ADP162ACBZ-4.2-R7

Overview

Product Category

ADP162ACBZ-4.2-R7 belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

Voltage regulation capabilities
Power management features
Compact size
High efficiency
Wide input voltage range

Package

ADP162ACBZ-4.2-R7 is available in a small outline package (SOP) with a specific pin configuration.

Essence

The essence of ADP162ACBZ-4.2-R7 lies in its ability to regulate and manage power supply efficiently in electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tubes, and the quantity per package may vary depending on the supplier.

Specifications

Input Voltage Range: 2.7V to 5.5V
Output Voltage: 4.2V
Output Current: Up to 600mA
Quiescent Current: 30µA (typical)
Operating Temperature Range: -40°C to +85°C

Pin Configuration

The detailed pin configuration of ADP162ACBZ-4.2-R7 is as follows:

VIN (Input Voltage)
GND (Ground)
EN (Enable)
FB (Feedback)
VOUT (Output Voltage)

Functional Features

Low dropout voltage
Overcurrent protection
Thermal shutdown protection
Soft start functionality
Adjustable output voltage

Advantages

High efficiency leads to reduced power consumption
Wide input voltage range allows compatibility with various power sources
Compact size enables integration into space-constrained designs
Overcurrent and thermal protection enhance device safety

Disadvantages

Limited output current may not be suitable for high-power applications
Fixed output voltage may not meet the requirements of all devices

Working Principles

ADP162ACBZ-4.2-R7 operates based on a switching regulator principle. It takes an input voltage within the specified range and converts it to a regulated 4.2V output voltage using internal control circuitry.

Detailed Application Field Plans

ADP162ACBZ-4.2-R7 finds application in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless headsets - Handheld gaming consoles

Alternative Models

ADP162ACBZ-3.3-R7: Output voltage of 3.3V
ADP162ACBZ-5.0-R7: Output voltage of 5.0V
ADP162ACBZ-2.8-R7: Output voltage of 2.8V

These alternative models provide different output voltage options to cater to specific device requirements.

In conclusion, ADP162ACBZ-4.2-R7 is an integrated circuit used for voltage regulation and power management in electronic devices. Its compact size, high efficiency, and wide input voltage range make it suitable for various applications. However, its limited output current and fixed output voltage may pose limitations in certain scenarios. The product operates based on a switching regulator principle and can be found in mobile phones, portable media players, digital cameras, wireless headsets, and handheld gaming consoles. Alternative models with different output voltages are available to accommodate diverse device needs.

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací ADP162ACBZ-4.2-R7 v technických řešeních

Sure! Here are 10 common questions and answers related to the application of ADP162ACBZ-4.2-R7 in technical solutions:

Q: What is the ADP162ACBZ-4.2-R7? A: The ADP162ACBZ-4.2-R7 is a specific model of voltage regulator IC (integrated circuit) manufactured by Analog Devices.
Q: What is the purpose of the ADP162ACBZ-4.2-R7? A: The ADP162ACBZ-4.2-R7 is designed to regulate and stabilize voltage levels in electronic circuits, ensuring consistent power supply to connected components.
Q: What is the input voltage range for the ADP162ACBZ-4.2-R7? A: The ADP162ACBZ-4.2-R7 has an input voltage range of typically 2.5V to 5.5V.
Q: What is the output voltage of the ADP162ACBZ-4.2-R7? A: The ADP162ACBZ-4.2-R7 provides a fixed output voltage of 4.2V.
Q: What is the maximum output current of the ADP162ACBZ-4.2-R7? A: The ADP162ACBZ-4.2-R7 can deliver a maximum output current of up to 500mA.
Q: Is the ADP162ACBZ-4.2-R7 suitable for battery-powered applications? A: Yes, the ADP162ACBZ-4.2-R7 is designed to be highly efficient and is suitable for battery-powered applications.
Q: Does the ADP162ACBZ-4.2-R7 have built-in protection features? A: Yes, the ADP162ACBZ-4.2-R7 includes various protection features such as thermal shutdown, current limit, and reverse current protection.
Q: Can the ADP162ACBZ-4.2-R7 be used in automotive applications? A: Yes, the ADP162ACBZ-4.2-R7 is automotive qualified and can be used in automotive applications.
Q: What package does the ADP162ACBZ-4.2-R7 come in? A: The ADP162ACBZ-4.2-R7 is available in a small SOT-23 package.
Q: Are there any application notes or reference designs available for the ADP162ACBZ-4.2-R7? A: Yes, Analog Devices provides application notes and reference designs that can help with the implementation of the ADP162ACBZ-4.2-R7 in various technical solutions.

Please note that the answers provided here are general and may vary depending on specific requirements and use cases. It's always recommended to refer to the datasheet and documentation provided by the manufacturer for accurate information.