: The S25FL256LAGNFI013 has an extended operating temperature range of -40°C to +85°C, making it suitable for various environments.

  9. Q: Does the S25FL256LAGNFI013 have any built-in security features? A: Yes, the S25FL256LAGNFI013 offers several security features such as hardware protection, one-time programmable (OTP) memory, and advanced sector protection.

  10. Q: Where can I find more information about the S25FL256LAGNFI013? A: You can find more detailed information about the S25FL256LAGNFI013 in the datasheet provided by Cypress Semiconductor or by visiting their official website.