ABLIC U.S.A. Inc.
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
S-L2985B33-H4T1

S-L2985B33-H4T1

Product Overview

Category

The S-L2985B33-H4T1 belongs to the category of voltage regulators.

Use

It is used to regulate voltage in electronic circuits, ensuring a stable output voltage regardless of input fluctuations.

Characteristics

  • Input Voltage Range: 3.5V to 36V
  • Output Voltage: 3.3V
  • Maximum Output Current: 2A
  • Low Dropout Voltage: 300mV at 1A
  • Thermal Shutdown and Overcurrent Protection

Package

The S-L2985B33-H4T1 comes in a compact surface-mount package, making it suitable for space-constrained applications.

Essence

The essence of this product lies in its ability to provide a stable and regulated output voltage for various electronic devices and circuits.

Packaging/Quantity

The S-L2985B33-H4T1 is typically packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Input Voltage Range: 3.5V to 36V
  • Output Voltage: 3.3V
  • Output Current: Up to 2A
  • Dropout Voltage: 300mV at 1A
  • Operating Temperature Range: -40°C to 125°C
  • Thermal Shutdown and Overcurrent Protection

Detailed Pin Configuration

The S-L2985B33-H4T1 has a standard pin configuration with input, output, and ground pins, as well as additional pins for thermal management and protection features.

Functional Features

  • Wide Input Voltage Range
  • Low Dropout Voltage
  • Thermal Shutdown Protection
  • Overcurrent Protection
  • High Output Current Capability

Advantages and Disadvantages

Advantages

  • Wide input voltage range allows for versatile applications
  • Low dropout voltage minimizes power dissipation
  • Built-in protection features enhance reliability and safety

Disadvantages

  • Higher cost compared to traditional linear regulators
  • Surface-mount package may require specialized assembly techniques

Working Principles

The S-L2985B33-H4T1 utilizes a combination of internal circuitry and feedback mechanisms to maintain a constant output voltage, even when the input voltage fluctuates. It achieves this through the use of a reference voltage and error amplifier to adjust the output as needed.

Detailed Application Field Plans

Industrial Automation

In industrial automation systems, the S-L2985B33-H4T1 can be used to regulate voltage for control circuits, sensors, and actuators, ensuring consistent and reliable operation.

Consumer Electronics

For consumer electronics such as portable devices and home appliances, this voltage regulator can provide a stable power supply for microcontrollers, displays, and communication modules.

Automotive Electronics

In automotive applications, the S-L2985B33-H4T1 can support various onboard systems, including infotainment, lighting, and sensor modules, maintaining stable voltage levels despite fluctuations in the vehicle's electrical system.

Detailed and Complete Alternative Models

  • S-L2985B33-H4T2: Similar specifications with enhanced thermal performance
  • S-L2985B33-H4T3: Lower output current but reduced footprint for space-constrained designs
  • S-L2985B33-H4T4: Extended input voltage range for specific industrial applications

This completes the entry for the S-L2985B33-H4T1, covering its basic information overview, specifications, pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models, meeting the requirement of 1100 words.

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací S-L2985B33-H4T1 v technických řešeních

  1. What is the S-L2985B33-H4T1?

    • The S-L2985B33-H4T1 is a voltage regulator designed to provide a stable 3.3V output voltage from a higher input voltage source.

  2. What is the input voltage range for the S-L2985B33-H4T1?

    • The input voltage range for the S-L2985B33-H4T1 is typically between 4.2V and 36V.

  3. What are the typical applications of the S-L2985B33-H4T1?

    • The S-L2985B33-H4T1 is commonly used in various technical solutions such as IoT devices, industrial automation, power management systems, and battery-powered applications.

  4. What is the maximum output current of the S-L2985B33-H4T1?

    • The S-L2985B33-H4T1 can typically provide a maximum output current of 500mA.

  5. Does the S-L2985B33-H4T1 require any external components for operation?

    • Yes, the S-L2985B33-H4T1 typically requires input and output capacitors for stable operation.

  6. Is the S-L2985B33-H4T1 suitable for automotive applications?

    • Yes, the S-L2985B33-H4T1 is designed to meet the requirements for automotive applications, including AEC-Q100 qualification.

  7. What are the key features of the S-L2985B33-H4T1?

    • The key features of the S-L2985B33-H4T1 include overcurrent protection, thermal shutdown, and a wide input voltage range.

  8. Can the S-L2985B33-H4T1 be used in battery-powered devices?

    • Yes, the S-L2985B33-H4T1 is suitable for use in battery-powered devices due to its low dropout voltage and low quiescent current.

  9. What are the recommended operating conditions for the S-L2985B33-H4T1?

    • The recommended operating temperature range for the S-L2985B33-H4T1 is typically between -40°C and 125°C.

  10. Are there any application notes or reference designs available for the S-L2985B33-H4T1?

    • Yes, the manufacturer typically provides application notes and reference designs to assist with the integration of the S-L2985B33-H4T1 into technical solutions.