Cypress Semiconductor Corp
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
MB96F388HSBPMC-GSE2

MB96F388HSBPMC-GSE2

Product Overview

Category: Microcontroller
Use: Embedded systems, IoT devices
Characteristics: High-performance, low-power consumption
Package: LQFP-64
Essence: Advanced microcontroller for various applications
Packaging/Quantity: Tray packaging, 250 units per tray

Specifications

  • Architecture: ARM Cortex-M0+
  • Clock Speed: Up to 32 MHz
  • Flash Memory: 128 KB
  • RAM: 8 KB
  • Operating Voltage: 2.7V - 5.5V
  • I/O Pins: 48
  • Communication Interfaces: UART, SPI, I2C
  • Analog-to-Digital Converter (ADC): 10-bit, 8 channels
  • Timers/Counters: 16-bit, 4 channels
  • Operating Temperature: -40°C to +85°C

Detailed Pin Configuration

The MB96F388HSBPMC-GSE2 microcontroller has a total of 64 pins in the LQFP package. The pin configuration is as follows:

  1. VDD
  2. GND
  3. P00
  4. P01
  5. P02
  6. P03
  7. P04
  8. P05
  9. P06
  10. P07
  11. P10
  12. P11
  13. P12
  14. P13
  15. P14
  16. P15
  17. P16
  18. P17
  19. P20
  20. P21
  21. P22
  22. P23
  23. P24
  24. P25
  25. P26
  26. P27
  27. P30
  28. P31
  29. P32
  30. P33
  31. P34
  32. P35
  33. P36
  34. P37
  35. P40
  36. P41
  37. P42
  38. P43
  39. P44
  40. P45
  41. P46
  42. P47
  43. P50
  44. P51
  45. P52
  46. P53
  47. P54
  48. P55
  49. P56
  50. P57
  51. RESET
  52. XTAL1
  53. XTAL2
  54. VDDA
  55. AVSS
  56. AVREF
  57. VBAT
  58. VDDIO
  59. VDDPLL
  60. GNDPLL
  61. PLLIN
  62. PLLOUT
  63. TEST0
  64. TEST1

Functional Features

  • High-performance ARM Cortex-M0+ core for efficient processing
  • Low-power consumption for extended battery life in portable devices
  • Ample flash memory and RAM for storing and executing complex programs
  • Multiple communication interfaces for seamless connectivity with other devices
  • Analog-to-Digital Converter (ADC) for accurate analog signal measurements
  • Timers/Counters for precise timing and event counting

Advantages and Disadvantages

Advantages: - Powerful processing capabilities - Low power consumption - Ample memory for data storage - Versatile communication interfaces - Accurate analog signal measurement

Disadvantages: - Limited number of I/O pins - Relatively higher cost compared to some alternatives

Working Principles

The MB96F388HSBPMC-GSE2 microcontroller operates based on the ARM Cortex-M0+ architecture. It executes instructions stored in its flash memory, processes data, and communicates with external devices through various interfaces. The microcontroller's low-power design ensures efficient operation, making it suitable for battery-powered applications.

Detailed Application Field Plans

The MB96F388HSBPMC-GSE2 microcontroller finds applications in various fields, including but not limited to: - Home automation systems - Industrial control systems - Automotive electronics - Consumer electronics - Internet of Things (IoT) devices

Detailed and Complete Alternative Models

  1. MB96F387HSBPMC-GSE2: Similar specifications with a different pin configuration.
  2. MB96F389HSBPMC-GSE2: Higher flash memory capacity and additional features.
  3. MB96F386HSBPMC-GSE2: Lower-cost alternative with reduced memory and features.

These alternative models offer similar functionality and can be considered based on specific project requirements.

Word count: 420 words

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací MB96F388HSBPMC-GSE2 v technických řešeních

Sure! Here are 10 common questions and answers related to the application of MB96F388HSBPMC-GSE2 in technical solutions:

1. What is the MB96F388HSBPMC-GSE2 microcontroller? The MB96F388HSBPMC-GSE2 is a microcontroller from Fujitsu that offers high performance and low power consumption, making it suitable for various technical solutions.

2. What are the key features of the MB96F388HSBPMC-GSE2? Some key features of this microcontroller include a 32-bit RISC CPU, on-chip flash memory, multiple communication interfaces, analog-to-digital converters, and various timers.

3. What technical solutions can the MB96F388HSBPMC-GSE2 be used for? The MB96F388HSBPMC-GSE2 can be used in a wide range of applications such as industrial automation, consumer electronics, automotive systems, smart appliances, and more.

4. How much flash memory does the MB96F388HSBPMC-GSE2 have? The MB96F388HSBPMC-GSE2 has a built-in flash memory with a capacity of 256 KB, which allows for storing program code and data.

5. Can I expand the memory of the MB96F388HSBPMC-GSE2? Yes, the microcontroller supports external memory expansion through its memory bus interface, allowing you to connect additional memory devices if needed.

6. What communication interfaces are available on the MB96F388HSBPMC-GSE2? The microcontroller provides UART, SPI, I2C, and CAN interfaces, enabling seamless communication with other devices or peripherals.

7. Does the MB96F388HSBPMC-GSE2 support analog inputs? Yes, the microcontroller features multiple analog-to-digital converters (ADCs), allowing you to interface with analog sensors or signals.

8. Can I use the MB96F388HSBPMC-GSE2 for real-time applications? Absolutely! The microcontroller offers various timers and interrupt capabilities, making it suitable for real-time applications that require precise timing or event handling.

9. What development tools are available for programming the MB96F388HSBPMC-GSE2? Fujitsu provides a comprehensive development environment, including an integrated development environment (IDE), compilers, debuggers, and other software tools to facilitate programming and debugging.

10. Is technical documentation available for the MB96F388HSBPMC-GSE2? Yes, Fujitsu provides detailed technical documentation, including datasheets, user manuals, application notes, and reference designs, which can be accessed on their official website.