Viz Specifikace pro podrobnosti o produktu.
S-817B51AMC-CXOT2G
Product Overview
Category
S-817B51AMC-CXOT2G belongs to the category of voltage regulators.
Use
This product is primarily used for voltage regulation in electronic circuits.
Characteristics
- Low dropout voltage
- Low quiescent current
- High ripple rejection ratio
- Built-in overcurrent protection
- Thermal shutdown protection
Package
The S-817B51AMC-CXOT2G comes in a small surface-mount package.
Essence
The essence of this product lies in its ability to regulate voltage efficiently and reliably in various electronic applications.
Packaging/Quantity
The S-817B51AMC-CXOT2G is typically packaged in reels, with a quantity of 3000 units per reel.
Specifications
- Input Voltage Range: 2.0V to 6.0V
- Output Voltage Range: 1.5V to 5.0V (selectable in 0.1V steps)
- Dropout Voltage: 160mV (typical at 100mA output current)
- Quiescent Current: 30μA (typical)
- Ripple Rejection Ratio: 70dB (typical at 1kHz)
- Overcurrent Protection: Built-in
- Thermal Shutdown Protection: Built-in
Detailed Pin Configuration
The S-817B51AMC-CXOT2G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
Functional Features
- Low dropout voltage ensures efficient voltage regulation even when the input voltage is close to the desired output voltage.
- Low quiescent current minimizes power consumption during standby or idle periods.
- High ripple rejection ratio filters out unwanted noise from the input voltage, resulting in a cleaner output.
- Built-in overcurrent protection safeguards the circuit from excessive current flow.
- Thermal shutdown protection prevents the device from overheating, ensuring its longevity and reliability.
Advantages and Disadvantages
Advantages
- Efficient voltage regulation with low dropout voltage
- Low power consumption during standby periods
- Effective noise filtering with high ripple rejection ratio
- Built-in overcurrent and thermal protection for enhanced safety and reliability
Disadvantages
- Limited input voltage range (2.0V to 6.0V)
- Output voltage selection limited to 1.5V to 5.0V in 0.1V steps
Working Principles
The S-817B51AMC-CXOT2G utilizes a combination of internal circuitry and feedback mechanisms to regulate the output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry accordingly to maintain a stable output voltage within the specified range.
Detailed Application Field Plans
The S-817B51AMC-CXOT2G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics - Medical equipment
Detailed and Complete Alternative Models
- S-817A50ANB-CUPT2G
- S-817A50ANB-DQBT2G
- S-817A50ANB-DQCT2G
- S-817A50ANB-DQDT2G
- S-817A50ANB-DQET2G
- S-817A50ANB-DQFT2G
- S-817A50ANB-DQGT2G
- S-817A50ANB-DQHT2G
- S-817A50ANB-DQJT2G
- S-817A50ANB-DQKT2G
These alternative models offer similar functionality and characteristics to the S-817B51AMC-CXOT2G, providing flexibility in design choices.
Note: The above content is approximately 400 words. Additional information can be added to meet the required word count of 1100 words.
Seznam 10 běžných otázek a odpovědí souvisejících s aplikací S-817B51AMC-CXOT2G v technických řešeních
Sure! Here are 10 common questions and answers related to the application of S-817B51AMC-CXOT2G in technical solutions:
Q: What is the S-817B51AMC-CXOT2G? A: The S-817B51AMC-CXOT2G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the typical operating voltage range of the S-817B51AMC-CXOT2G? A: The typical operating voltage range is from 0.8V to 6.0V.
Q: How does the S-817B51AMC-CXOT2G help in technical solutions? A: It ensures proper functioning of electronic devices by monitoring the power supply voltage and generating a reset signal to initiate a system reset when the voltage falls below a specified level.
Q: Can the S-817B51AMC-CXOT2G be used in battery-powered applications? A: Yes, it can be used in battery-powered applications as it operates within a wide voltage range and consumes very low current.
Q: What is the output type of the S-817B51AMC-CXOT2G? A: The S-817B51AMC-CXOT2G has an open-drain output type.
Q: What is the typical reset threshold voltage of the S-817B51AMC-CXOT2G? A: The typical reset threshold voltage is 2.93V.
Q: Does the S-817B51AMC-CXOT2G have a built-in delay circuit for the reset signal? A: Yes, it has a built-in delay circuit that provides a fixed delay time of approximately 200ms.
Q: Can the S-817B51AMC-CXOT2G be used in automotive applications? A: Yes, it is suitable for automotive applications as it meets the AEC-Q100 Grade 1 requirements.
Q: What is the package type of the S-817B51AMC-CXOT2G? A: The S-817B51AMC-CXOT2G comes in a small SOT-23-5 package.
Q: Is the S-817B51AMC-CXOT2G RoHS compliant? A: Yes, it is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.
Please note that these answers are based on general information and may vary depending on specific application requirements.